Select your country here
Please select your country
Корзина пуста
По этим критериям поиска ничего не найдено
CALIBRE : 223
LENGHT : 18” (Cal.223)
TWIST RATE : 1/9 (Cal.223)
UPPER: CNC Machined from our design billet – AL 7075T6 in H170 Titanium Cerakote
MIL SPEC compatibility and M4 Feed ramps Without forward assist
Charging Handle with Tactical Latch Oversize Ambi
LOWER: CNC Machined from our design billet – AL 7075T6in H170 Titanium Cerakote
MIL SPEC compatibility
Enhanced flared/magwell magazine
Integral trigger guard, great for gloves use
Ambi selector
Mag. release oversize
Ambi bolt catch Anti rotation trigger pin
Made stronger than other similar commercially
BARREL: Hammer forged nitrited – Heavy profile – thread: 1/2 X 28 with compensator.
GAS SYSTEM: Direct gas impingement with gas block low profile.
BOLT CARRIER GROUP: Stainless Steel with QPQ treatment antifriction – black.
HANDGUARD: Octagonal free float slim with four frontal picatinny – original design – CNC machined – M-LOK System – full size barrel.
TRIGGER: U.L.T.R.A. adjustable – 2,5Lb
STOCK: Tube MIL SPEC collapsible.
Info: Left Charging System, reciprocating steel charging handle, attached to a modified carrier and upper receiver. Facilitates the Charging operation without leaving the line of sight, designed for use both competitive and tactical. Made after careful ergonomic studies and extensive field trials.
3GUN
with M-LOK HANDGUARD in H152 Stainless Cerakote
LENGHT : 18” – 20”
TWIST RATE : 1/9
UPPER: Forged and machined from our design billet – AL7075T6
Hard black anodized
MIL-SPEC and M4 Feed ramps
Charging handle with tactical latch Ambi Oversize
Made stronger than other similar commercial rifles
LOWER: Forged and machined from our design billet – AL7075T6
Enhanced flared/Magwell magazine
Integral trigger guard
Mag. release OVS
Bolt catch OVS
Selector Ambi 45°
BARREL: Lothar Walther – 3GUN profile – thread: 1/2×28 with Sport compensator
GAS SYSTEM: Direct gas impingement with gas block low profile adjustable
BOLT CARRIER GROUP: Stainless Stell – Lightweight with QPQ Treatment Antifriction – Black
HANDGUARD: CNC machined, free floated Ventilated, M-LOK H152 Stainless Cerakote
Possibility to regulate the gas block from outside without remove the handguard
TRIGGER: MIL SPEC with lightweight springs
STOCK: Fixed competition
Kit A2 – Buffer and spring or Tube, Buffer and Spring
Buffer weight: 148g
Picatinny rail for ADC handguards
Weight: 4''-24g, 8''-48g
Springs for A2 Stock regular and light strength
The ADC lightweight spring for AR15/A2 fixed stock. Ideal for lightweighed carriers.
Ideal for sporting use, this has been made lighter than the standard A2 and it is therefore compatible with our lightweight carriers and spring A2.
It can be used only with fixed stocks.
Weight: 85 g
A recoil reducer designed to eliminate vibration and annoying noise that characterizes the operation of AR platforms.
The package includes the spring system and thickness body for potential use of fixed calcium.
Bolt catch oversized both internally and externally. Visible prolonged internal flap that allows adaptability with all magazines. The knurled outer surface is great for improving its grip.
It is made of high quality steel and subjected to heat treatments to make the contact surfaces resistant and unaltered over time.
Our carrier “Light competition” has been designed to be as light as possible, weighing only 182 gr with gas key assembled; it is ideal for sport activities, combined with ADC Adjustable Gas Block it allows the carbine to have a good yield.
Completely made of stainless steel, it is finished with anti-friction treatments that increase the fluidity in operation.
Even the aesthetics have not been neglected, the side and front grooves give a sinuous shape and sense of lightness.
Safety sel. ambi 90°-45°
Safety selector ambi that offers the option of being installed at 90 degrees or 45 degrees.
It has a central screw that allows safe adjustment, making it perfectly operational both assembled on the trigger kit ULTRA and on all other trigger group on the market.
The package includes a short external lever and a reversible standard one that allow ambidextrous use.
The aesthetic peculiarity is the shape of the ace of spades, the ADC brand.
The Elite handguard is 100% made in Italy, CNC machined, it was designed primarily to maximize the particular design that features the ADC carbines, allowing compatibility with other AR platforms.
It is characterized by an octagonal profile, free-float, with four frontal picatinny.
It is distinguished by other models for futuristic design and for the upper interrupted picatinny.
It is important to emphasize the use of the modern M-LOK system.
Material: 6082 aluminum, hard black anodizing
Available lengths: 9” – 12” – 14” – 15,5”
Weight (without barrel nut): 224 gr – 248 gr – 272 gr – 288 gr
Width: 41mm
Inside Diameter: 35mm
The Competition handguard is 100% made in Italy, CNC machined, it was designed specifically for sports activities; for this purpose it has been heavily lightened by making millings which optimize its grip and allow the regulation of our gas block ADJ. from the outside.
Round, free-float profile, it has double barrel nut, both inside and outside.
The holes positioned throughout its length allow mounting from outside the picatinny sections every 22.5 °.
Available lengths: 15,5”
Weight (without barrel nut): 208 gr
Width: 50 mm
The Competition handguard is 100% made in Italy, CNC machined, it was designed specifically for sports activities; for this purpose it has been heavily lightened by making millings which optimize its grip and allow the regulation of our gas block ADJ, from the outside.
M-Lok, Free-float profile, it has double barrel nut, both inside and outside.
The holes positioned throughout its length allow mounting from outside the picatinny sections
Available lengths: 15”
Weight (without barrel nut): 240 gr
Spectrum
Compensator ideal for tactical use, whose maximum yield is with short barrel carbines.
The side windows, specially tapered to dampen the recoil and at the same time break the flame. The upper holes, on the other hand, give the weapon stability and neutrality, minimizing the nose-up and reducing the twist. Lastly, the four frontal tips allow this compensator to be used as a means of breaking.
It is made of high quality steel and subjected to high-hardness heat treatments with the double end to make the non-stick surface to the gunpowder residues on one side and robust on the other.
Thread 1/2×28
Ideal for sports activities, it is advisable to use it on long barrel carbines, both for close-range and long-distance shooting.
This compensator and recoil reducer, with unusual and futuristic design, is designed to provide finest sports performance with steel case ammunition.
It is made of high quality steel and subjected to heat treatments in order to make the non-stick surface to gunpowder residues.
The square side windows have been specially designed to dampen the recoil, the holes give stability and neutrality to the weapon, minimizing the nose-up. Lastly, the four front propellers, staggered by each other, allow the contrast of the grooves of the barrel, decreasing the twist.
Compensator specially designed for sports activities, it is ideal for long barrel carbines.
Its side windows give stability and neutrality to the weapon, minimizing the nose-up and getting back on target cracking followup shots as fast as possible.
The special radial holes located at the base of each window have been specially designed to dampen the recoil.
Functional for both close and long range shooting.
The elongated shape combined with the windows gives a distinguishable and refined image.