Shipping calculator

Sale

All products on Sale

Information

Contact Us

Upper parts

  • ARMANOV Adjustable Gas block for AR15 - Clickable
    ARMANOV Adjustable Gas block for AR15 - Clickable

    Adjustable Gas block for AR15 – Clickable with 4 clicks / rev.

    This gas block is made for standard AR15 barrel diameter 0.750 inch. Port holes are compatible with all standard gas tubes so It can bi installed from pistol length to rifle length.

    from120.00 EUR
    View details
  • NORDIC NC-15-A3 FORGED UPPER AR15
    NORDIC NC-15-A3 FORGED UPPER AR15

    NORDIC COMPONENTS AR1-15 FORGED UPPER RECEIVER- STRIPPED

    from150.00 EUR
    View details
  • NORDIC AR15 BARREL
    NORDIC AR15 BARREL

    Choose between either our 16”and 18'' .223 Wylde or 11.5” 5.56 barrels

    from349.00 EUR
    View details
  • TE MILSPEC CHARGING HANDLE AR15
    TE MILSPEC CHARGING HANDLE AR15

    MILSPEC CHARGING HANDLE AR15

    from25.00 EUR
    View details
  • TE ELITE AR15 LOW PROFILE GAS BLOCK 0.750''
    TE ELITE AR15 LOW PROFILE GAS BLOCK 0.750''

    ELITE AR15 LOW PROFILE GAS BLOCK 0.750'' FIXED OR ADJUSTABLE

    from25.00 EUR
    View details
  • TE AR15 GAS TUBE
    TE AR15 GAS TUBE

    TE AR15 GAS TUBE:

      PISOL LENGHT,

     CARBINE LENGHT,

     MID LENGHT,

     RIFLE LENGHT

    from15.00 EUR
    View details
  • NORDIC M-LOK QUICK DETACH MOUNT
    NORDIC M-LOK QUICK DETACH MOUNT

    Nordic Components, The M-LOK QD Sling Mount Provides a Forward Attachment Point For a Push-Button QD Sling, Machined From Milspec Anodized Aluminum, The Low-Profile M-LOK QD Sling Mount Features Beveled Edges to Reduce Snagging and Has an Anti-Rotation Design That Prevents Swivels From Spinning, All Hardware Necessary for Attachment Directly to M-LOK Slots is Included

    from24.00 EUR
    View details
  • TE AR15 Dust cover assembly
    TE AR15 Dust cover assembly

    TE AR15 Easy instal dust cover assembly

    from19.00 EUR
    View details
  • TE AR15 Forward assist assembly
    TE AR15 Forward assist assembly

    AR15 Forward assist assembly

    from15.00 EUR
    View details
  • TE AR15 Extended latch for charging handle
    TE AR15 Extended latch for charging handle

    AR15 Extended latch for charging handle

    from16.00 EUR
    View details
  • TE AR15 Key mode handguard slim
    TE AR15 Key mode handguard slim



    AR15 Key mode handguard slim 

    from110.00 EUR
    View details
  • TE BOLT CARRIER  M16/M4
    TE BOLT CARRIER M16/M4

    M16 Bolt carrier (w/o bolt)

    from159.00 EUR
    View details
  • Cmmg AR15 Bolt rehab kit
    Cmmg AR15 Bolt rehab kit

    Parts Kit, AR15, Bolt Rehab

    from59.00 EUR
    View details
  • Geissele AR Super Charging Handle (SCH®) 5.56
    Geissele AR Super Charging Handle (SCH®) 5.56

    The Super Charging Handle (SCH®) is 3D machined from a solid block of aircraft grade 7075-T6 aluminum. Its ambidextrous design allows for seamless operation from either side of the weapon.

    SUPER CHARGING HANDLE (SCH®) 5.56

    The Super Charging Handle (SCH®) is 3D machined from a solid block of aircraft grade 7075-T6 aluminum. Its ambidextrous design allows for seamless operation from either side of the weapon. The levers are dual contoured similar to that of the charging handle of an M14, where not only the x-axis but also the y-axis receive radius cuts. The handling surface of the lever is also checkered, adding a textured grip aiding to the use when operating with gloves. The heightened rear lip of the SCH aids in mitigating gas blow back to the shooter when shooting with short barreled and suppressed weapon systems. All parts are then Type 3 Hardcoat anodized and are available in black 


    from149.00 EUR
    View details
  • GG&G - 45 Degree Offset mount
    GG&G - 45 Degree Offset mount

