Shipping calculator

Sale

All products on Sale

Information

Contact Us

2011

  • Magazin for 2011
    Magazin for 2011

    The new mags are here! The one piece design improves feeding and reliabilty. Mag body has round count indicators to see rounds remaining while sti and caliber are stamped on the front which make the magazine caliber easily identifiable. New design on feed lips and followers to give you a smooth, seamless transition from magazine to chamber. All design features allow for easier, quicker reloads. This mag has it all!

    FEATURES: 

    • new follower & feed lip design 
    • round count indicators 
    • caliber markings 
    • stronger and more consistent design 
    • one piece construction 
    • no spacer required
    from85.00 EUR
    View details
  • MBX Magazine 2011 style STI/SVI
    MBX Magazine 2011 style STI/SVI

     Next Generation of High Performance Competition Ready Magazines for STI/SVI 2011 Styles.

    Made from Heat Treated 410 Stainless for Ultimate Durability.

    No spacer required for 9mm/.38 magazines.

    MBX Complete Tubes were designed to be competition ready with exclusive
    features to meet the highest demands for today's shooters.

    - All 126mm 9mm/.38 magazines hold 20-21 rounds.

    - All 126mm .40/10mm magazines hold 18-19 rounds.

    - All 141.25mm 9mm/.38 magazines hold 23-24 rounds.

    - All 141.25mm .40/10mm magazines hold 20-21 rounds.

    - All 171.25mm 9mm/.38 magazines hold 29-30 rounds.

    *Our tubes are designed exclusively to work with MBX Basepads, Springs,
    and Followers. These tubes are not designed to work with other manufacturers components.

    The tube is designed to work with the MBX Extreme Follower. This is a wider follower with new features that will allow for maximum reliability and capacity.

    Witness holes on rear of tube to indicate round count for all tubes.

    from185.90 EUR
    View details
  • TTI Base Pad for STI/SV +3/4mm small
    TTI Base Pad for STI/SV +3/4mm small

    The TTI Base Pad for STI, SV, SPS, & Rescomp Magazine Tubes.

    Use the TTI Base Pad with the TTI spring and TTI Follower for maximum capacity.

    - Available in 3mm, 4mm, and 7mm.

    - 3mm for SV/SPS/Rescomp 140/170mm magazines.

    - Rescomp 21rds in 140mm 40S&W

    - 23rds in 140mm 38/9mm.

    - 29-30rds in 170mm 38/9mm

    - Weighs .3 oz

    from55.00 EUR
    View details
  • Dawson Precision Basepad HiCap for STI/SV Extended  IPSC Box Standard Division
    Dawson Precision Basepad HiCap for STI/SV Extended IPSC Box Standard Division

    Carry/International Box Basepads for STI/SV. Great for Carry, Fits in IPSC Standard and Modified Box Rule. The DP basepads are designed to give additional capacity while staying very ergonomic for carry application. They fit the IPSC box rule requirement. Above all, they have a toolless design locking key seat cut in the basepad allowing it to be locked in place by the pressure of the mag spring. CNC machined from aircraft grade aluminum. 

    from30.45 EUR
    View details
  • DP Basepad HiCap for PARA Extended Tool-less Design +1
    from44.10 EUR
    View details
  • MBX complete  magazines for BUL styles with IPSC square basepad
    MBX complete magazines for BUL styles with IPSC square basepad

    The Next Generation of High Performance Competition Ready Magazines for BUL SAS Styles.

    Made from Heat Treated 410 Stainless for Ultimate Durability.

    No spacer required for 9mm/.38 magazines.

    MBX Complete Tubes were designed to be competition ready with exclusive
    features to meet the highest demands for today's shooters.

    - All 126mm 9mm/.38 magazines hold 20-21 rounds.

    - All 126mm .40/10mm magazines hold 18-19 rounds.

    - All 141.25mm 9mm/.38 magazines hold 23-24 rounds.

    - All 141.25mm .40/10mm magazines hold 20-21 rounds.

    - All 171.25mm 9mm/.38 magazines hold 29-30 rounds.

