Shipping calculator

Sale

All products on Sale

Information

Contact Us

DAA

  • DAA Magnet with M5 screw for Alpha-X Pouch
    DAA Magnet with M5 screw for Alpha-X Pouch

    Due to popular demand we are now pleased to offer you the DAA Super-Strong magnets, sold separately, for mounting on the DAA Alpha-X / Race Master pouches, or any other type of base you care to use them on.

    These Zinc plated magnets are incredibly strong, offering approx. 87kg of pull strength. With these magnets, you can slap on that magazine quickly and confidently and know that it will not fall off as you move. The magnets measure almost 50mm in diameter, and are 12mm thick (with their casing).

    Fitting to an Alpha-X / Race Master Pouch:
    In the front of the pouch there is a 4.2mm hole, which can be used to attach the magnet to the pouch body. You will need to tap (thread) this hole using an M5 Tap. Do it carefully and slowly as the thread needs to be precise, as there is only a 2.5mm side wall to work with. once done, simply screw the magnet directly onto the front of your leading pouch. We suggest using a little LockTite on it, to keep the screw from opening.

    Do not worry if the tip of the screw protrudes slightly into the pouch body - the magazine does not reach down far enough to hit it.

    from17.95 EUR
    View details
  • DAA Hard Case Medium-300
    DAA Hard Case Medium-300

    DAA Hard Case Medium-300 are IP67 certified, tough, durable and reliable. They may be used in a variety of applications, ranging from firearms and valuable transport, to marine, photography, scuba diving, hunting, fishing, special corps and much more.

    These cases offer superior protection from the elements, water, dust and impacts, making them suitable for a wide array of sectors and applications.

    The DAA Hard Case Medium-300 cases are shipped including a 4 piece set of foam: 2 egg-shell layers of foam in lid and upper case, and beneath that two thick precut-cube foam layers, allowing you to pluck-out the shape of the valuables you wish to transport in the case. Extra sets of foam are available separately.

    Features include:
    · Watertight seal around lid
    · Automatic pressure release valve
    · Two easy to open double throw latches
    · Load tested soft grip handle
    · Holes for double padlocking
    · Stackable interlocking system
    · Thick body material
    · Extra fixing points
    · Full length hinges
    · Pick N Pluck foams in the bottom and convoluted foam in the lid available as standard
    · Rectangular DAA resin logo on the lid
    · Available in Black or Orange color

    External dimension: 336 x 300 x H 148 mm/13.23 x 11.81 x 5.83 inch
    Internal dimensions: 300 x 225 x H 132 (99+33) mm/11.81 x 8.86 x 5.20 (3.90+1.30) inch

    from59.00 EUR
    View details
  • DAA Premium Belt, Inner Belt Only
    DAA Premium Belt, Inner Belt Only

    DAA Premium Belts are sold as a set, including both the outer and inner belts. However, as most shooters know, an extra inner belt is a handy piece of kit. These inner belts are extremely practical for everyday use and perfect for air travel, as they include no metal and no buckle. Sold separately in Black only, in sizes from 28”-50”.

    Note: The "Double Alpha Academy" font color on the inner belt is silver.

    from14.95 EUR
    View details
  • DAA Premium Belt
    from59.95 EUR
    View details
  • Trigger Pull Scale
    Trigger Pull Scale

    Trigger Pull Scale accurately measures trigger pull weight from 8 ounces to 8 pounds. It features an ergonomically shaped handle for consistent direction of pull. Highly visible increment markings and easy to read sliding indicator that stays ont eh maximum weight registered make it easy to read. It measures in 2 ounce increments and is accurate to +/- 2 oz.

    • Accurately measures trigger pull weight
    • Easy to read sliding indicator
    • Range: 8oz to 8lbs (2oz increments)
    from29.95 EUR
    View details
  • DAA Magnetic Grip-Enhancer Holder
    DAA Magnetic Grip-Enhancer Holder

    A cool, new, practical way to carry your Grip-Enhancer into action!

    Many shooters like to carry their Grip Enhancer of choice on their belts, so they can apply it just before the “Load and make ready” command. And what is needed is a quick and secure carrying solution, which allows you fast access to the Grip Enhancer and a quick return to belt retention. The New DAA Magnetic Grip-Enhancer does just that – and in style!