    45 DEGREE OFFSET MOUNT - ACCESSORY RAIL:

    • Allows for small micro red-dot optics, including the Trijicon RMR if equipped with the rail adapter, to be attatched to a 45 degree offset mount for close range engagements.
    • Ambidextrous by design for right and left hand shooters.
    • The Offset Accessory Rail can also be installed on tactical forearms to mount flashlights and lasers.
    • Mounts to a MIL-STD 1913 dovetail rail.
    • It is manufactured with 5 cross-slot mounting locations to accommodate most micro red-dot optics.
    • Manufactured to MIL-STD-1913 specifications and will accept accessories with a Weaver or MIL-STD 1913 interface.
    • The 45 Degree Offset Accessory Rail is manufactured with an enclosed recessed sidebar with a full one inch of dovetail engagement for secure mounting.
    • Counter sunk locking cross bolt helps eliminate the possibility of snags.
    • The geometry of this low profile offset mount allows for Zero Cheek-weld shift while transitioning between primary and secondary offset optics.
    • The 45 Degree Offset Mount Accessory Rail is 2.5 inches long but only uses one inch of top rail for mounting.
    • Lightweight at only 1.45 oz.
    • Manufactured from billet 6061 T-6 aluminum.Type III hard coat anodized in a non-reflective combat finish to meet mil-spec.
    • Fully deburred for the shooters safety.
    • Warranty: Lifetime.
    from62.00 EUR
    View details
  • JP Enhanced Gas Ring 223
    JP Enhanced Gas Ring 223

    JP .223 Enhanced Gas Rings

    As a replacement for traditional three-piece gas rings, the JPEGR-223 utilizes a one-piece design similar to the McFarland rings. Unlike the McFarland rings, though, our precision-ground gas rings are engineered to precisely suit small-frame carrier group components such as our own JP EnhancedBolt™.

    After testing numerous minute grind callouts, the final JP Enhanced Gas Rings spec is the perfect balance of a solid gas seal with a very low-friction relationship between rings and bolt carrier. Reducing the resistance between these components directly results in an overall increase in the rifle's operational window while the edge of the rings utilizes the cycling action itself to scrape the walls of the carrier, helping shed fouling with every shot.

    from19.00 EUR
    View details
  • AR15 Bolt kit
    from125.00 EUR
    View details
  • DBST AR Bolt rebuild kit
    DBST AR Bolt rebuild kit

    The bolt rebuild kit provides everything you need to rebuild your AR15 bolt.

    The kit includes:

    Extractor
    Extractor Spring with Bumper Pad
    set of 3 Gas Rings
    O Ring
    Extractor Pin
    from40.00 EUR
    View details
  • KAC Top Rail Rubber thumb rest
    KAC Top Rail Rubber thumb rest

    Knights Armament Company, Top Rail Rubber Thumb Rest, Fits Picatinny, Black Finish

    from35.00 EUR
    View details
  • KNS AR15 Post Sight pack
    KNS AR15 Post Sight pack

    KNS Precision, Inc., Sight Pak, Fits AR-15/M16, Black Replacement Front Sight Posts - 3 square posts-(.034,.052,.072), 3 round dot posts- (.034,.052,.072), 1 V-notch and Inverted

    from49.00 EUR
    View details
  • SEEKINS DNA AR Charging Handle
    SEEKINS DNA AR Charging Handle

    he Seekins Precision DNA Charging Handle offers a full body and textured grip surface to improve user controls. Our team set out to create a product that would not only offer ergonomic fit and function, but also aesthetic design. Crafted in a climate controlled laboratory by a team of scientists who were only allowed to use their right hands, we can proudly say the DNA handle is the most non-ambidextrous charging handle in our product line up. Really, it's just a charging handle, a very non-ambidextrous one. Enjoy!

    from99.00 EUR
    View details
  • YHM Slant Brake- Compensator 9mm 1/2-36TPI
    YHM Slant Brake- Compensator 9mm 1/2-36TPI

    PRODUCT FEATURES

    This 9mm Muzzle Brake and Compensator hybrid is designed to reduce recoil as well as muzzle rise for a quicker follow up shot.  It is also available in a 5.56mm, and a .30 Cal.

    SPECIFICATIONS

    • Made from quality heat treated steel
    • Plated with Melonite QPQ (Matte Black Finish)
    • Threaded  1/2"-36
    • Rated for 9mm, 7.62x39mm
    from110.00 EUR
    View details

Contact Us