Shipping calculator

Sale

Information

Contact Us

Glock- parts

  • Glock Original Magazines
    Glock Original Magazines

    Magazine for Glock pistols and those who use Glock magazines.

    from29.00 EUR
    View details
  • Connector Glock 3.5
    Connector Glock 3.5

    Glock Factory Connector

    Install the 3.5 pound connector! A standard Glock has 5,5 pound triggerpull !!

    This part replaces the factory connector and provides a lighter trigger pull. This will increase the accuracy of most shooters by reducing the amount of muzzle movement when pulling the trigger. 

    Your trigger pull will be 4 lbs when you keep the 6 lbs factory firing pin spring, but if you Change that one out for a competition firing pin spring of 4 lbs you will get the 3,5 lbs trigger.

    Less experienced shooters should ask a gunsmith to install this item.

    from9.00 EUR
    View details
  • Red dot base plate
    Red dot base plate

    Red Dot base plates for different Pistols and red-dots.

    The second picture has a scheme where you can see what fits your combination.

    from69.50 EUR
    View details
  • Magpul PMAG GLOCK Magazines
    Magpul PMAG GLOCK Magazines

    PMAG GLOCK Magazines

    • Compatible with all full-size, compact, and sub-compact 9mm double-stack Glock handguns
    • Durable, lightweight, and extremely stiff polymer construction
    • High visibility controlled-tilt follower
    • Long life stainless steel spring for corrosion resistance
    • Flared, easily removable floor plate
    • Dot matrix panel for magazine marking and identification
    • Magazine indicator windows on both sides of body at 10, 15, and 21 rounds remaining
    • Drops free loaded or unloaded


    from27.95 EUR
    View details
  • Base pad ALU with plate X4 GLOCK
    Base pad ALU with plate X4 GLOCK

    FOR glock MAGAZINES

    NOT FOR MAGWELL USE

    from19.90 EUR
    View details
  • Brass Counter weight for GLOCK 19
    Brass Counter weight for GLOCK 19

    Brass Counter weight for GLOCK 19

    from68.03 EUR
    View details
  • TTI Base Pad Kit +5/6 rounds for Standard Sized Glocks 9/40
    TTI Base Pad Kit +5/6 rounds for Standard Sized Glocks 9/40

    - The +5/6 Base Pad comes with a +10% stronger spring.

    - Overall weight 1.6oz.

    - Length, 1 1/2 inch front side, 3/4 inch on back side.

    - Will work on all full size double stacked GLOCKs.

    - Patented proven push pin design.

    - Super easy to attach and detach from the magazine.

    - No specialty tools or devices required to disassemble.

    - One piece design, no extra parts to possibly lose during disassembly.

    - Fits the USPSA 140mm gauge.

    - Ideal for full size magazines.

    - Holds 20+1 rounds of 40S&W.

    - Holds 23+1 rounds of 9mm.

    - The added weight helps the magazine drop free easily for faster reloads.

    - CNC machined from billet aluminum.

    - Hard Anodized.

    from60.50 EUR
    View details
  • TTI Grand Master Connector Kit
    TTI Grand Master Connector Kit

    TTI Grand Master Connector Kit Any great shooter who knows their way around a Glock will tell you that the key to having the optimal set-up is a great connector kit and extra springs.

    from60.50 EUR
    View details
  • TTI Base Pad Kit for Standard Sized Glocks 9/40 +3/4 rounds
    TTI Base Pad Kit for Standard Sized Glocks 9/40 +3/4 rounds

    TTI Firepower Base Pad Kit for GLOCK.

    - Will work on all full size double stacked GLOCKs.

    - Overall weight 0.8oz.

    - Length, 1/2 inch.

    - Patented proven push pin design.

    - Super easy to attach and detach from the magazine.

    - No specialty tools or devices required to disassemble.

    - One piece design, no extra parts to possibly lose during disassembly.

    - Fits the USPSA 140mm gauge.

    - Works only on high-cap double stacked GLOCK OEM magazines.

    - Holds 18+1 rounds of 40S&W.

    - Holds 21+1 rounds of 9mm.

    - The added weight helps the magazine drop free easily for faster reloads.

    - CNC machined from billet aluminum.

    - Hard Anodized.

    from42.90 EUR
    View details
  • OVERSIZED MAGAZINE RELEASE GLOCK
    OVERSIZED MAGAZINE RELEASE GLOCK

     Brand Glock  Model: Gen.3 

    Code PMPG3

    from19.00 EUR
    View details
  • 4 HOLES FINGER REST
    4 HOLES FINGER REST

    4 HOLES FINGER REST  Left side  Right shooter

    Code: AD4SX

    from45.02 EUR
    View details
  • CAA RONI-G2 For Glock 17, 18, 19, 22, 23, 25, 31, 32
    CAA RONI-G2 For Glock 17, 18, 19, 22, 23, 25, 31, 32

    The RONI (pat-pending) provides you a better grip, stability & platform to many accessories. Now you can use your pistol for a greater range, faster aiming, better accuracy.