    Two super-strong magnets are fitted into the custom-made silicone belt and bottle attachments, clicking together and locking securely in place. Run, jump or spin – you wont accidentaly dislodge this holder. Yet a moderate tug/rotation motion and it will come away in your hand for quick application.

    The DAA Magnetic Grip-Enhancer Holder is a perfect fit for a bottle of Progrip or for the new DAA GRIPZ lotion. (Any bottle of approx. 34-36mm in diameter could be held securely.)

    Available in Black, Blue or Red colors.

    from13.00 EUR
    View details
  • Brian Enos's SLIDE-GLIDE
    Brian Enos's SLIDE-GLIDE

    Slide-Glide is specially formulated using the highest-grade extreme pressure compound available. It is engineered to have a stringy characteristic that prevents "tracking" or shearing on sliding metal surfaces. It "stays put" by dragging itself back into the friction areas of the cycling slide and barrel. This ability to stay put is far superior to conventional greases such as lithium, or lithium-based metallic greases containing molybdenum or graphite. 

    Further, Slide-Glide's quality of staying put fills gaps between moving parts in the top end, effectively softening the felt recoil. This is especially noticeable on Stock firearms, and also works great on "loose" Open guns. 

    Most unburned powder residues that may become visible in the grease are actually lubricating in nature (graphite), and will not adversely affect the performance of the grease. 

    Which one to choose: 
    For Open guns - choose the "Lite" 
    For Standard guns - choose "#1" 

    2 Oz tubs.

    from14.00 EUR
    View details
  • Mr.Bulletfeeder Dropper die threaded body
    Mr.Bulletfeeder Dropper die threaded body

    A replacement threaded die body for your Mr.Bulletfeeder by DAA Dropper. This threaded body is compatible with all calibers.

    from13.50 EUR
    View details
  • DAA Dry-Fire Target Set (Classic-IPSC)
    DAA Dry-Fire Target Set (Classic-IPSC)

    Dry-firing is one of the most effective methods to improve you shooting skills.

    It is cheap – no ammo is required. It is convenient – you can do it in the comfort of your home (don’t let the neighbors see you…). And it is an excellent way to build subconscious skills without the distractions creates by target feedback – good or bad hits.

    But in order to make your dry-fire practice as productive as possible, it needs to be as realistic as possible. You need to use YOUR gear, your holster and gun, and you need to make sure that you do GOOD practice only. Which means pulling the trigger only when the sight picture is correct!

    Dry-firing without a sight picture is worse than no practice at all – as it does not teach you the critical subconscious skill of breaking the shot ONLY when, and if, the sight picture is correct.

    For this reason it is so important to train with suitable targets to aim at. And since we usually dry fire indoors, in a small space, miniature targets are required so that we can simulate greater distances and achieve a realistic sight picture as we aim and break the shot.

    This DAA Dry-Fire Target Set consists of 20(!) precisely scaled down IPSC Classic targets. When placed on a wall at a distance of 2.5-3 meters, they will serve to simulate targets at distances of 15, 20 and 30 meters.

    These Dry-Fire targets are laser cut and etched from 3mm thick wooden plates, which offer a perfect color match to cardboard, while being firmer and longer lasting.

    The largest of the targets are 32% of full size, and are approx. 18.5 cm tall.

    The medium size are 20% of a full size, and are approx. 11.5 cm tall The smaller targets are 12% of full size and are approx. 6.8 cm tall Three small 17 cm tall popper targets and partial targets are included as well.

    Targets include small holes for convenient hanging.

    from17.95 EUR
    View details
  • SHOTMAXX 2 Silicone Skin
    SHOTMAXX 2 Silicone Skin

    Protect and personalize your SHOTMAXX 2 timer with these custom made silicone skins.

    The skin fits snugly around the body of the watch, offering increased protection and dust and weather proofing. The buttons can easily be activated through the skin, and the display is fully visible.

