How to order the correct number of links:

1. Wear your current inner belt (if you don’t have one - use any thin belt).
2. Use a flexible tape-measure (or string) to measure your waist circumference on top of the inner belt.
3. Check size cart bellow to see how many you need
4. Select your links in any color combination.

You need an inner belt to use the Lynx system. If you don't have one, don't forget to order.

link to Inner belt

Part of what makes the Lynx belt so special is that it is made of individual links. This allows you to customize your belt, designing a one of a kind color scheme, choosing links of the 9 available colors. Design your belt to represent your National Flag, your shooting club or match your shooting uniform.

Here you can purchase individual links of any color and quantity, should you need to do so. 

Dimensions: links are 33mm long from pin to pin. 38.7mm tall, thickness on the Velcro pad is 8.8mm, 7mm off the pad

DAA IPSC Scoring Overlay Gauge is made of sturdy 0.75mm thick hard transparent plastic, these overlay gauges are a “must have item” in every range bag! 
They are the size of standard credit cards and so fit easily into any wallet or pocket. 
Include precisely drawn caliber circles and a handy 50mm side ruler for measuring gear’s distance from the body.

Handy little steel punch tool, designed to make removing the rolls pins quick and easy. Should you need to remove a link, or wish to insert another, removing the roll pin can be difficult without a punch tool. With this little tool, the task is easy, and being compact and lightweight lets you leave it in your range bag tool kit.

DAA Replacement Foam Inserts (2pcs) of precut replacement foam pads for most earmuffs. Tested to be a perfect fit in Sordins and Peltor models, these should work equally well in pretty much any ear protection earmuffs.

Replace those old dirty, smelly foam pieces with a new fresh set at minimum cost. These foam inserts are pocketed on the back side to allow space for speaker units as used in electronic sets. The dense foam offers excellent sound damping and the black colored surface treatment increases durability of the foam pads.

Laser cut plastic logo inlays for the Alpha-X holster body and hanger. These inlays have 3M tape on their back for easy installation on the holster assembly.

Laser cut plastic logo inlays for the Alpha-X holster body and hanger. These inlays have 3M tape on their back for easy installation on the holster assembly.

Note that it is possible to remove the color inlays and swap them for a new color when desired. However, the old color inlay may break when removed.

Laser cut plastic logo inlays for the Flex holster body. These inlays have 3M tape on their back for easy installation. Note that they also have a transparent protective film stuck on the color side – you may want to peal that off for best appearance.
It is possible to remove the color inlays and swap them for a new color when desired. However, the old color inlay may break when being removed. 

Inlays for left and right hand are different.

A set of 4 fiber reinforced hard-nylon hooks, perfect for reaching into those hard-to-get-to corners and indents in your firearms, for cleaning and maintenance.

The plastic material used ensures that there is no risk of scratching or damaging your valuable firearm parts as you work on it. The assortment of end tips and shapes provides you with options to find the best form for the job at hand.

Packed in a plastic sleeve, with a cardboard header, suitable for display hanging.

The Lynx Belt Half Link Extension Piece is a solution to requests received by some shooters using the unique DAA Lynx belts, wanting to be able to extend the length of their belt by half a link’s length only.

A silicone cloth is one of the most useful items to have in your range bag. It has multiple applications for IPSC shooters: 

First and foremost it can be used to improve the feeding reliability of your magazines. Many top US shooters run their bullets through the silicone rag before loading the ammo into the magazine. When slightly coated with silicone, the bullets roll better in the magazines, and magazine feeding problems are eliminated. You can also run the silicone cloth through your mag tube when cleaning. 

Use the cloth to wipe down the outside of your gun and magazines to prevent rust and remove finger marks. 

The silicone cloths come packed in individual zip bags which prevent the rag from drying out. 

Only 4 Euro each, or take advantage of our promotional price - and order a pack of 5 for the price of 4 (see Combo: Silicone Cloth 5 Pack).

The 11-Coil (125-140mm mags) DAA 2011 magazine springs are made from hi-quality spring wire, and carefully formed and manufactured to maximize reliability, capacity and longevity.

When buying Lynx belt a set of 50 roll pins is included, but if should you require more than that – you can purchase another bag of 50- Roll pins separately.

