Shipping calculator

Sale

All products on Sale

Information

Contact Us

Dillon XL650

  • NewTube Assembly 9/38/40 for Mini XL650 Case Feeder
    Tube Assembly 9/38/40 for Mini XL650 Case Feeder

    An additional 6-tube Magazine Assembly for your Mini XL650 Case Feeder.

    It will hold about 150 pcs of 9mm brass, 130 pcs of .40 and about 120 pcs of .38S.

    Tip:

    When filling the tubes, rotate the base of the assembly so that it is positioned between tubes- that way none of the columns line up with the hole in the bottom – and the brass won’t fall out prematurely.

    from44.95 EUR
    View details
  • Dillon XL 650 without case feeder
    Dillon XL 650 without case feeder

    The Dillon XL650 is a high-speed progressive reloading machine designed to load the common rifle and handgun cartridges, from 17 Hornet though 458 Winchester Magnum in rifle, and 32 ACP through 500 S&W in handgun.

    Truly the state of the art, our XL650 features automatic indexing and is capable of producing up to 800 rounds per hour, or more if you are using both the case and bullet feeders. With our quick change caliber conversion kits you can swap the machine from one caliber to the next in less than 10 minutes. The XL650 is available in most popular pistol and rifle calibers.

    The optional Casefeeder ( https://cesar-shop.com/buy/202 ) from Dillon Precision will speed up reloading. You can dump clean brass in the Casefeeder and let him do the orientation and distribution of the empty cases instead of doing this by hand. Each Casefeeder ships with one of four Casefeed plates.

    from699.00 EUR
    View details
  • Dillon 650 Case Feeder, 220v
    Dillon 650 Case Feeder, 220v

    Electric Case Feed System allows you to simply dump fired, cleaned and deprimed hulls into the bowl.  The Case Feeder orients the hulls right side up and fills the feed tube automatically, turning itself on and off as necessary, to keep the case feed tube full.

    The Casefeeder will hold 600 .38 Special cases or 500 .223 Rem cases. 

    Be aware this casefeeder is without the Case feeder plate that is appropriate for the type of ammunition you wish to reload. See here the Case feeder plate you need. 

    from230.00 EUR
    View details
  • Case gauge 9x19 and 40S&W in one
    Case gauge 9x19 and 40S&W in one

    Pocket Case Gauge for 9x19 and 40S&W

    This Pocket case gauge is intended to be used anywhere to ensure absolute correct dimensions .

    Serious competitors are aware of the importance of drop-testing one's bullets before a match. Since most malfunctions are ammo related, and most of those relate to deformed, bulging or otherwise defective brass - dropping the bullets into a gauge is an effective way to reduce the chance of a costly malfunction. This handy keyring gauge is always with you and will never get lost.

    And when you have cases stuck in the gauge you can take them out without tools because the Gauge is shorter than the ammunition you test.

    CNC machined from top quality aluminium, red or blue anodized.

    from19.90 EUR
    View details
  • Index Bearing Cam Block for Dillon XL650
    Index Bearing Cam Block for Dillon XL650

    Index Cam Bearing Block. Compatible with the current model Dillon Precision XL-650 progressive reloading press. This is a premium upgrade that smooths the action for the index cam and removes the need for grease on the index pawl. It replaces the steel block that causes friction and drag. Included is one aluminum bearing block with a sealed ball bearing.

    Made from aircraft grade aluminum. Anodized in Blue color. Made with CNC precision with pride in Europe.

    from19.90 EUR
    View details
  • Mini XL650 Case Feeder 9/38
    Mini XL650 Case Feeder 9/38

    Many customers choose to start reloading on their XL650 without the optional case feeder, and for them the new DAA Mini Case feeder will be a great addition to their press!

    In a few short minutes, perhaps while watching your favorite You Tube Channel, you can pre-hand-load the 6 tubes of the magazine assembly which will hold a combined 150 pcs of 9mm brass (about 130 of .40, or 120 of 38S).

    Using the included custom adaptor piece, you simply seat the Magazine atop your XL650, click the first tube into place – and you are ready to go. Each time a tube empties out, click the next one into position and continue reloading.

    Additional Magazine Assemblies may be purchased separately should you wish to prepare more than 150 pcs of brass before starting to reload.

    - The magazine assemblies are not caliber specific, and can be used for 9, 38 or .40 brass. We do not have a solution for .45 at this time.

    - The adaptor part IS caliber specific, with one being suitable for 9/.38 and another being for 0.40.

    - When filling the tubes, rotate the base of the assembly so that it is positioned between tubes- that way none of the columns line up with the hole in the bottom – and the brass won’t fall out prematurely.