    Personalize your SHOTMAXX 2 with a choice of four colors: Black, Blue, Red and Yellow.

    from9.95 EUR
    View details
  • SHOTMAXX 2 Case for timer watch
    SHOTMAXX 2 Case for timer watch

    Keep your SHOTMAXX 2 safe and well protected in this handy custom made carry case. The case is designed to offer a compact practical carrying solution for your SHOTMAXX 2 without adding extra bulk or taking up more space in your range bag.

    The “soft vault” style case has a handy D-ring clip allowing you to hang the case on the outside of your range bag for easy access.

    from9.95 EUR
    View details
  • DAA XL650 DEBRIS-OUT CASEFEEDER ADAPTOR
    DAA XL650 DEBRIS-OUT CASEFEEDER ADAPTOR

    The DAA XL650 Debris-Out Casefeeder Adaptor is the answer to a real problem many reloaders are all too familiar with: when cleaning brass with corncob or other dry media, often small bits of media remain mixed with the brass, and are fed down the case feeder tube. When they reach the tighter diameter of the adaptor tube, they wedge against the cases, causing a feeding jam. You then have to stop reloading, take apart the feeding pipe, clear the jam and only then continue.

    But with the new DAA XL650 Debris-Out Casefeeder Adaptor, which replaces the original Dillon case feeder adaptor on your XL650, the slots cut in the pipe allow the debris to fall out the sides onto the small collection tray (we like to keep our workbench clean and neat!) and the chances of a jam-up are greatly reduced.

    A drop on fit to your Dillon XL650

    Not suitable for use on other Dillon reloading models, and cannot be used in conjunction with the DAA XL650 Mini case feeder.

    from26.95 EUR
    View details
  • DAA PCC GLOCK EXTENDED MAG-POUCH SPACER
    DAA PCC GLOCK EXTENDED MAG-POUCH SPACER

    Many PCC shooters use extended Glock Magazines, often with long base pads added for even more capacity.

    To ensure the best possible retention in our Racer and Race Master mag pouches, we are pleased to offer this dedicated extended Glock Side spacer.

    Simply assemble this spacer instead of your short one, and allow the bottom of your long mag to extend out the bottom of the pouch body, for a more balanced more secure retention.

    The long spacer offers three hole positions in which to place the stopper, giving you the ability to experiment and decide for yourself what the best depth for your magazine is.

     

    NOTE:  this spacer is not compatible with the Alpha-X line of pouches. Magazine and Magazine Pouch not inlucded!

    from9.95 EUR
    View details
  • MR.BULLETFEEDER OUTPUT SPRING AND EXTENSION ADAPTOR
    MR.BULLETFEEDER OUTPUT SPRING AND EXTENSION ADAPTOR

    Some Mr.BulletFeeder users have asked for the option to extend the output feed spring, to allow them to position the collator further away, or perhaps position one collator between two presses and use it to alternately feed each machine.

    To meet this request we are pleased to offer the output springs and a screw-on adaptor cap which will allow you to attach to your current spring and extend it up to another 38cm.

     Two sizes are available. The Small (10mm inner diameter) matches the springs used with the rifle caliber machines and the large size (12mm inner diameter) as shipped with the pistol calibers.

     Note that some “do it yourself” supports for the spring will be needed to prevent it sagging under the weight of the bullets. You do need to keep the tube running downwards and prevent bullets from “pooling” in a sagging loop.

    from9.50 EUR
    View details
  • MR. BULLETFEEDER - DROPPER ASSEMBLY
    MR. BULLETFEEDER - DROPPER ASSEMBLY

    The Dropper Assembly is needed for shooters who wish to set up a second tool-head in the same caliber, and wish to quickly transition from, say, 9mm to .38super. Or from one 9mm bullet to another. A change is needed to the collator parts, and if a 2nd tool-head is to be used on the progressive reloader, it is quicker and easier to leave an adjusted Mr.Bulletfeeder dropper on each tool-head. This allows for quick swapovers, without the need to calibrate or adjust the dropper. Note that in most cases you will need to purchase an additional Powder Funnel for your second tool-head’s powder measure, as our expanding powder funnel is required for troublefree reloading.

