Cover your Armanov Ammo Checker with Quick Loader and fill it up with the rounds. Shake it in a circular motion until most of the rounds fall in the Ammo Checker, then remove the remaining rounds. You can also help it a bit by mixing it with your fingers. We recommend to fill it with more than 100 rounds for better functionality.

Designed for the whole conversion kit: Casefeed Body Bushing, Shell Plate, Casefeed Adapter, Station Locator, Powder Funnel and Locator buttons.

Cover your Armanov Ammo Checker with Quick Loader and fill it up with the rounds. Shake it in a circular motion until most of the rounds fall in the Ammo Checker, then remove the remaining rounds. You can also help it a bit by mixing it with your fingers. We recommend to fill it with more than 100 rounds for better functionality.

Since most malfunctions are ammo related, and most of those relate to deformed, bulging or otherwise defective brass - dropping the ammo into a gauge is an effective way to reduce the chance of a costly malfunction. With our spring-loaded mechanism, you can quickly transfer 10 rounds at a time to your ammo box thanks to cutouts in the sheet metal plate that hold your ammunition by the case extractor grooves. 

Improvs magazine handling speed and precision of your Sig P226, X5 or LDC pistol. IS MAGWELL COMPATTIBLE! It also adds +2 rounds to increase the magazine capacity from 17 to 19 using the stock magazine springs, but the superb handling and grip is what truly makes this base pad a worthwhile upgrade. 

Live Primer Catcher is practical solution to a problem every XL650 press user is familiar with: live primers being ejected out of the press and falling to the floor. The original ramp on the press does not do a great job catching those live primers as they are ejected. And even if they stay on the ramp, retrieving them without dropping some can be challenging.

Sig MPX Magazine Base Pad increases original magazines capacity by 5 extra rounds. Made from super durable solid Nylon, it adds gripping surface and more solid grip. Installed in seconds and without use of tools.

Primer chute for spent primers replaces the blue plastic spent primer cup and bracket on the Dillon XL650, 750 and Super 1050/1100 reloading press. It completely covers the spent primer ejection port, creating a fully enclosed pathway for spent primers. Spent primers are routed through clear PVC tubing into any convenient waste container.

Install by slipping this on the top back side of your case feeder and fits to the Dillon Case feeder 550 / 650 / 750 / 1050 / 1100 or Hornady LNL AP Bullet / Case feeder support tubes.

This Magazine Pad for Sig Sauer drastically improves the gripping action of your pouched magazines thanks to deep side grooves and added surface area.

Powder Funnel for activating the Dillon automatic powder system. An essential component for reloading 9 mm family of calibers with any bullet-feeder system with your Dillon powder measure. It prepares the brass correctly so that the bullet can be seated in the case, and not tip over as you index the shell plate.

If primer does not explode when hit by firing pin then most common reason is that primer is not seated deep enough. This problem is quite common in new XL750 since orginal primer punch spring is a little to long and primers are not seated deep enough. Armanov solution to this problem is new Index Cam Block with integrated ball bearing and adjustable primer seating depth stop.

Armanov Stackable Case Gauge for .223 REM or 5,56 x 45 mm or .300 AAC Blackout ammo, made to tight tolerances SAAMI specification. Machined from top quality aluminum with high tolerances so you can sort out any faulty round instantly. It’s smartly designed to double also as OAL checker when you lay it on flat surface. Since most malfunctions are ammo related, and most of those relate to deformed, bulging or otherwise defective brass – dropping the bullets into a gauge is an effective way to save time, trouble and reduce the chance of costly malfunction. Price is for 1 piece (10 rounds).

Primer Stop Block for Dillon Precision XL750 Progressive Reloading Press. Comes very useful for operations when no primer insertion is required. The block prevents movement of the primer slide bar. Super simple installation by simply inserting the block between the pin on the slide and primer feed body. When not in use attach it to the steel primer tube by the magnet

Bushings are made for a quick, simple and precise change of dies in the toolhead. No need for a complete toolhead change anymore, just twist and replace any bushing with the die of your choice. Change six dies on a Dillon Super 1050 / RL 1100 in seconds!

This toolhead is required for use with RT1500 Electric Case Trimmer. This combination is commonly used to trim 300 AAC Blackout on the XL650 & XL750.

Completely new design adds +5 rounds of capacity, featuring rough and rounded bottom, covered with Spider texture for solid position when shooting from floor or over an obstacle while using magazine as monopod support.

This toolhead for Dillon Super 1050/RL1100 is a real game-changer. It is a drop-in upgrade for the original toolhead with great new features.

Troubleshooting malfunctions with handguns can sometimes be difficult. With our dedicated recoil spring tester you can easily eliminate a potential source of problems with your handgun. Its simplistic design and ease of use makes testing the strength of your recoil springs quick and effective.

This Base Pad for Sig Sauer P320 or P250 does this best; improve magazine handling speed and precision of your Sig pistol. It also adds +2 rounds to increase the magazine capacity using the stock magazine springs, but the superb handling and grip is what truly makes this base pad a worthwhile upgrade.

Freshly designed Armanov SpidErgo Tanfoglio SF Grips are top of the line contoured SpidErgo Grips for your Tanfoglio competition pistol made out of finest, most durable, aircraft grade aluminium. Special precision-machined texture, designed to keep your hand tight in place, it will make sure you get the most out of your competition performance.

Armanov Mirror for Dillon Case Feeder is a simple solution for keeping control of quantity of cases inside case feeder.

