Shipping calculator

Sale

All products on Sale

Information

Contact Us

Rifle Accessories

  • Safety flag
    Safety flag

    RC Rifle flag .. A must for every shooter on the range.

    No doubt about the condition of the gun, a flag in the action and the rangemaster is sure the gun is unloaded.

    from4.00 EUR
    View details
  • MBX 6” PCC “Mega” Basepad with 28 coil spring
    MBX 6” PCC “Mega” Basepad with 28 coil spring

    MBX "Mega" PCC 6" Competition Extension Basepad with MBX Custom Spring

    Adds Maximum capacity up to 57 rounds

    For Factory Glock 9mm and ETS Magazines only.

    Includes:
    - MBX 6" Mega Extension Basepad
    - MBX 28 Coil Custom Spring

    from119.00 EUR
    View details
  • MBX PCC MINI Base pad with 24 coil spring
    MBX PCC MINI Base pad with 24 coil spring

    MBX "Mini" PCC Competition 4" Extension Basepad with MBX Custom Spring

    Adds Maximum capacity up to 47

    For Factory Glock 9mm and ETS Magazines only.

    Includes: - MBX 4" Mini Extension Basepad - MBX 24 Coil Custom Spring

    from99.00 EUR
    View details
  • HARRIS Bipods
    HARRIS Bipods

    HARRIS BIPODS

    from150.00 EUR
    View details
  • ATLAS B&T Bipod
    ATLAS B&T Bipod

    While some choose to discover nothing, inspire no one and dream small we here at B&T have taken a different path. The Patented Atlas Bipod lines brought new and novel features to the bipod that had not been seen before (including built in Pan and Cant and the novel 45 degree leg positioning). We own these ideas and encourage our customers to Accept No Substitutions

    from320.00 EUR
    View details
  • BT15: 3.35" 1913 picatinny rail
    BT15: 3.35" 1913 picatinny rail

    BT15: 3.35" 1913 Rail

    The BT15 - 3.35" 1913 Rail will accommodate hole patterns with a center to center spacing of 1.76 – 2.78" and a relieved back to accommodate curved surfaces. A standard sling stud and sling stud spacer can be used as one fastener or two button head machine screws can be used. NO HARDWARE IS INCLUDED. See BT1517 to attach this rail to the forearm of standard rifle stocks. Available in black only.

    from40.00 EUR
    View details
  • BT12-QK: Standard Accu-Shot picatinny rail monopod
    BT12-QK: Standard Accu-Shot picatinny rail monopod

    BT12-QK: Standard Height Accu-Shot® Precision Rail Monopod

    The BT12-QK is our standard height Precision Rail Monopod (PRM) with QK01 Quick Knob. Attaches to standard 1913 Picatinny rail. Available in black only.

    Elevation Range: 3.75 – 4.65”

    Folded Length: 3.85" approximate

    Weight: 7.4 ounces

    from150.00 EUR
    View details
  • A.R.M.S. HARRIS TYPE QD Bipod throw lever
    A.R.M.S. HARRIS TYPE QD Bipod throw lever

    Designed to allow the fastest attach/detachability possible. 

    No gunsmithing required, simply remove the adjustment screw assembly and install the A.R.M.S.® Throw Lever® assembly.

    Designed to allow the lever to be attached to either side of the bipod, for a light weight low profile attachment.

    from195.00 EUR
    View details
  • A.R.M.S. AIMPOINT MICRO MOUNT
    A.R.M.S. AIMPOINT MICRO MOUNT

    A.R.M.S.® #31™ Aimpoint Micro Mount

    Throw Lever® Mount for the Aimpoint T-1 Micro sight. See Spacer section for spacer.

    from140.00 EUR
    View details
  • AMERICAN DEFENSE QD ADAPTER FOR HARRIS BIPOD
    AMERICAN DEFENSE QD ADAPTER FOR HARRIS BIPOD

    Description

    The AD-BP Bipod Mount enables you to attach a Harris bipod to your railed forearm. Not compatible with the Tac Lever ( Lever interferes with the bipod itself ). It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems.

