Shipping calculator


All products on Sale


Contact Us

Case preperation


    Until now, reusing military brass, with its crimped primer pockets, has been a tedious task. The Dillon solution is a remarkably simple device that bolts to your bench and allows you to swage the primer pockets with speed and ease. The case is supported from the inside, so you won't be tearing the rims off the brass. A tool steel, hardened swage rod (easy to change from large to small primers) simply rolls the crimp away. No reaming is necessary. Our unique compound cam leverage system assures not only ease of operation, but perfect alignment with each and every round. Sound simple? It is and it works. What's more, it's inexpensive. The Super Swage 600 comes with large and small swage rods, .22 and .30 caliber backup rods, and a 45ACP adapter. 

    from136.29 EUR
    View details
  • DAA Kinetic Bullet Puller Hammer
    DAA Kinetic Bullet Puller Hammer

    The DAA Bullet Puller is a must-have for serious reloaders. This tool takes all the hassle out of separating your used cases from the bullet and powder. The tool itself is formed from high-quality plastic with an aluminum rod to ensure many years of durable performance.

    The DAA Bullet Puller can be used for ammunition of all sizes ranging from .17 Remington to .50/70 Government cases. This tool comes with an extra set of three collets, should the originals happen to break. The tool itself is virtually indestructible and makes quick work of disassembling your ammunition for reloading.


    from24.95 EUR
    View details
  • Lyman 2500 ProMag Tumbler
    Lyman 2500 ProMag Tumbler

    No other tumbler can equal the value of this high capacity machine.

    Lyman's Pro Magnum Tumbler is designed for the high volume reloader, and high volume reloaders are always looking for value. The two gallon capacity bowl is engineered to deliver powerful cleaning action even at full capacity. Handling up to 1000 .38 Special cases at a time, the heavy-duty motor and advanced drive system deliver fast cleaning and long life.

    from129.00 EUR
    View details
  • Lyman Easy Pour Media for Tumblers
    Lyman Easy Pour Media for Tumblers

    Lyman Turbo® Case Cleaning Media

    The media designed for your Lyman tumbler.

    Lyman Case Cleaning Media is the most effective choice for cleaning dirty and tarnished cases. A few hours 
    in a Lyman Turbo Tumbler and the cases will be clean, polished and ready for reloading. Specially Treated Corncob

    from22.00 EUR
    View details
  • Swager Pro for Dillon XL650
    Swager Pro for Dillon XL650

    Armanov Primer pocket Swager Pro for Dillon Xl-650 reloading machine was developed from grund up, based on expirience and many trials and tests was made to make it perfect. Our goal was to make swager for quick mount as possible and reliable usage. There is no need to remove swager base when feeding live primers. Custom wrench is included to easily remove primer seater assembly and install primer swager pin. Swager base is made from steel with nice nickled finish. Swager base has countersink holes for screws so it aligns swager base to machine perfectly. There is additional screw to fine tune primer pin perfectly with rotary primer disc. We made totaly new design in swager pin geometry.  Pin geometry is designed to work with all kind of crimps like 3 point crimps or round crimps that is usually used in military brass. Primer pins are made from top quality steel that is additionaly hardened with process called Carbonitriding. With such finish primer pins are very hard and waer resistant. Primer pins are made within strict tolerance where every primer pin must be within 0,01mm (0,0004 inch) to resize primer pocket if needed. Swager actually re-sizes the primer pocket and adds the correct chamfer for easy primer entry. Armanov swager pro has unconditional lifetime warranty. If your swager wears out or brakes, just send it back to us and we will send you another free of charge!

    Armanov Swager Pro features:

    • No loose screws or wobbling parts.
    • Super fast and easiest swager setup and pin change
    • Small and large primer pins available
    • Carbonitrated primer pins for toughnes and wear resistance.
    • Unique fine primer base aligment with additional screw
    • Included custom wrech for primer pin and primer seater assembly
    • Swager pin tolerances within 0,01mm (0,0004 inch)
    • Swager actually re-sizes the primer pocket and adds the correct chamfer
    • Use with case feeder and swage more than 1000 rounds per hour.
    • Lifetime warranty

    from39.00 EUR
    View details
  • Lyman Turbosonic Case Cleaning solution
    Lyman Turbosonic Case Cleaning solution

    Cleaning with wet Rotary Tumblers or Ultrasonics requires the correct solution for the correct cleaning application. Lyman has partnered with a renowned chemical research team to develop the right solutions for use with today's new Cleaners. The Turbo Sonic case cleaning solution was formulated to deliver premium results in cleaning cases inside and out. The 32oz. value sized concentrated solution is the ideal way to save while producing "like-new" results.

    - Specially formulated for optimum cleaning results
    - Concentrated
    - Value Sized 32 oz.

    from29.00 EUR
    View details
  • Dillon Rifle Case Gauges .223
    Dillon Rifle Case Gauges .223

    Rifle headspace case gauges assist in proper size die adjustment and in checking cases for whether they need to be trimmed. Essential for long case life, especially with semi-automatic firearms! Made of stainless steel for long life.

    from40.42 EUR
    View details
  • Dillon Rapid Polish 290. - 8 oz. 236 mL
    Dillon Rapid Polish 290. - 8 oz. 236 mL

    SHINE? You bet your brass! Dillon Precision has developed another exciting new product to make your reloading faster and easier. Rapid Polish 290 is the first cartridge case finish designed specifically to bring a brilliant shine (20 percent brighter than tumbling media alone) and a protective coating to reloaded ammunition. Simply add several capfuls to the media in your tumbler and run. Rapid Polish 290 has a great residual value and stays in your tumbling media. You'll use less each time you clean your cases.
    Rapid Polish 290 contains no ammonia, so it won't weaken brass cases!

    from11.55 EUR
    View details
  • Dillon SmallTumbler, CV-750, 220V
    Dillon SmallTumbler, CV-750, 220V

    Dillon's CV-750 Vibratory Case Cleaner is perfect for reloaders with limited space. CV-750 bowl is 12" across, the unit is 12" tall. Capacity of 500 pieces of 45ACP or 38/357, or about 200 pieces of 30-06 brass. All the electrical/electronic components of Dillon equipment are covered by a one-year warranty from date of purchase. This unit is designed for dry media only.  Use of water or wet media will void the warranty. 