Some Mr.BulletFeeder users have asked for the option to extend the output feed spring, to allow them to position the collator further away, or perhaps position one collator between two presses and use it to alternately feed each machine.

To meet this request we are pleased to offer the output springs and a screw-on adaptor cap which will allow you to attach to your current spring and extend it up to another 38cm.

 Two sizes are available. The Small (10mm inner diameter) matches the springs used with the rifle caliber machines and the large size (12mm inner diameter) as shipped with the pistol calibers.

 Note that some “do it yourself” supports for the spring will be needed to prevent it sagging under the weight of the bullets. You do need to keep the tube running downwards and prevent bullets from “pooling” in a sagging loop.

Some Mr.BulletFeeder users have asked for the option to extend the output feed spring, to allow them to position the collator further away, or perhaps position one collator between two presses and use it to alternately feed each machine.

To meet this request we are pleased to offer the output springs and a screw-on adaptor cap which will allow you to attach to your current spring and extend it up to another 38cm.

 Two sizes are available. The Small (10mm inner diameter) matches the springs used with the rifle caliber machinesand the large size (12mm inner diameter) as shipped with the pistol calibers.

 Note that some “do it yourself” supports for the spring will be needed to prevent it sagging under the weight of the bullets. You do need to keep the tube running downwards and prevent bullets from “pooling” in a sagging loop.

We are pleased to offer the IDPA Magazine Belt attachment separately too, as an accessory to be used with other pouches of your choosing.

This attachment is made of PA66 Nylon with 30% glass fiber, making it extremely tough and durable. It can be used to attach the gear of your choice to any belt, with a thickness up to 8mm and a width of 1.5”-2.25” (39mm-57mm). The hanger includes a set of six spacers which allow you to quickly and easily adjust the width of the mounting slots to suite your belt.

The hanger includes the M5 mounting screw and our unique DAA serrated adaptor plate, which clicks into many DAA products, including our Racer pouches, most of our magnetic pouches, AR15 pouch quad loaders and more. But we also include a larger rubber washer which can be used to attach a Race Master pouch body to this hanger by placing the rubber washer between the hanger and pouch body instead of the serrated washer.

Please note: These IDPA pouches are designed to be used on IDPA legal leather belts, not on Velcro inner/outer belt systems as used in IPSC, which are not legal for IDPA use. It is very difficult to install these pouches onto our Premium belt, as they are not designed for use on that belt. It is not a recommended combination.

Available in Black only

Uplula, divice to load and unload your magazines. Easy and quick loading and unloading. The UpLULA loader is a military quality personal universal pistol magazine loader. Easy and quick loading. Rounds just drop in with no fingers pushing or forcing the rounds.
Up to one round per sec. loading rate, with some practice.
Fits in your hand and pocket, weighs only 66 grams (2.3 Ounce).
Highly durable - constructed of the best reinforced polymer.
No more strain or pain when loading those mags!

A Primer Flip Tray is a “must have” item for most reloaders.

There are many on the market to choose from but here at DAA, we strive to design things better, and we believe we have succeed with our DAA Primer Flip Tray.

The DAA Primer Flip Tray is made larger than most, and square in shape, to make it easier to empty a box of primers onto the tray. Even the very large box of the popular Federal primers easily fits within the footprint of our tray.

Much experimentation and finetuning was done on the serrations to make the tray as efficient and fast to use as possible. Just a few shakes of the wrist will flip all your primers Anvil side up.

The tray is made from a tough translucent plastic material, making it possible to see the primers through the tray as you flip it over. Enabling you to keep the primers well spread out for easy pickup.

But the most unique and innovative feature of our primer tray, solves an irritating issue well known to all primer flip tray uses!

Other Primer Flip Trays all have a sharp cornered side-wall on their lids. Because of this, when primers are close up against the side-wall they are very difficult to pick up. This forces uses to shuffle the tray to move the primers away from the wall.

However, the lid of the DAA Primer Flip Tray has a side-wall which is a 45 degree angled slope. This allows you to easily pick up the primers even when they are tight up against the side wall of the lid, saving you valuable time as you fill your primer tubes.

Since we introduced our DAA Turbo Case-Feeder Plate for the Dillon case feeders, we’ve had Mark-7 customers asking us if they could use it with their High Speed 11” Mark7 case feeder (as supplied with the Apex-10 press). The answer is YES! The disk is the same size and it works great in the excellent Mark-7 case feeder. 