    Bipod is not included.

    from105.00 EUR
    View details
  • AMERICAN DEFENSE DOCTER MINI/BURRIS QR MOUNT
    AMERICAN DEFENSE DOCTER MINI/BURRIS QR MOUNT

    Description

    The AD-22 Burris FastFire Mount was designed as a quick detach solution for the Burris FastFire 1,2 and 3 mini red dot optics. Also fits the Doctor mini red dot and Vortex Viper and Vortex Venom Red Dot sights. It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems.

    from95.00 EUR
    View details
  • AMERICAN DEFENSE AIMPOINT QR CO-WITNESS MOUNT
    AMERICAN DEFENSE AIMPOINT QR CO-WITNESS MOUNT

    Description

    The Aimpoint T-1/H-1 Micro Mount ( Aimpoint not included ) is a pre-assembled unit utilizing our AD-B2 modular base and your choice of risers ( co-witness or SOCOM height ). This mount also fits the Vortex SPARC and Primary Arms Micro Dot. It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems.

    Red DOT is not included

    from125.00 EUR
    View details
  • AMERICAN DEFENSE SCOPE MOUNT 30MM
    AMERICAN DEFENSE SCOPE MOUNT 30MM

    Description

    The AD-RECON mount is made for putting high power glass onto a flattop style AR-15. The AD-Recon works with scopes with Objective Housings as large as 56mm. The cantilever throws the scope out front, allowing you to get the right eye relief. It is precision machined from 6061 T6 aluminum and finished in hard coat T3 Mil-Spec anodize. It features the Patented QD Auto Lock™ Lever system to accommodate both in spec and out of spec rail systems.

    from255.00 EUR
    View details
  • MAGPUL PMAG AK MOE 7,62X39
    MAGPUL PMAG AK MOE 7,62X39

    Product Details

    The PMAG 30 AK/AKM GEN M3 is a durable, lightweight, high reliability 30-round polymer magazine designed for Kalashnikov pattern rifles in 7.62x39mm (AK-47, AKM, AKS, SIG556R, and others.)

     It features steel-reinforced locking lugs, removable floorplate, constant curve geometry, and a high-reliability/low-friction follower for the performance and military-grade durability you expect from a PMAG.

    from23.00 EUR
    View details
  • Magpul Armorers Wrench AR15/M4
    Magpul Armorers Wrench AR15/M4

    Product Details

    American-made, solid steel construction with grip-enhancing phosphate finish engages both stock and pin-style barrel nuts. Fits standard sized flash hiders. Installs and removes rifle receiver extensions and carbine castle nuts, with extended teeth for use with ASAP plates. Two hammer faces. Works with 1/2" torque wrench, relevant torque specifications included on Wrench for quick reference. Convenient Bottle Opener for refreshments after the build is complete (fits both Metric and SAE bottle caps.)

    Made in U.S.A.

     

    Features

    • American-made with US steel
    • Heat-treated steel construction with manganese phosphate finish
    • USGI barrel nut wrench
    • Free-float tube barrel nut wrench
    • 1/2" torque wrench/breaker bar interface
    • Armorer's hammer
    • Rifle-length/Entry-length receiver extension wrench
    • USGI castle nut wrench*, usable with aftermarket end plates such as the ASAP® and ASAP®-QD
    • 3/4" wrench for most flash hiders/muzzle brakes
    • USGI torque spec references
    • Bottle opener

    Specs

     

    Specifications

    Armorer's Wrench – AR15/M4

    • Weight: 1.1 lb.
    • Length, maximum: 11.7 in.
    • Handle Thickness: 0.35 in.