    from95.00 EUR
    View details
  • CED DELUXE PROFESSIONAL RANGE BAG
    CED DELUXE PROFESSIONAL RANGE BAG

    CED has taken the BEST Range Bag on the market today to an entirely new level of design and function! The result is the new CED Deluxe Professional Range Bag! Starting with the famous CED Professional Range bag, we have added 25% more storage capacity to the new Deluxe Range Bag. Two additional zippered pockets have been added to the bag, one on each end. An over-sized ID holder has been incorporated into the top “U” shaped zippered closure, making it easy to locate and identify your bag. Each bag is made of rugged 600D Polyester weather resistant fabric, with strong chrome-plated metal hardware & heavy duty stitching. Finally, the CED Universal Pouch, attached to an accessory D-Ring on the end of the bag, round out the great features that make the CED Deluxe Professional Range Bag, the ultimate Range Bag to own! Quality! Design! Value! No other Range Bag comes close! * Main compartment locks completely with a "U" shaped top zipper design closure * Double headed zippers to provide locking capability * Seven (7) Magazine Holders * Elastic accessory straps added to hold those little "extras" * Holds up to four (4) Pistols securely * Removable Pistol Insert Sleeve * Ammo Brass Bag * Universal Pouch * Five (5) additional Zippered Pockets for magazine storage and small items * ID Tag Holder * Heavy Duty Chrome Hardware with Padded Shoulder Strap * Fully stitched Rubber Foot Pads to keep the bag dry * Overall Bag 54cm L x 28cm H x 36cm W  

    Comes with mathcing color brass pouch and pistol sleeve. 

    Overall Bag 54cm L x 28cm H x 36cm W / 21.5" L x 11" H x 14.5" W

    from99.95 EUR
    View details
  • SHOTAC SHOOTING PANTS
    SHOTAC SHOOTING PANTS

    Producing the perfect IPSC shooting pants has been a goal of ours at DAA for a long while. We have tried before several times, with varying degrees of success.

    However now, with the new DAA SHOTAC Pants, we believe we have “hit the nail on the head!”.

    Our SHOTAC Pant is made of lightweight, tough and durable rip-stop fabric, which provides ample flex and an extremely comfortable fit. The design and material choice allow you a comfortable range of motion, without appearing loose fitting or baggy. These pants do not look or feel like gym/sweat pants – but they provide as much flexibility and comfort as any sportswear!

    The SHOTAC Pant features include:
    - A self-adjusting tunnel waistband, with a full 2” range of fit
    - An extra frontal pocket for that “load and make ready” magazine (or for your cell phone)
    - Two large rear Velcro pockets
    - Large, quick access angled side pockets
    - Wide belt loops & double layered fabric in the belt area for increased comfort while wearing your shooting rig
    - Double layered knee area, for increased durability
    - Steel front snap with DAA logo. SHOTAC logo embroidered on back pocket flap
    - Fade and stain resistant fabric, available in Black or Navy Blue.

    Size Chart:
    Small:            Waist: 30"-32"   Length 32"
    Medium:        Waist: 32"-34"   Length 33"
    Large:            Waist: 34"-36"   Length 34"
    X-Large:        Waist: 36"-38"   Length 34"
    XX-Large:     Waist: 38"-40"   Length 34"
    XXX-Large:   Waist: 40"-42"   Length 34"

    from69.00 EUR
    View details
  • MR.BULLETFEEDER 2018 HANGER ASSEMBLY
    MR.BULLETFEEDER 2018 HANGER ASSEMBLY

    The 2018 Hanger Assembly for the Mr.Bulletfeeder by DAA ships as standard with all new units leaving DAA as of Jan 2018.

    Should you wish to upgrade your current hanger assembly (the one with the round Delrin pucks and aluminum rods) you can do so by purchasing this new hanger separately. It is reverse-compatible with all previous Mr.Bulletfeeder by DAA units.

    The new hanger is a simplified design, which makes assembly and adjustments to the tilt angle easier and faster to make. The Horizontal aluminum bracket clamps directly onto the motor gear box, allowing for easy assembly on either the left or the right side of the collator, to accommodate your specific position mounting needs.

    The vertical piece hangs over the side of your case feeder, and connects to the horizontal bracket by means of a large M8 bolt, which can be loosened and rotated for tilt adjustments.