    *Our tubes are designed exclusively to work with MBX Basepads, Springs,
    and Followers. These tubes are not designed to work with other manufacturers components.

    The tube is designed to work with the MBX Extreme Follower. This is a wider follower with new features that will allow for maximum reliability and capacity.

    Witness holes on rear of tube to indicate round count for all tubes.

    from185.90 EUR
    View details
  • MBX Z-Max 11 Coil Spring & Competition Follower Set
    MBX Z-Max 11 Coil Spring & Competition Follower Set

    MBX Z-Max 11 Coil Spring & Competition Follower Set for 140mm & 126mm MBX STI/SVI style tubes

    from33.00 EUR
    View details
  • MBX Z-Max 13 Coil Spring & Competition Follower Set for 170mm & 155mm MBX STI/SVI style tubes
    MBX Z-Max 13 Coil Spring & Competition Follower Set for 170mm & 155mm MBX STI/SVI style tubes

    MBX Z-Max 13 Coil Spring & Competition Follower Set for 170mm & 155mm MBX STI/SVI style tubes

    from36.30 EUR
    View details
  • Grams Format replacement mag springs
    Grams Format replacement mag springs

    his package contains () mag springs, 11 and 13 coils long, designed to fit a ''Grams Format'' follower. They are a replacement spring for any of the Grams ''Follower Kits''.

    from59.90 EUR
    View details
  • Arredondo +3 Base Pads 2011
    Arredondo +3 Base Pads 2011

    These base pads will increase the capacity of your magazines by at least 2 rounds, and in most cases by 3. The base pads includes the inner plate to ensure positive lock up and prevent the follower from sticking under the mag-tube ribs. 
     
    Specify gun type and caliber when ordering. 
    Available for 1911 hi cap guns only.

    from22.00 EUR
    View details
  • Spring and follower upgrade kit 2011
    Spring and follower upgrade kit 2011

    VIDEO: instructions

    Spring and follower upgrade kits for bul SAS II magazines is now available.

    9mm 170mm mags 30 rounds capacity reloadable

    9mm 140mm maga 24 rounds capacity reloadable

    0.40 120mm 19 rounds capacity reloadable

    from17.90 EUR
    View details
  • Base Pad For STI/SV/BUL Magazines
    Base Pad For STI/SV/BUL Magazines

    PRODUCT DESCRIPTION

    The pin set screws are set with Loctite® at the specific tension we recommend, and will generally never need an adjustment. Tightening the base pad screw is not recommended and may be difficult because the screw is set with Loctite®; trying to force the set screw to turn could result in stripping the screw. We do not warranty base pads for stripped heads on set screws or pins lost in result of tampering with the set screw.

    Using the table below, you will be able to identify what parts you will need for your given pistol depending on what division you want to shoot.

    To use this Table: First, look for what division in which you want to shoot. Second, find the the Tube Length. Third, locate what caliber are you shooting. Once you have found all of identified what parts you are using, you will then be able to see which basepad, spring and follower you will need. You will also be able to tell what capacity you achieve with the given configuration.

    from55.00 EUR
    View details
  • 2011 brass +1 base pad
    2011 brass +1 base pad

    2011 brass +1 base pad (fits in standard box IPSC) with 120 and 126 magazines

    from19.99 EUR
    View details
  • Mag 170 SVI 9MM, 38 super
    Mag 170 SVI 9MM, 38 super

    Standard length for full size grip and common for IDPA and IPSC. Complete magazines Tuned for Infinity Competition (wide body) guns. Price includes an Aluminum basepad.

    from190.00 EUR
    View details
  • Magazin base pads +1, +2
    Magazin base pads +1, +2

    Dawson Tool-less Basepad +1 and +2 for STI 2011 and 2011 clones.

    from44.10 EUR
    View details
  • Magwell DP 2011 ICE
    Magwell DP 2011 ICE

    Aluminium magwell from Dawson Precision for SVI and SV 2011 pistols

    from26.25 EUR
    View details

Contact Us