     

    NOTE: Not compatible with larger pistol-style receiver extension tubes


    from122.00 EUR
    View details
  • Magpul BEV Block AR15/M4
    Magpul BEV Block AR15/M4

    Product Details

    The BEV Block (Barrel Extension Vise) is an all-in-one, compact vise block tool for AR15/M4 assembly operations of barrel nuts, flash hiders, etc.

    Mounts securely in a vise and provides support for both billet and forged upper receivers. Engages barrel extension with solid steel lugs and full length support shank to prevent flexing. Steel hardness is optimized for durability yet won't damage barrel extension, and Magpul Polymer is used for all other engagement surfaces to protect aluminum receiver. O-ring post uses bolt carrier for additional stability and included Pin keeps upper in proper position.

    The BEV can also be turned over and used as a mag well vise block to support the lower receiver during maintenance, etc.

    Made in U.S.A.

     

    Features

    • Provides support for all AR15/M4 upper and lower receivers
    • Solidly engages barrel extension with steel lugs
    • Full-length steel support shank
    • Body made from the same high-quality polymer as other Magpul products

     

    Specs

    Specifications

    BEV™ Block – AR15/M4

    • Weight: 11.2 oz.


    from79.00 EUR
    View details
  • Magpul MS1 Padded Sling Gen2
    Magpul MS1 Padded Sling Gen2

    Product Details

    The MS1 Padded Sling is an optimized, dedicated two-point sling that serves equally well in a one-point role when using optional adapters. Built around our MS1 slider, this system provides rapid adjustments to either lengthen or shorten the sling with no slipping once set, and no tails, loops, or other potential snag hazards. In a two-point role, the MS1 allows easy shoulder transitions, rapid adjustability for hands free rifle carry and shooting support from various positions. The MS1 system also has a series of adapters that are sold separately and based on the MS3® and MS4™ slings. By adding the appropriate adapter (available with Paraclip™ or QD Sling Swivel) for the sling, you can easily add one-point functionality to your MS1.

    FEATURES

    • Dedicated two-point sling with integrated padded section
    • Custom variable-width tubular webbing (1-1/4" to 1-7/8") is strong and wear resistant while remaining anti-chafe for user comfort
    • High-grade, ripstop coated, closed cell foam pad is sewn to the inside of the sling webbing for protection and strength
    • Rapidly adjustable for length (shorter or longer) with new MS1® Slider
    • No tails, loops, or other potential snag hazards
    • Light weight yet durable hardware made of heavy-duty polymer
    • Colored webbing has Near Infrared (NIR) treatment to reduce IR signature
    • Can be configured for two to one-point convertibility with optional adapters


    from85.00 EUR
    View details
  • Magpul MS4Dual QD Sling Gen2 Blk
    Magpul MS4Dual QD Sling Gen2 Blk

    Product Details

    Filling the same mission requirement as the standard MS3 Sling, the MS4 can quickly switch between one-point and two-point configuration. The MS4 maintains material construction and specifications identical to that of the standard MS3, but instead of Magpul Paraclips™ it features two heavy-duty push-button QD Sling Swivels along with a custom steel connection ring to allow one to two-point convertibility. This modification allows compatibility with QD sling cups commonly found on lower receivers, receiver end plates, buttstocks, and many low-profile forward QD Sling Mounts.

     

    The MS4 Dual QD GEN2 incorporates a new low profile quick-adjust Slider which minimizes bulk and allows for secure, yet effortless, sling adjustment. Webbing length has also been increased for a comfortable fit with all body types and armor configurations.

    Made in U.S.A. and 100% Berry Amendment compliant.

