Select your country here
Please select your country
Warenkorb ist leer
Keine Artikel gefunden, die mit den Suchkriterien übereinstimmen
M5 PLUS BLACK
CALIBRE : 223Rem
BARREL LENGHT : 14,5”
TWIST RATE : 1/9”
UPPER : Machined from MIL SPEC forged- AL7075T6 Hard black anodized M4 Feed ramps,
LOWER : Machined from MIL SPEC forged- AL7075T6 Hard black anodized
BARREL : Hammer Forged Nitrited – Heavy profile – thread : 1/2 X 28 with A2 flash hider.
GAS SYSTEM : Direct gas impingement with gas block low profile
BOLT CARRIER GROUP: Prismatic heavy phosphate
HANDGUARD: Octagonal free float slim with full size picatinny – CNC machined – M-LOK System – 12”
TRIGGER: MIL SPEC
STOCK : MIL SPEC collapsible
BARREL LENGHT : 16”
Compensator specially designed for sports activities, it is ideal for long barrel carbines.
Its side windows give stability and neutrality to the weapon, minimizing the nose-up and getting back on target cracking followup shots as fast as possible.
The special radial holes located at the base of each window have been specially designed to dampen the recoil.
Functional for both close and long range shooting.
The elongated shape combined with the windows gives a distinguishable and refined image.
It is made of high quality steel and subjected to heat treatments in order to make the non-stick surface to gunpowder residues.
Thread 1/2×28
Compensator ideal for tactical use, whose maximum yield is with short barrel carbines.
The square side windows have been specially designed to dampen the recoil, the holes give stability and neutrality to the weapon, minimizing the nose-up. Lastly, the four front propellers, staggered by each other, allow the contrast of the grooves of the barrel, decreasing the twist.
This compensator and recoil reducer, with unusual and futuristic design, is designed to provide finest sports performance with steel case ammunition.
Ideal for sports activities, it is advisable to use it on long barrel carbines, both for close-range and long-distance shooting.
Spectrum
The side windows, specially tapered to dampen the recoil and at the same time break the flame. The upper holes, on the other hand, give the weapon stability and neutrality, minimizing the nose-up and reducing the twist. Lastly, the four frontal tips allow this compensator to be used as a means of breaking.
It is made of high quality steel and subjected to high-hardness heat treatments with the double end to make the non-stick surface to the gunpowder residues on one side and robust on the other.
The Competition handguard is 100% made in Italy, CNC machined, it was designed specifically for sports activities; for this purpose it has been heavily lightened by making millings which optimize its grip and allow the regulation of our gas block ADJ, from the outside.
M-Lok, Free-float profile, it has double barrel nut, both inside and outside.
The holes positioned throughout its length allow mounting from outside the picatinny sections
Material: 6082 aluminum, hard black anodizing
Available lengths: 15”
Weight (without barrel nut): 240 gr
The Competition handguard is 100% made in Italy, CNC machined, it was designed specifically for sports activities; for this purpose it has been heavily lightened by making millings which optimize its grip and allow the regulation of our gas block ADJ. from the outside.
Round, free-float profile, it has double barrel nut, both inside and outside.
The holes positioned throughout its length allow mounting from outside the picatinny sections every 22.5 °.
Available lengths: 15,5”
Weight (without barrel nut): 208 gr
Width: 50 mm
Inside Diameter: 35mm
The Elite handguard is 100% made in Italy, CNC machined, it was designed primarily to maximize the particular design that features the ADC carbines, allowing compatibility with other AR platforms.
It is characterized by an octagonal profile, free-float, with four frontal picatinny.
It is distinguished by other models for futuristic design and for the upper interrupted picatinny.
It is important to emphasize the use of the modern M-LOK system.
Available lengths: 9” – 12” – 14” – 15,5”
Weight (without barrel nut): 224 gr – 248 gr – 272 gr – 288 gr
Width: 41mm
Safety sel. ambi 90°-45°
Safety selector ambi that offers the option of being installed at 90 degrees or 45 degrees.
It has a central screw that allows safe adjustment, making it perfectly operational both assembled on the trigger kit ULTRA and on all other trigger group on the market.
The package includes a short external lever and a reversible standard one that allow ambidextrous use.
The aesthetic peculiarity is the shape of the ace of spades, the ADC brand.
Our carrier “Light competition” has been designed to be as light as possible, weighing only 182 gr with gas key assembled; it is ideal for sport activities, combined with ADC Adjustable Gas Block it allows the carbine to have a good yield.
Completely made of stainless steel, it is finished with anti-friction treatments that increase the fluidity in operation.
Even the aesthetics have not been neglected, the side and front grooves give a sinuous shape and sense of lightness.
Bolt catch oversized both internally and externally. Visible prolonged internal flap that allows adaptability with all magazines. The knurled outer surface is great for improving its grip.
It is made of high quality steel and subjected to heat treatments to make the contact surfaces resistant and unaltered over time.
A recoil reducer designed to eliminate vibration and annoying noise that characterizes the operation of AR platforms.
The package includes the spring system and thickness body for potential use of fixed calcium.
Ideal for sporting use, this has been made lighter than the standard A2 and it is therefore compatible with our lightweight carriers and spring A2.
It can be used only with fixed stocks.
Weight: 85 g
The ADC lightweight spring for AR15/A2 fixed stock. Ideal for lightweighed carriers.
Springs for A2 Stock regular and light strength