Simply the fastest and most convenient way to clean your gun barrel, be it a pistol, a rifle or a shotgun. Simply drop the weighted end down the barrel, from breach to muzzle and pull through. Do so with or without solvent, as best suites you needs. One pull runs a copper bristle brush as well as a wide long swab down the length of your barrel. You do not even have to disassemble the weapon to clean! Can be complete in seconds, and your barrel will be ready for another session on the range or in the field. 
 

The DAA Dislodge-Wedge is designed to be much larger and longer than the original Dillon part, reaching down to the very base of the plate, and providing a more gradual, angled surface to clear stacked cases as the disc rotates, at any speed.

The DAA Magnet Cover is a practical and super-attractive addition to your Rig!

Designed to perfectly fit on the DAA 48mm large magnets, this cover is custom made from durable nylon, rubber coated, and incorporates a laser-cut stainless-steel (430) DAA Logo.

The logo itself is what firmly holds the cover in place – being made of magnetic stainless-steel, and thus attracted to the magnet.

Most serious shooters carry one of these large magnets on their belts, as they are real time savers on pick-up stages. But let’s face is – those magnets can be a pain, picking up steel debris sticking to your car interior or those metal storage cupboards. 

Not anymore! 

This cover does not completely eliminate the magnetic pull, but it greatly reduces it to where it’s no longer an issue.

The magnetic pull through the cover is still just strong enough to hold a magazine during a Load or Unload procedure, but not strong enough to be trustworthy when running.

So leave the cover on until that stage in which you need your pick-up magnet, at which time you simply pop the cover off before the stage, and drop it in your pocket until after you’re done.

 Fast, simple, practical and very striking in appearance!

 * Magazine Pouch not included

Many PCC shooters use extended Glock Magazines, often with long base pads added for even more capacity.

To ensure the best possible retention in our Racer and Race Master mag pouches, we are pleased to offer this dedicated extended Glock Side spacer.

Simply assemble this spacer instead of your short one, and allow the bottom of your long mag to extend out the bottom of the pouch body, for a more balanced more secure retention.

The long spacer offers three hole positions in which to place the stopper, giving you the ability to experiment and decide for yourself what the best depth for your magazine is.

NOTE:  this spacer is not compatible with the Alpha-X line of pouches. Magazine and Magazine Pouch not inlucded!

As any reloader knows, adjusting a die on a tightly spaced tool head can be difficult and aggravating. The die nuts and various machine parts do not allow easy access and using regular wrenches can be near impossible. The DAA 1 Inch Box-End Wrench is the solution to this problem! The custom made, laser cut, stainless steel wrench is strong enough to last a lifetime and thin-walled enough to fit between any dies for easy access and adjustment.

As most serious IPSC and USPSA pistol shooters know, preventing slip in your grip is of utmost important for high-speed accurate shooting. A grip-enhancement lotion is one of the best ways to achieve that anti-slip, without the need to apply excessive force to the grip. Especially in wet conditions or in extreme heat, sweating palms can really hurt your performance. But with a few drops of the new GRIPZ by DAA, applied just before you shoot, your palms remain dry and your grip secure.

GRIPZ by DAA is a grip enhancer designed by shooters for Shooters. Supplied in a plastic bottle with a practical “Snap-cap” type closure, that ensures a good seal and quick, easy, one-handed access when needed. GRIPZ by Double Alpha does not dry as white in color as other competing products, and will not rub off as easily onto your clothing and pistol grip. It will be cleaner to use than other leading grip-enhancers popular in our sport.

GRIPZ is silica based grip-lotion, diluted with alcohol and stabilizers for the ultimate performance and longevity. Each bottle holds 75ml (some 20% more than competing products).

A cool, new, practical way to carry your Grip-Enhancer into action!

Many shooters like to carry their Grip Enhancer of choice on their belts, so they can apply it just before the “Load and make ready” command. And what is needed is a quick and secure carrying solution, which allows you fast access to the Grip Enhancer and a quick return to belt retention. The New DAA Magnetic Grip-Enhancer does just that – and in style!