    FEATURES

    • Heavy-duty push-button Quick Disconnect Sling Swivels for both one and two-point attachment
    • Compatible with buttstocks, end plates, receivers, and hand guards that have a push-button QD socket
    • Durable, precision-cast steel QD D-Ring allows for quick transition from one to two-point mode and is finished with Melonite for extreme resistance to wear and corrosion
    • Custom 1.25 inch wide nylon webbing material is strong and wear resistant while remaining anti-chaff for user comfort
    • Low-profile adjustment Slider for adding or removing sling tension in two-point mode with a single-hand
    • Colored webbing has Near Infrared (NIR) treatment to reduce IR signature


    from99.00 EUR
    View details
  • LULA Magazine Loader / Unloader M16/AR15
    LULA Magazine Loader / Unloader M16/AR15

    The LULA loader & unloader is a military quality personal magazine loader and unloader. It facilitates both loading of loose rounds into a magazine and unloading them out of the magazine. It does so quickly, safely and comfortably. Usable for tens-of-thousands rounds.  

    Advantages: Both Loads AND Unloads FAST! 35sec to load 30 rd, 5sec unloading 30 rd. Safe on fingers and magazine,  absolutely no sore thumb! Pocket size, just drop on in your range bag! Durable, made of the best quality glass-reinforced polymer Weights approx. 38grams (1.3ounce) Constructed of only two parts ISO9002 manufacturing Chemicals resistant

    Other advantages: A huge time saver when several magazines need to be cleaned (unloaded and reloaded). Needs no dexterity or training to use, suites right and left handed users Needs no maintenance at all. Useable also in zero light environment. Useable with gloves in freezing weather. Loading 1. "Click" the LULA loader over the open end of the magazine; 2. Have the LULA loader and magazine face upwards; and 3. Move the lever to-and-fro as you feed rounds into the magazine.

    Unloading 1. "Click" the LULA loader over the open end of the magazine; 2. Have the LULA loader and magazine face downwards; and 3. Move the lever to-and-fro as the rounds expel out of the magazine.

    That's it !

    from26.95 EUR
    View details
  • StripLULA AR15 Magazine Loader
    StripLULA AR15 Magazine Loader

    This new exciting product from Maglula is the most compact and versatile AR15 loader ever introduced. The StripLula will fit all plastic and metal AR15 magazines, clip onto the top lips and allow you to quickly and effortlessly load your mags.

    It can be used to load ammo packed in stripper clips (12 seconds to load 30 rounds) or it can be used to load individual rounds(40 seconds to load 30 rounds).

    It can even be used as a simply unloader, allowing the unloading of a 30 round magazine in 15 seconds flat.

    If you shoot an AR15 – you’ve to have one of these!

    from29.95 EUR
    View details
  • Maglula Range BenchLoader AR15
    Maglula Range BenchLoader AR15

    The Range BenchLoader™ loaders is a heavy-duty industrial 5.56 / .223 cal magazine loaders made to load a magazine in a single hand stroke. It is intended for daily loading of hundreds of magazines at shooting ranges and armories. It totally eliminates fingers pain and injury, shorten loading time, and keep the magazines lips intact.

    Loads all AR15 / M4 compatible 5.56 / .223 magazines, like:
    - M16 / AR15 / M4 USGI (NATO STANAG 4179)
    - Magpul PMAG
    - SCAR 16
    - H&K metal 416 / SA80
    - SureFire 60 & 100 rd
    - Beretta AR 70-90
    - Lancer *
    - and all others

    from159.00 EUR
    View details
  • DAA AR-15 Racer Pouch
    DAA AR-15 Racer Pouch

    Most AR-15 mag pouches have their roots in tactical or military applications. Not this one! DAA set out to create a totally new competition orientated pouch for the AR-15, and we are very proud of the result, the DAA AR-15 Racer Pouch!

    >span class="s1">Supplied as standard with our Alpha Rail System, the pouch can be adjusted for tilt or exchanged for a pistol pouch or shotshell holder.

    from37.50 EUR
    View details
  • Rifle Bag for AR15-  black
    Rifle Bag for AR15- black

    Rifle Bag for AR15 - 85cm angled top black or 100cm 

    L: 85/100 cm

    H: 28cm

    from39.00 EUR
    View details

Contact Us