This base pad Race for CZ gives you the best grip and durability.
Designed with advanced sports and professional competition shooters.
They are legal for IPSC production division and standard division (fits IPSC box).

New design Glock base pad. New features is a tight grip and deep side grooves that makes sure your handling is swift and precise, it adds the extra needed support for one-handed manipulation. Magazine base pad fits into the original Glock magazine notches.

Magazine pad is precisely-engineered in our factory and features easy disassembly and assembly without any tools required. Finger grip will make sure that you will get the best out of the product even when using both hands.

Base pads will add additional 2 rounds to your Glock magazine.

They come in 5 colors – Black, Red, Blue, Gold and Silver.

Made in Europe from a solid piece of finest aircraft grade aluminium.

Magazine Base Pad MaXXXGrip 

NOT FOR MAGWELL USE

Fits in standard box for IPSC Matches.

Comes complete with the specially designed plate for easier assamble and disassembling the magazine.

Gauge with flip tray for gauging ammo on size and primer seating with 100 at once and with the help of the flip tray you can put them directly in your MTM 100 cases or Dillon Precision ammo boxes. 

If you are serious about shooting, you are probably a reloader. So you are serious about gauging your ammo too. This tool will save you a lot of time, it will gauge 100 cartriges of 9mm Luger (9x19 parabellum) at once and with a twist and a flip you have all your ammunition nice and neat in boxes, ready for the range or storage.

Precision machined from Aluminium, black anodized.

Now also for our friends of the 9x21 IMI caliber.

Gauge with flip tray for gauging ammo on size and primer seating with 100 at once and with the help of the flip tray you can put them directly in your MTM 100 cases or Dillon Precision ammo boxes. 

If you are serious about shooting, you are probably a reloader. So you are serious about gauging your ammo too. This tool will save you a lot of time, it will gauge 100 cartriges of 9mm Luger (9x19 parabellum) at once and with a twist and a flip you have all your ammunition nice and neat in boxes, ready for the range or storage.

Precision machined from Aluminium, black anodized.

Now also for our friends of the 9x21 IMI caliber.

Easy to setup Drop-in spacer for Dillon case feeder

This spacer for Dillon case feeder allows you quickly rise your case feeder plate without clutch system disassembly. Just put it on casefeeder and insert plate above spacer. You will get 1/4 inch rise (6,35mm). This can be used for longer pistol cases that turn over. Or short rifle cases such .300 AAC Blackout with Large pistol plate.

Rolling Handle for XL650 and RL550

Ball bearing rolling handle for effortless reloading.

Included thread lock. 

Weights in a 270 grams so you know heavy duty made to last a lifetime and thereafter.

Index Cam Bearing Block. Compatible with the current model Dillon Precision XL-650 progressive reloading press. This is a premium upgrade that smooths the action for the index cam and removes the need for grease on the index pawl. It replaces the steel block that causes friction and drag. Included is one aluminum bearing block with a sealed ball bearing.

Made from aircraft grade aluminum. Anodized in Blue color. Made with CNC precision with pride in Europe.

Primer chute for spent primers replaces the blue plastic spent primer cup and bracket on the Dillon 650 reloading press. It completely covers the spent primer ejection port, creating a fully enclosed pathway for spent primers. Spent primers are routed through clear PVC tubing into plastic bottle which you fix with a holder on a strong mount. No more spent primers on floor.

Primer chute fits your dillon XL650. It is fastend with two bolts (existing). Instalation time about 1-2 minutes. Made form Aluminium. Transparent tube included. Also works great with large primers.

Included:

• Aluminum chute
• Transparent tube
• Holder for Strong Mounts
• Plastic Bottle

You may also like Armanov Strong Mounts.

Powder Baffle is a must have reloading accessory that dramatically increases powder load consistency and accuracy! 

When reloading your own ammunition it is common to produce 500 to 1,000 rounds per hour. At this rate your powder reservoir empties pretty fast. The weight of powder in the tube affects how full of a charge your bullets receive. A baffle ensures consistent weight on the powder at the bottom of the reservoir, giving you consistent loads.

This design eliminates direct weight from the powder in the powder tube reservoir to the charge bar allowing the most consistent and accurate flows. Whether the powder reservoir tube is full, half way or almost empty your averageload should be consistent. 

Powder Baffle is made from stainless steel.

Fits on Dillon Auto Powder Measure . It only takes a few seconds to drop it down into the bottom of the Dillon powder hopper. The powder hopper is not modified and your Dillon Warranty will not be effected.

Powder measure knob for the Dillon Powder thrower with click for easy adjustment.

Unlike other competitors, this knob is laser etched with 50 graduations giving the user reference points when adjusting. Two steel spring loaded balls generate smooth and repetable clicks. Easy to setup between multiple loads or even calibres, very precise 50 clicks per turn. Testing on pistol powders one click increments is about 0.015 grains. This is a very precise setting. 

Simple installment and a tremendous help for if you are using different loads with visual scale.

The Dillon Factory screw requires a wrench when adjusting the amount of powder to dispense in your powder thrower. This knob is labeled with graduations for orientation and easily allows the user to hand adjust the powder dispenser without the need for tools. Works on Dillon 1050, 650,550, SDB and 900 presses.

Both parts are made from aircraft grade aluminum - anodized black color

1 x laser etched knob assembly consisting of one knob frame and one adjusting knob

1 x allen wrench for the grub-screws to fasten

Dillon Powder Bar shown only for reference and is NOT included.

Stop switch enables you to lock the case feed shuttle back to prevent cases from feeding into the shell plate when cycling the press. Easy installation. Just screw with two original bolts. Built in hinge made for super easy usage, cycle machine to down position and enable stop switch. Built in bulge that locks switch in case ON position.  Great for clearing the shell plate, maintenance, setup, or any time you don’t want cases to feed.  Made from high quality steel. This product is suitable for Dillon 1050 only.

Some people mark brass to keep up with how many times it has been fired and some people mark their brass so they can later identify brass ownership. We designed Brass Stencils that are specially designed for marking ammo. This stencil is fully compatible with our 100 rnd case gauge. Each stencil set comes with 1 colour marker. You can use any permanent marker that only leaves thin layer if color and does not leave any coat of lacquer that may reduce firearm reliability. Brass Stencils are made from stainless steel and are quick to assemble and easy to apply, the solvent resistant plates can be used again and again.

Armanov Magazine Base Pad for CZ 75, Shadow2, SP01 MaxxxGrip style is a revolution for magazine pads.

Armanov Magazine Base Pad for CZ 75, Shadow2, SP01 MaxxxGrip +2Rnd has extremly high gripping force so handling is much more secure and precise. Bottom of magazine pad is covered with special anti-slip material and sides are serrated for maximum grip. This is very important in dynamic sport shooting where you have to change your magazine fast and precise.

Base pad also adds two rounds to increase the magazine  capacity from 17 to 19. Legal for IPSC production division. Compatible with all CZ 75 17rnd capacity magazines. CZ Shaodow2 for CZ and Mec-Gar Magazines.

Primer cam Index Stop Switch for Dillon Precision XL-650 and SL-900 Progressive Reloading Press. The switch moves to turn ON and OFF the index by bypassing the indexing lever on the primer feed assembly. Integrated spring ball works as clickable position capture. Use the factory screw to install. Material for the base is 6082 aluminium and material for the ramp is Delrin (POM-C). Spare ramps can be ordered separately. Super simple install. Just unscrew original primer cam and use same bolt to attach this stop switch.