Two super-strong magnets are fitted into the custom-made silicone belt and bottle attachments, clicking together and locking securely in place. Run, jump or spin – you wont accidentaly dislodge this holder. Yet a moderate tug/rotation motion and it will come away in your hand for quick application.

The DAA Magnetic Grip-Enhancer Holder is a perfect fit for a bottle of Progrip or for the new DAA GRIPZ lotion. (Any bottle of approx. 34-36mm in diameter could be held securely.)

Available in Black, Blue or Red colors.

The DAA CED7000 EVA Case offers a custom-made solution to store and/or carry your CED7000 timer at the range or in your range bag. The case is constructed of sturdy, velvet-lined EVA, with a high quality zipper tracking around 3 sides.

A replacement threaded die body for your Mr.Bulletfeeder by DAA Dropper. This threaded body is compatible with all calibers.

DAA Premium Belts are sold as a set, including both the outer and inner belts. However, as most shooters know, an extra inner belt is a handy piece of kit. These inner belts are extremely practical for everyday use and perfect for air travel, as they include no metal and no buckle. Sold separately in Black only, in sizes from 28”-50”.

Note: The "Double Alpha Academy" font color on the inner belt is silver.

The Wide 2" Belt Hanger for Alpha-X Pouches, is a complete fully-assembled belt hanger for the Alpha-X pouches – enabling the user to attach these pouches to a wider belt. The wide bracket and included spacers will accommodate up to a 2” wide belt, and the two ¼” spacers make it easy to use on a 1.75” belt or a 1.5” belt as well.

The hanger is complete, including the steel bracket on the back with the two removeable spacers, and the ball joint for attachment to the Alpha-X pouch body.

Pouch body and pouch-spacers are not included.

The DAA Dust Cover is made of durable long-lasting polyester 600D and features a slick “no-snag” lining to ensure easy-on-easy-off usage.

The double layer material and thin padding offer good protection to your valuable firearm without becoming too bulky or taking up too much space in your range bag. The material flaps beneath the sturdy zipper ensure that neither dust nor rain get onto your gun.

Each pistol cover includes a handy transparent ID pocket for placing a business card or competitor's badge to ensure that you and your dust cover can be reunited if separated on the range.


Available for right-hand shooters only and Standard (for Standard and Production guns).

The DAA Case Lube is a result of much testing and experimentation to find the best performing formula. The non-aerosol spray-cap bottle is easy and efficient to use. 

The Alpha-X holster by Double-Alpha has taken the shooting world by storm, fast becoming the choice of top shooters worldwide. And while the reviews and feedback have been overwhelmingly positive, we have had a few requests for a Thigh Pad option to be made available for this holster.

Some shooters prefer to have a muzzle support on their competition holster. This is an indisputable fact.

While most users will find that the Race Master holster functions perfectly without the additional muzzle support, there are some added advantages to using this extension: The muzzle support prevents the gun from being dislodged upwards, which could happen if bumped on the shooters thigh, or against a prop, during a walkthrough. If the holster was left unlocked, the gun can be dislodged. The muzzle support prevents this from happening.

The DAA Powder-Spill-Prevention (PSP) Brush is a simple yet efficient reloading accessory that solves a real issue: How to prevent small amounts of powder being spilled out of the case, as the tool head of the progressive reloading press indexes?

The DAA Powder-Spill-Prevention (PSP) Brush is a simple yet efficient reloading accessory that solves a real issue: How to prevent small amounts of powder being spilled out of the case, as the tool head of the progressive reloading press indexes?

Dry-firing is one of the most effective methods to improve you shooting skills. It is cheap – no ammo is required. It is convenient – you can do it in the comfort of your home (don’t let the neighbors see you…). And it is an excellent way to build subconscious skills without the distractions creates by target feedback – good or bad hits. But in order to make your dry-fire practice as productive as possible, it needs to be as realistic as possible. You need to use YOUR gear, your holster and gun, and you need to make sure that you do GOOD practice only. Which means pulling the trigger only when the sight picture is correct!

- IPSC: This DAA Dry-Fire Target Set consists of 20(!) precisely scaled down IPSC Classic targets. When placed on a wall at a distance of 2.5-3 meters, they will serve to simulate targets at distances of 15, 20 and 30 meters.