    Sturdy attachment to the collator, a simplified design with fewer parts, thick aluminum profiles and way fewer screws make this hanger simpler and easier to setup and adjust.

    Note: Machine NOT included - only Hanger. 

    from29.95 EUR
    View details
  • DAA DELUXE MAGNETIC POUCH
    DAA DELUXE MAGNETIC POUCH

    The DAA Deluxe Magnetic Pouch utilizes two powerful 32mm magnets to hold the magazine securely in place while providing a smoother release than that achieved from the larger standard Magnetic Pouch. The support side walls allow us to use smaller magnets which in turn make the pouches more useable as an all-round pouch for every day use, and not just as a designated pick-up Pouch.

    For those shooters who like the simplicity and minimalist look of an open magnetic pouch - this is the perfect choice! The slim body make it possible to position pouches closer together while still leaving enough room to reach down and grab the magazine correctly. The lack of external or front pouch walls allow the pouches to be spaced that much closer together. Perfect for Standard or Production where one must wear the pouches behind the hip bone.

    The pouch is attached to our new model belt hanger, which locks securely on any 1.5" belt, clamping down to hold tightly even on thinner belts. The pouch can be swivelled around the centre screw (lower magnet's middle) to angle the pouch as designed. The off-centre mounting point on the hanger offers the option of two heights to choose from. The pouch body is machined from solid Delrin and so is tough and durable. Available in Black only.

    Available for Right-Hand users only.

    from35.00 EUR
    View details
  • Mr.Bulletfeeder output spring and extension adaptor
    Mr.Bulletfeeder output spring and extension adaptor

    Some Mr.BulletFeeder users have asked for the option to extend the output feed spring, to allow them to position the collator further away, or perhaps position one collator between two presses and use it to alternately feed each machine.

    To meet this request we are pleased to offer the output springs and a screw-on adaptor cap which will allow you to attach to your current spring and extend it up to another 38cm.

     Two sizes are available. The Small (10mm inner diameter) matches the springs used with the rifle caliber machinesand the large size (12mm inner diameter) as shipped with the pistol calibers.

     Note that some “do it yourself” supports for the spring will be needed to prevent it sagging under the weight of the bullets. You do need to keep the tube running downwards and prevent bullets from “pooling” in a sagging loop.

    from9.50 EUR
    View details
  • Alpha-X/Race Master/Racer Muzzle Support assembly
    Alpha-X/Race Master/Racer Muzzle Support assembly

    Some shooters prefer to have a muzzle support on their competition holster. This is an indisputable fact.

    While most users will find that the Race Master holster functions perfectly without the additional muzzle support, there are some added advantages to using this extension: The muzzle support prevents the gun from being dislodged upwards, which could happen if bumped on the shooters thigh, or against a prop, during a walkthrough. If the holster was left unlocked, the gun can be dislodged. The muzzle support prevents this from happening.

    from17.95 EUR
    View details
  • DAA Output Chute and Spring
    DAA Output Chute and Spring

    he DAA Output Chute can be attached to any reloading press, hanging onto the same bracket which usually holds the Akro-Bin, and replacing it.

    The long, 120cm (4ft) feed spring enables you to run the ammo down to a container on the floor, sparing you the need to empty that bin as you reload, and uncluttering your reloading press.

    from19.95 EUR
    View details
  • DAA Reloading Scale
    DAA Reloading Scale

    The DAA Reloading Scale is a compact-size scale packed full of the latest precision load-bearing technology. This new premium digital precision scale is designed to provide you with the most accurate, consistent information about your powder loads, in an easy to use and easy to calibrate package.

    The DAA Reloading Scale offers read-outs in either grams or grains. It has a load capacity of 20 grams (300 grains) and a division (precision) of 0.001 gram or 0.05 grain, far exceeding the precision offered by even more expensive models on the market. It features a stainless steel load platform and a blue colored backlight display.Accessories included: A hard storage and transport case, 2 x 10 gr calibration weights, a powder pan, tweezers, an antivibration mat and user manual. 

    Covered by a Double-Alpha two year warranty.

    from89.00 EUR
    View details

Contact Us