Shipping calculator

Sale

All products on Sale

Information

Contact Us

MBX

  • MBX Magazine 2011 style STI/SVI
    MBX Magazine 2011 style STI/SVI

     Next Generation of High Performance Competition Ready Magazines for STI/SVI 2011 Styles.

    Made from Heat Treated 410 Stainless for Ultimate Durability.

    No spacer required for 9mm/.38 magazines.

    MBX Complete Tubes were designed to be competition ready with exclusive
    features to meet the highest demands for today's shooters.

    - All 126mm 9mm/.38 magazines hold 20-21 rounds.

    - All 126mm .40/10mm magazines hold 18-19 rounds.

    - All 141.25mm 9mm/.38 magazines hold 23-24 rounds.

    - All 141.25mm .40/10mm magazines hold 20-21 rounds.

    - All 171.25mm 9mm/.38 magazines hold 29-30 rounds.

    *Our tubes are designed exclusively to work with MBX Basepads, Springs,
    and Followers. These tubes are not designed to work with other manufacturers components.

    The tube is designed to work with the MBX Extreme Follower. This is a wider follower with new features that will allow for maximum reliability and capacity.

    Witness holes on rear of tube to indicate round count for all tubes.

    from185.90 EUR
    View details
  • MBX 6” PCC “Mega” Basepad with 28 coil spring
    MBX 6” PCC “Mega” Basepad with 28 coil spring

    MBX "Mega" PCC 6" Competition Extension Basepad with MBX Custom Spring

    Adds Maximum capacity up to 57 rounds

    For Factory Glock 9mm and ETS Magazines only.

    Includes:
    - MBX 6" Mega Extension Basepad
    - MBX 28 Coil Custom Spring

    from119.00 EUR
    View details
  • MBX PCC MINI Base pad with 24 coil spring
    MBX PCC MINI Base pad with 24 coil spring

    MBX "Mini" PCC Competition 4" Extension Basepad with MBX Custom Spring

    Adds Maximum capacity up to 47

    For Factory Glock 9mm and ETS Magazines only.

    Includes: - MBX 4" Mini Extension Basepad - MBX 24 Coil Custom Spring

    from99.00 EUR
    View details
  • MBX complete  magazines for BUL styles with IPSC square basepad
    MBX complete magazines for BUL styles with IPSC square basepad

    The Next Generation of High Performance Competition Ready Magazines for BUL SAS Styles.

    Made from Heat Treated 410 Stainless for Ultimate Durability.

    No spacer required for 9mm/.38 magazines.

    MBX Complete Tubes were designed to be competition ready with exclusive
    features to meet the highest demands for today's shooters.

    - All 126mm 9mm/.38 magazines hold 20-21 rounds.

    - All 126mm .40/10mm magazines hold 18-19 rounds.

    - All 141.25mm 9mm/.38 magazines hold 23-24 rounds.

    - All 141.25mm .40/10mm magazines hold 20-21 rounds.

    - All 171.25mm 9mm/.38 magazines hold 29-30 rounds.

    *Our tubes are designed exclusively to work with MBX Basepads, Springs,
    and Followers. These tubes are not designed to work with other manufacturers components.

    The tube is designed to work with the MBX Extreme Follower. This is a wider follower with new features that will allow for maximum reliability and capacity.

    Witness holes on rear of tube to indicate round count for all tubes.

    from185.90 EUR
    View details
  • MBX Z-Max 11 Coil Spring & Competition Follower Set
    MBX Z-Max 11 Coil Spring & Competition Follower Set

    MBX Z-Max 11 Coil Spring & Competition Follower Set for 140mm & 126mm MBX STI/SVI style tubes

    from33.00 EUR
    View details
  • MBX Z-Max 13 Coil Spring & Competition Follower Set for 170mm & 155mm MBX STI/SVI style tubes
    MBX Z-Max 13 Coil Spring & Competition Follower Set for 170mm & 155mm MBX STI/SVI style tubes

    MBX Z-Max 13 Coil Spring & Competition Follower Set for 170mm & 155mm MBX STI/SVI style tubes

    from36.30 EUR
    View details
  • MBX Recoil reduction Buffer system AR-9mm
    MBX Recoil reduction Buffer system AR-9mm

    The MBX "Patent Pending" Buffer is Designed specifically for Pistol Carbine Caliber. 