- USPSA: This DAA Dry-Fire Target Set consists of 17(!) precisely scaled down USPSA Metric targets. When placed on a wall at a distance of 2.5-3 meters, they will serve to simulate targets at distances of 15, 20 and 30 meters.

A must-have item on every worktable or reloading bench! The DAA Silicon Work Mat is made larger than most, measuring an impressive 50 x 32 cm (20 x 12.5 inch).

Due to popular demand we are now pleased to offer you the DAA Super-Strong magnets, sold separately, for mounting on the DAA Alpha-X / Race Master pouches, or any other type of base you care to use them on.

These Zinc plated magnets are incredibly strong, offering approx. 87kg of pull strength. With these magnets, you can slap on that magazine quickly and confidently and know that it will not fall off as you move. The magnets measure almost 50mm in diameter, and are 12mm thick (with their casing).

Fitting to an Alpha-X / Race Master Pouch:
In the front of the pouch there is a 4.2mm hole, which can be used to attach the magnet to the pouch body. You will need to tap (thread) this hole using an M5 Tap. Do it carefully and slowly as the thread needs to be precise, as there is only a 2.5mm side wall to work with. once done, simply screw the magnet directly onto the front of your leading pouch. We suggest using a little LockTite on it, to keep the screw from opening.

Do not worry if the tip of the screw protrudes slightly into the pouch body - the magazine does not reach down far enough to hit it.

The DAA Dry-Fire Practice Magazine is designed to emulate as closely as possible the feel and performance of a fully loader real magazine. It allows you to dry-fire without introducing dummy loaded rounds to weigh down real magazines, which can be risky, and saves wear on your real mags.

A set of two loaders for loading .22LR cal. single-stack wider mags with a projecting side-button, such as:

• Walther P22 / G22 / PPQ
• Ruger SR22
• *COLT 1911 .22
• S&W M&P .22 compact
• *S&W M&P .22 10rd & 12rd
• Walther PPK/S .22 (only the T12-LULA™)

he DAA Output Chute can be attached to any reloading press, hanging onto the same bracket which usually holds the Akro-Bin, and replacing it.

The long, 120cm (4ft) feed spring enables you to run the ammo down to a container on the floor, sparing you the need to empty that bin as you reload, and uncluttering your reloading press.

Double head with brass, nylon, rubber and steel heads.

Custom designed for range use, this value packed double-head hammer will cover all your pistol repair needs. The hammer’s compact and light weight size make it an ideal handy addition to any range bag or work bench.

The DAA Elbow pads are specifically designed to meet the needs of IPSC/IDPA shooters on the range. What is needed is a lightweight yet durable pad which offers the required protection when going prone, without adding bulk and without compromising the shooting position or making it less comfortable. The DAA Elbow pads deliver just that! 

The pads themselves are made of high density EVA foam, which offers longer life and better protection. The pads are in the form of small circular disks, which are tightly held together to offer seamless protection, while providing full flexibility and comfort of wear. The sleeves are made of 90% Polyester and 10% Spandex, to offer comfort and excellent fit. They are machine washable. Silicon piping is incorporated at the top and bottom edges of the sleeve, to ensure the elbow protection does not slide up or down while you shoot and move. 

Included is a set of two pads, black, with DAA logo.
Available in two sizes, to fit most.
Sizing note: choose M-L if you normally wear a Medium or Large top or choose XL-XXL if your shirt size is XL/XXL or larger.

The DAA Single Pistol Case offers a compact and affective storing and transport solution for one full size pistol. The EVA carbon-fiber-finish outer shell offers protection and durability, while the velvet-lined foam padding holds your pistol securely in place. The inner dimensions are large enough to accommodate any Production, Standard or Carry Optics pistol we tested with. However, it will be too small for a full-size Open Pistol.

Lets you hear what you need to hear. Protects you from what you don't. 

Enter the ZemZone where loud damaging noise is suppressed yet you can hear the conversation of others around you. You will improve your concentration, be more productive and feel better at the end of the day. The ZemZone. It's the safe sound world for your ears.  A quiet revolution at work, at play, at home Improved Performance 

• High noise reduction across all frequencies
• No distortion of sound
• Blocks harmful noise but allows speech and other useful sounds to be heard

Greater Comfort

• Lightweight (less than 2 ounces)
• Adjustable head band
• Comfortable for extended use

Increased Safety

• High speech intelligibility
• Hear shouts or warning signals
• No need to remove hearing protection to have a conversation

Convenient

• Folds for easy storage in shirt pocket      or
• Drop around the neck while not in use

Double the capacity of your Dillon powder hopper with this clear PT extended Hopper. The Hopper measures 36cm long and replaces the 18cm long Dillon Original.