Armanov Ball Bearing Alu Roller Handle gives you an entirely new “feel.” A roller handle reduces operator fatigue during long reloading sessions and makes primer seating easier. Angled model fits the Hornady reloading press machine.

Tired of emptying your spent primer cup or knocking it over spilling spent primers everywhere?

Install Armanov Spent Primer Chute and forget about It. Zero mods to reloading press required, it re-uses the original screw to install and installs in place of stock spent primer cup bracket.

This is a Debris Catcher for Casefeeder. The Dillon Casefeeder has two holes in the bottom back of the bowl assembly. These holes allow any accumulated spent powder, polishing media or general crud to drain out of the bowl. This debris if left unchecked can fall all over your press or bench top.

Here's a cool upgrade for current Armanov Case Cauge, an overall Round Lenght checker! It fits perfectly to the new model of the Armanov Case Gauge - the one with an edge on the bottom side.

This toolhead has lock rings that allow the sizer and seater dies to float. This floating action allows the dies to center themselves exactly over each cartridge for the best possible alignment and more concentric ammunition.

Armanov Magazine Limiter is a simple and cheap solution for IPSC shooters. Never get your count wrong again. Works with all Mec-Gar double stack magazines with +2 rounds magazine base pads.

Armanov Aluminium +1 Base Pads for AR Style Shotguns like MKA1919, Derya, Kral Arms, Adler B230 and similar. This base pad is durable and it holds 1 extra round. It’s CNC machined from billet aluminium.

Freshly designed from the ground up, top of the line Armanov Contoured SpidErgo Grips for full-size 1911 competition pistols made out of finest, most durable, aircraft grade aluminium. Special precision-machined texture, designed to keep your hand tight in place, it will make sure you get the most out of your competition performance. These SpidErgo grips are what you need to prevent any unwanted movement or sliding of your hand. 

Armanov Equalizer Compensator / muzzle brake was designed from the ground up by studying gas flow of the low pressure 9 mm pistol caliber. Three chambers are designed to catch as much gasses as possible and divert them upwards and at the same time reduce felt recoil. The result are faster follow-up shots in smaller groups and less overall movement of the firearm.

Armanov RACE Magazine Base pad for CZ gives you the best grip and durability. Designed with advanced sports and professional competition shooters. They are legal for IPSC production division and standard division (fits IPSC box) and IDPA. Precise cuts and grooves are machined across 3 sides to ensure you the fastest and the most precise reloads with one hand. The grip is really hard and will stay in place with a tight fit. Base pads also add one round to increase the magazine capacity from 17 to 18 and works perfectly with the standard stock magazine springs.

These baseplates WILL work with original CZ magwells 

Freshly made base pad for Glock features a tight grip and deep side grooves which make sure your handling is swift and precise. It adds the extra needed surface area for one-handed manipulation. Magazine base pad fits into the original Glock magazine notches.

Magazine Base Pad MaXXXGrip 

NOT FOR MAGWELL USE

If you are serious about shooting, you are probably a reloader. So you are serious about gauging your ammo too. Armanov 100 pcs Ammo Gauge for gauging ammo tolerances and primer seating 100 at a time. Flip tray is also included, for easy ammo transfer from Case Gauge to MTM/Dillon style 100 pcs ammo box. 

If you are serious about shooting, you are probably a reloader. So you are serious about gauging your ammo too. Armanov 100 pcs Ammo Gauge for gauging ammo tolerances and primer seating 100 at a time. Flip tray is also included, for easy ammo transfer from Case Gauge to MTM/Dillon style 100 pcs ammo box. 

This spacer for Dillon case feeder allows you quickly rise your case feeder plate without clutch system disassembly.

Rolling Handle for XL650/750 and RL550.

Free Float Lock Ring for Dillon Toolhead allow the sizer and seater dies to float. This floating action allows the dies to center themselves exactly over each cartridge for the best possible alignment and more concentric ammunition. This free float lock ring will only fit with free float toolheads for Dillon XL650 / XL750 or RL550..

Primer chute for spent primers replaces the blue plastic spent primer cup and bracket on the Dillon XL650/750 reloading press. It completely covers the spent primer ejection port, creating a fully enclosed pathway for spent primers. Spent primers are routed through clear PVC tubing into plastic bottle which you fix with a holder on a strong mount. No more spent primers on floor.

Powder Baffle for Dillon is a must have reloading accessory that dramatically increases powder load consistency and accuracy! 

Armanov Quick Disconnect replaces original Dillon Powder Measure half-ring retention.

Powder measure knob for the Dillon Powder thrower with click for easy adjustment. Unlike other competitors, this knob is laser etched with 50 graduations giving the user reference points when adjusting. Two steel spring loaded balls generate smooth and repetable clicks. Easy to setup between multiple loads or even calibres, very precise 50 clicks per turn. 

Stop switch enables you to lock the case feed shuttle back to prevent cases from feeding into the shell plate when cycling the press. Easy installation. Just screw with two original bolts. Built in hinge made for super easy usage, cycle machine to down position and enable stop switch. Built in bulge that locks switch in case ON position.  Great for clearing the shell plate, maintenance, setup, or any time you don’t want cases to feed.  Made from high quality steel. This product is suitable for Dillon 1050 only.

Metal Stencil for Marking Ammo:

Primer cam Index Stop Switch for Dillon Precision XL650 and SL900 Progressive Reloading Press. The switch moves to turn ON and OFF the index by bypassing the indexing lever on the primer feed assembly.