    Note: Tumblers are not designed for tumbling loaded ammunition


    from257.56 EUR
    View details
  • Berry´S bullet puller
    Berry´S bullet puller

    Mistakes happen, so be prepared. Our hammer-style Bullet Puller quickly removes your bullets without damaging the bullet or the case. The rubberized grip is easy on your hands and we have also added a rubber insert inside the hammer tip to make it easy on your bullets. Easy and convenient to use whether checking an occasional  reload or pulling hundreds of bullets.

    This Hammer Set comes with 4 collets.


    Collet information:
                                            Pistol                                      Rifle
    Black (X-Small) -    .25 ACP                        Small Rifle Calibers
    Blue (Small) -           .32 - .380                      17 Rem - 223 Rem
    Green (Large) -       9mm - 10mm                       6mm - 8mm    
    Red (X-Large) -      .41 - .45 ACP                  Belted Mags - 45-70

    from38.11 EUR
    View details
  • Dillon Large Media Separator CM-2000
    Dillon Large Media Separator CM-2000

    CM-2000 Case/Media Separator is large, 25,4 x 35,5 cm and will hold more than 1,600 .38 Special cases. It sits on a large media collection tub that measures 45,7 x 55,9 cm. The tub keeps the mess off the floor and bench. It's fast -- so fast it will remove media from 1500 rounds of .223 brass in a matter of seconds.

    from98.17 EUR
    View details
  • Dillon Small Media Separator CM-500
    Dillon Small Media Separator CM-500

    The CM-500 Case/Media Separator is scaled down in size and designed to handle the load of a CV-500 Case Cleaner. This piece of equipment are every bit as tough as its full-sized counterpart. We used the same materials in its construction and designed it to work just as hard -- and do it in a more compact area!

    from61.21 EUR
    View details
  • Dillon Large Tumbler, CV2001, 220V
    Dillon Large Tumbler, CV2001, 220V

    Dillon's CV-2001 Vibratory Case Cleaner is the largest in the industry. Its 12-1/2 quart bowl capacity will allow you to polish up to 1,300 .38/.357 or 550 .30-06 cases per hour.
    Not only is our capacity greater, but our motor is larger in horse power, internally cooled, thermally protected, and turns on precision ball bearings. This is no "hobby" machine!
    The bowl and base are constructed of 7/32" thick injection molded high-strength polypropylene which is impact and abrasion resistant.

    Note: Tumblers are not designed for tumbling loaded ammunition.

    from273.73 EUR
    View details
  • Lyman tumbler 1200 Pro Sifter
    Lyman tumbler 1200 Pro Sifter

    The Lyman Turbo 1200 Series Tumblers feature a beefed-up suspension system and built-in "exciters" for better tumbling action and faster cleaning. The drive system has improved air flow for cooling and longer motor life. The PRO Case tumbler bowl system offers a built-in sifter lid for easy sifting of cases and media at the end of the polishing cycle without requiring the additional purchase of a media sifter. 

    Technical Information:

    Voltage:110 Volt or 220 Volt
    Material: Plastic
    Bowl Capacity: 10" Bowl holds Approximately 350-38 Special Cases 
    Media Included: No 
    Media Capacity: 2 Pounds 
    Features: 10" Bowl, Lid converts into sifter

    Note: Tumblers are not designed for tumbling loaded ammunition

    from95.00 EUR
    View details
  • Frankford Impact bullet puller
    Frankford Impact bullet puller

    When you need to pull some bullets for whatever reason, and impact style tool is the easiest method. Just one stern “whack” and the bullet is separated from the brass. It is that easy. Three different collets are included allowing you to pull bullets  from just about every caliber rimmed or rimless. Versatility makes this bullet puller the only one to have.

    from24.00 EUR
    View details
  • Case lube 100ml
    Case lube 100ml

    G.B.O. Reload case lube non-greasy . One till two sprays every 100 cases in casefeeder.

    from17.00 EUR
    View details
  • Case gauge 9x19 and 40S&W in one
    Case gauge 9x19 and 40S&W in one

    Pocket Case Gauge for 9x19 and 40S&W

    This Pocket case gauge is intended to be used anywhere to ensure absolute correct dimensions .

    Serious competitors are aware of the importance of drop-testing one's bullets before a match. Since most malfunctions are ammo related, and most of those relate to deformed, bulging or otherwise defective brass - dropping the bullets into a gauge is an effective way to reduce the chance of a costly malfunction. This handy keyring gauge is always with you and will never get lost.

    And when you have cases stuck in the gauge you can take them out without tools because the Gauge is shorter than the ammunition you test.

    CNC machined from top quality aluminium, red or blue anodized.

    from19.90 EUR
    View details

Contact Us