    - You can use the 9/.38 kit for 38SPL or .357 however you will need to modify slightly the bottom of the adaptor - shorten the stem.


    from54.95 EUR
    View details
  • 650 BILLET TOOLHEAD
    650 BILLET TOOLHEAD

    These lighter weight Aluminum toolheads are machined from billet using the same precise CNC machining as our standard toolheads. Available in four different colors to allow you to quickly differentiate between calibers or load types.

    from39.00 EUR
    View details
  • LED Lighting system for Dillon 650
    LED Lighting system for Dillon 650

    The Skylight kit for the Dillon 650 has a machined bushing with an embedded high output LED pod that installs into the center hole of the toolhead,  additionally, the system also has a 4" 6 LED strip that attaches to the inside of the press frame.   Super bright, , out of the way, no heat and does the job perfectly.  Average lifespan is 75,000 hours, that is about eight and a half year, but you have to reload 24 hours, seven days a week, all that time.

    Caliber changes are quick and easy, just pop it out, swap your toolhead, pop it back in and get to back work. The system comes complete with a 220/110 plug in adaptor, onoff switch, wire routing anchors and zip ties. As with all Inline Fabrication lighting systems, these have lifetime "No worries" warranty.

    from42.00 EUR
    View details
  • Dillon XL 650 Machine cover
    Dillon XL 650 Machine cover

    This packcloth nylon machine cover comes equipped with a D-ring, allowing the heavy-duty zipper to be locked.Covers XL650 with or without the case feeder attached. Additionally, use this cover for the RL550 when equipped with the optional handgun caliber case feeder. 

    If you have an XL650 equipped with a Mr. Bulletfeeder, use the 1050 cover. 

    from44.00 EUR
    View details
  • Dillon XL 650-RL550 Wrenches
    Dillon XL 650-RL550 Wrenches

    This unit includes the complete allen wrench set plus the one inch bench wrench.

    from35.00 EUR
    View details
  • 550/650 TOOLHEAD STAND
    550/650 TOOLHEAD STAND

    The ultimate in convenience for keeping your reloading bench clean and uncluttered. You will find in an instant what you need to make the switch from one to another caliber.  

    This stand is for the RL550 Series and XL650 machines only.

    from26.00 EUR
    View details
  • Dillon Aluminum Roller Handle 550 / 650
    Dillon Aluminum Roller Handle 550 / 650

    Dillon's accessory handle gives your reloader an entirely new "feel." 
    A roller handle reduces operator fatigue during long reloading sessions and makes primer seating easier. Fits the RL550 and XL650 loaders. 

    from53.00 EUR
    View details
  • Dillon XL 650 Conversion kit
    Dillon XL 650 Conversion kit

    Dillon XL650 Caliber Conversions are available for common rifle and handgun cartridges, from 17 Hornet though 458 Winchester Magnum in rifle, and 32 ACP through 500 S&W in handgun.

    Includes:

    • Shellplate
    • Locator buttons
    • Powder funnel
    • Casefeed adapter parts

    We suggest that you also get:

    Dillon dies, which are designed for high speed use.

    If you want to leave your dies preset, you'll need: 

    • Toolhead(#13863)
    • Powder die(#20064) 
    • OR The 650 Quick Change(#22059), which includes a powder measure, powder die, toolhead and a toolhead stand. This allows you to leave your dies and powder charge set up and dedicated to a specific cartridge for faster, easier caliber changes.

    Available in most calibers.  Some exotic combinations need extra parts like shown in the table on this link.

    Extra Large Powder Die #21253 and Magnum Rifle Casefeed Kit #11069, sold separately.

    from88.00 EUR
    View details
  • Dillon XL 650 spare parts
    Dillon XL 650 spare parts

    To keep your machine running also when you had a little accident.

    Spare parts kit specifically for your XL650 machine.

    Don't risk downtime waiting for a replacement parts!

    from31.00 EUR
    View details
  • Dillon 650/550 Machine Strong Mount
    Dillon 650/550 Machine Strong Mount

    This mount is for both the RL 550 series presses as well as the XL650.  Mount height = 8 1/2"  or 21,6 centimeters.

    Raises your press above the work bench level and adds stability due to its larger footprint.

    Recommended by lots of reloaders.

    from56.00 EUR
    View details
  • Dillon Plastic Roller Handle
    Dillon Plastic Roller Handle

    Dillon's accessory handle gives your reloader an entirely new "feel." 
    A roller handle reduces operator fatigue during long reloading sessions and makes primer seating easier. Fits the RL550 and XL650 loaders. 

    from50.00 EUR
    View details
  • Dillon 650/1050 Powder Check system
    Dillon 650/1050 Powder Check system

    Comes with powder check die and 3 check rods which are from .22 till .45 Cal. Battery AAA is included.

    This item does not check the accuracy of the powder charge, it checks for double-charges or no-charges only.

    from78.00 EUR
    View details
  • Dillon XL 650 Maintenance and spare parts
    Dillon XL 650 Maintenance and spare parts

    To keep your machine running also when you had a little accident.

    Spare parts kit specifically for your XL650 machine.

    Don't risk downtime waiting for a replacement parts!

    Everything you need to keep your Dillon loader cleaned and lubricated up to factory specifications. Includes the spare parts kit for your machine.

    Note : The aerosol inside makes it impossible to ship this by air.

    from47.00 EUR
    View details

Contact Us