    New design improves integration between the pistol and the RONI.
    The pair now function as one seamless unit.
    larger gas ports - improves ventilation, allowing gases to escape quickly and reduce heat buildup.
    Features a larger ejection port to eliminate jams and stove piping.
    Longer upper Picatinny rail -25cm
    Design to fit the Glock 18 - the auto switch is exposed to operate.
    The cocking handle is longer & tighter on the pistol’s slide.
    Optional locking screws – locks the pistol even tighter & prevents quick access/installation if needed. Delivered without optics or sights. Front tactical light not included.

    RONI-G2-9 For Glock 17, 18, 19, 22, 23, 25, 31, 32


    Made Of Aluminum and Poly.

    Measurements:
    Weight (gr) 1315
    Length (cm) 49
    height (cm) 14
    width(cm) 6.5

    Rails in total : 4

    from465.95 EUR
    View details
  • GLOCK FACTORY EXTENDED SLIDE STOP LEVER 9mm
    GLOCK FACTORY EXTENDED SLIDE STOP LEVER 9mm

    Factory Glock extended slide stop lever with a larger surface area that allows the shooter to maintain a better grip when releasing the slide at increased speeds.

    Does not work on gen 5 models.

    from15.00 EUR
    View details
  • GLOCK EXTRACTOR 9mm
    GLOCK EXTRACTOR 9mm

    Glock Extractor 9mm

    from18.00 EUR
    View details
  • MBX PCC MINI Base pad with 24 coil spring
    MBX PCC MINI Base pad with 24 coil spring

    MBX "Mini" PCC Competition 4" Extension Basepad with MBX Custom Spring

    Adds Maximum capacity up to 47

    For Factory Glock 9mm and ETS Magazines only.

    Includes: - MBX 4" Mini Extension Basepad - MBX 24 Coil Custom Spring

    from99.00 EUR
    View details
  • Glock 17/19 Grip
    Glock 17/19 Grip

    Glock 17/19 Grip with small parts inside

    from220.00 EUR
    View details
  • TTI Ultimate Fiber Optic Sights Set for Glock
    TTI Ultimate Fiber Optic Sights Set for Glock

    PRODUCT DESCRIPTION

    TTI Ultimate Fiber Optic Sights Set for Glock

    *COMPLETE SIGHT SET WILL COME WITH BOTH RED & GREEN FIBER OPTIC RODS. INDIVIDUAL COMPONENTS WILL NOT INCLUDE FIBER OPTIC.*

    Replacement Fiber Optic  - https://tarantacticalinnovations.com/replacement-fiber-optic-rod/

    - 1/16 allen key.

    - POA/POI set at 15 yards for Full Sized Glocks using 124 grain ammo. If you put the sights on another Glock (Sub compact/compact) the POA/POI will change since the sight ratio has changed. Figure out what your given POA/POI is for other Glock models and remember it. Take into account what type ammo you are using, different grain and bullet weight can change the bullets flight path.

    - The TTI Ultimate Fiber Optic Sights for GLOCK were designed to the specifications of Taran Butler and Robert Vogel, for optimum sight picture and the brightest fiber optic front sight possible.

    - The fiber optic dot has been moved up to the very top of the front sight so that the shooter will not get confused with shooting off the top of the dot or a big/thick blade sitting above it - Which can cause the shooter to shoot either too high or too low.

    - The fiber optic bar is NOT partially embedded into the floor of the sight. That means that more light reaches a greater portion of the circumference of the rod.

    - Our shiny, stainless steel screw, reflects even more light right to the middle of the rod.

    - As an added bonus, the front sight is designed to also be compatible with the GLOCK factory screw in case it is dropped or lost at the time of installation.

    - The front of the rear sight is angled to allow one-handed charging from your belt, pants, or any other object.

    - The front sight is .235" tall and .115" wide for perfect point-of-impact with the GLOCK 17, 17L, 19, 20, 21, 22, 23, 24, 34, and 35.

    - The rear is .245" tall. The tighter .125" rear notch helps dramatically when shooting small steel and tight shots at a distance.

    - Rear serrations cut down on glare. Both front and rear sights are billet stainless steel coated with Diamond Black Ion Bond (95 Rockwell hardness) for the highest level of rust resistance and the strongest finish.

    R

    from139.00 EUR
    View details
  • Glock Magazine base pad +2
    Glock Magazine base pad +2

    New design Glock base pad. New features is a tight grip and deep side grooves that makes sure your handling is swift and precise, it adds the extra needed support for one-handed manipulation. Magazine base pad fits into the original Glock magazine notches.

    Magazine pad is precisely-engineered in our factory and features easy disassembly and assembly without any tools required. Finger grip will make sure that you will get the best out of the product even when using both hands.

    Base pads will add additional 2 rounds to your Glock magazine.

    They come in 5 colors – Black, Red, Blue, Gold and Silver.

    Made in Europe from a solid piece of finest aircraft grade aluminium.

    from19.90 EUR
    View details
  • Ghost THE ONE holster
    Ghost THE ONE holster


    GHOST THE ONE is the first holster created by Sandro Amadini.

    Locking system consists of a polymer locking sphere providing security and speed. The completely adjustable barrel support bar offers support for all barrel lengths.
    The belt attachment is the same as on the Super Ghost Ultimate and Thunder.

    from129.00 EUR
    View details

Contact Us