    Features an Internal Spring captured within the Buffer to allow for the Buffer/Bolt speed to be significantly reduced during the cycling of the Firearm, resulting in an Extreme Reduction with Felt Recoil.

    - Buffer weight 6.8 ozs - Overall length 4.9 inches - Made from Stainless Steel - Includes internal .062 recoil reduction spring - Captured Pin Design to ensure reliability and Performance

    2 Adjustable Stoke Lengths: - 1.400 Stroke Long - .900 Stroke Short

    In the MBX Buffer tube these parts move at the same velocity as the bolt and run much smoother and silent with a little oil. - Oil the MBX Buffer inside and out - Wipe the main Buffer spring with an oily cloth to add lubrication to the spring - Any medium to light weigh oil is good

    Please see recommendations for matching Springs

    YELLOW Carbine Spring recommended for most Standard Applications min 115 Power Factor up to 145 Power Factor.

    WHITE Carbine Extra Long Spring recommended for 140 Power Factor and Above.

    from199.00 EUR
    View details
  • MBX PCC 9mm Compensator
    MBX PCC 9mm Compensator

    MBX 9mm PCC Compensator "Patent pending"

    Designed specifically for competition shooting to achieve the best performance possible with the lower gas volume Pistol Caliber Rifle.

    Extra tall port design along with offset side semi circle design for increased surface area. Resulting in highly efficient gas redirection which creates improved downforce and greater stability for the ultimate in dot tracking and follow up shots.

    - 20 Deg rear slope port configuration increases compensator forward brake motion to aid in felt recoil.

    - Made from T6 aluminum, hard anodized for light weight and durability.

    - Includes threaded lock nut for easy installation and 6/32 tapped set screw to aid in installation or pinning if required.

    - 3" overall length, .875 wide & 1 1/4" tall

    - Available threads: 1/2 x 28 & 1/2 x 36

    - Weight: 2.4oz

    from150.00 EUR
    View details
  • MBX Fang Stock Extension
    MBX Fang Stock Extension

    MBX "Fang" CTR & Hogue Stock Extensions

    For installation on the Magpul model CTR, this extends the factory Butt Stock to allow for deeper and more stable contact with the shoulder pocket allowing for greater recoil control and added stability when reloading along with a raise stance when used in conjunction with the MBX off set mount.

    from60.00 EUR
    View details
  • MBX C-More Mount Right Handed
    MBX C-More Mount Right Handed

    MBX Offset Scope Mount

    The MBX Offset Scope Mount for full size C-More. Designed for fast and easy "heads up" acquisition when installed on a rifle for PCC competition and steel challenge.

    Allows for extremely fast and easy visual access of red dot without having to place head over top of butt stock centerline.

    Attaches to C-More railway base plate.

    Available right or left handed.

    -For Right Handed Shooter Choose Right Handed Mount  -For Left Handed Shooter Choose Left Handed Mount

    Comes with necessary screws for mounting when used in conjunction with railway mount.

    from45.00 EUR
    View details
  • MBX PCC Buffer Tuning/Rebuild Kit
    MBX PCC Buffer Tuning/Rebuild Kit

    Kit includes: 
    - Spring Buffer Pad 
    - Custom Buffer Pin 
    - Set Screw 
    - Allen Wrench 
    - 3 Springs: 
       "Red" Standard Power .062
       "Green" Reduced Power .055
       "Blue" Lightest Power .047

    from24.00 EUR
    View details
  • MBX Yellow A4 Buffer Spring with Buffer Pad
    MBX Yellow A4 Buffer Spring with Buffer Pad

    YELLOW Carbine Spring recommended for most Standard Applications min 115 Power Factor up to 145 Power Factor.


    from25.00 EUR
    View details
  • MBX 9mm PCC Stainless Steel Compensator
    MBX 9mm PCC Stainless Steel Compensator

    The NEW MBX Stainless PCC Compensator uses the same design as our Patent-pending, Highly Revered, and Extremely Effective Aluminum Compensator, as well as the Stainless version that is ever so popular with our MBX Pro Series PCC Rifles.

    The original slant wall ports with gas capturing ears to increase surface area design, has been slimmed down into a Stainless option that performs at the Top Level while allowing clearance for the barrel nut.

    Diameter - .990 Length - 2.750" Weight - 3.7 oz

    Offered in 1/2X28 and 1/2X36 thread pitch.

    from170.00 EUR
    View details
  • MBX Adjustable 5 Piece Short Stroke Kit
    MBX Adjustable 5 Piece Short Stroke Kit

    A 5 piece Delron stroker kit consisting of a long and medium main contact shim & stack shims .100-.200-.300 to allow multiple combinations of stroke length allowing you to tune your preference in trigger load and cycle speed. For 9mm AR

    from29.00 EUR
    View details
  • MBX Pro Series Lightweight Barrel 9mm
    MBX Pro Series Lightweight Barrel 9mm

    MBX Super Lightweight Barrel weighs Only 12.5oz by itself, after we install our MBX Compensator and we have produced an ALL Stainless 1lb PCC Barrel that comes in at 16.1 inches for Legal Length.

    from590.00 EUR
    View details
  • MBX Pro-Series Signature PCC Rifle 9mm
    MBX Pro-Series Signature PCC Rifle 9mm
        MBX Pro-Series Signature PCC 9x19 Gun 14.5" SS lightweight barell with extended alu mag release and straight trigger.

    from2690.00 EUR
    View details
  • MBX Pro-Series PCC Rifle 9mm
    MBX Pro-Series PCC Rifle 9mm

        1. MBX Pro-Series PCC Gun designed for use with Glock Style Magazines.
        2. MBX Custom Contour 14" Barrel with Polished entry throat made from 416R stainless. Long throat for up to 1.150 OAL., 1.10 twist, zero threaded damage pinning shoulder with the New stainless pinned and welded MBX Compensator. We also offer black 16" Barrel no pinning required.
        3. 14" Barrel has the New MBX stainless Compensator installed, aligned, and pinned to meet ATF 16" legal length.
        4. New MBX Custom Hand-guard designed for ultra light weight with 13" and 15" lengths and M-lock on front portion for attachments. Hand-guard Weight: 8 oz barrel + 3.7 oz nut = 11.7 oz total.
        5. MBX New Super Slick Custom Billet Aluminum low profile Mag-well which is installed on the lower receiver with accent colors available.
        6. MBX Lower blueprinted to our Specifications for consistent and correct Magazine alignment with adjustable set screws.
        7. MBX Adjustable MBX "Patent-pending" stainless steel dual spring Recoil Reduction system. The Recoil System will be set up to your load data in order to give you the best performance "Out of the Box".
        8. MBX includes a complete Buffer Spring tuning kit. So if you change your loads, you can easily tune the system for the ultimate in performance.
        9. Custom MBX coatings and color options with Hard Type 3 on all black and "MBX Gunner Gray" parts.
        10. Your MBX PCC Gun comes with the Target used to test fire at 35 yards that ensures Function, Accuracy, and Performance you expect from MBX.
        11. Billet 7075 Uppers and Lower Receivers.
        12. Chamber headspace/throat checked and set for consistent reliability of rounds up to 1.150 OAL.
        13. Ejector tuned, set, and pinned in place for years of trouble free performance.
        14. Drop in POF curved Trigger. Tuned and set for smooth 3lb pull with a crisp clean 3-4lb reset. No walk pins.
        15. Black Nitride bolt with spring tension extractor for consistent reliability.
        16. Bolt face is chamfered and Micro polished for smooth feeding and reliability.
        17. Features last round bolt open.
        18. Light weight. Overall gun weight 6.5lbs!
        19. Hogue fingerless rubber grip and A4 adjustable stock for the finest in comfort and performance.
        20. MBX includes recommended load data specs to get you started.
        21. Other options and parts available see the gun build form.
    from2490.00 EUR
    View details

Contact Us