It assembles in the same way, using the two screws in place on the Dillon.

>span class="s1">An acrylic powder baffle is included with the extended hopper.

1050 users, please note: this hopper it too long to fit under the case feeder on your 1050. You will need to shorten it to fit. The tube can be shortened using a saw or serrated knife. About 9cm need to be cut off to fit under the 1050 case feeder.

A set of two loaders for loading .22LR cal. single-stack narrow mags with a projecting side-button, such as:

• Ruger MK I, II, III, 22/45
• Browning BuckMark
• Beretta U22 NEOS
• COLT Woodsman/Cadet
• High-Standard .22
• S&W 22A/22S (only X10-LULA™ will load well)

The DAA Dry-Fire Swinger Target allows you to enrich you dry-fire experience adding a swinger – one of the least practiced targets, and one which many find challenging.

DAA XL650/750 Debris-Out Casefeeder Adaptor, which replaces the original Dillon case feeder adaptor on your press, the slots cut in the pipe allow the debris to fall out the sides onto the small collection tray and the chances of a jam-up are greatly reduced.

The LULA loader & unloader is a military quality personal magazine loader and unloader. It facilitates both loading of loose rounds into a magazine and unloading them out of the magazine. It does so quickly, safely and comfortably. Usable for tens-of-thousands rounds.  

Advantages: Both Loads AND Unloads FAST! 35sec to load 30 rd, 5sec unloading 30 rd. Safe on fingers and magazine,  absolutely no sore thumb! Pocket size, just drop on in your range bag! Durable, made of the best quality glass-reinforced polymer Weights approx. 38grams (1.3ounce) Constructed of only two parts ISO9002 manufacturing Chemicals resistant

Other advantages: A huge time saver when several magazines need to be cleaned (unloaded and reloaded). Needs no dexterity or training to use, suites right and left handed users Needs no maintenance at all. Useable also in zero light environment. Useable with gloves in freezing weather. Loading 1. "Click" the LULA loader over the open end of the magazine; 2. Have the LULA loader and magazine face upwards; and 3. Move the lever to-and-fro as you feed rounds into the magazine.

Unloading 1. "Click" the LULA loader over the open end of the magazine; 2. Have the LULA loader and magazine face downwards; and 3. Move the lever to-and-fro as the rounds expel out of the magazine.

That's it !

The DAA Single Stack Magnetic Pouch is our latest magnetic pouch design, offering an ultra-compact and ultra-efficient magazine holding system for single stack shooters.

It positions the magazine only in the 90 deg “away from the body position” and is an excellent option for shooters who choose to carry their magazines this way, as many single stack shooters do.

The DAA Single Stack Magnetic Pouch utilizes two small yet powerful magnets that hold the magazine firmly in place while allowing it to rest inside its supporting track. The track guides the magazine in and out of the pouch and prevents it from accidentally being dislodged. The release achieved from this magnetic pouch is the smoothest of any of our magnetic pouches, partly due to the smaller contact area with the single stack magazines.

The belt hanger is the same as that used in the Racer pouches - the same minimalist steel plate design which eliminates separation between your inner and outer belt. The pouch can be adjusted for tilt in very small steps, allowing you to find your preferred angle. Once the correct angle is set and the center screw tightened, the serrations in the connector piece lock up, preventing any possibility of the pouch rotating until the center screw is loosened several turns.

A common question we hear is “Can I use the Bullet Feeder on my 550?” Or “Can I use the Bullet Feeder and still continue to use my powder check on my 650?”.

Such Seating and Crimping dies are available, and so we decided it was time we made them directly available to our customers as well. LEE Precision produces these, so no question about the quality. 

The 2-in-1 Seating and crimping die include an O-ring lock machined into the nut, which allows you to hand tighten only – and the die stays put! They include a finger adjustable floating bullet seater. For durability they are heat treated to ideal hardness and polished to the smoothest finish.

The DAA Bullet Puller is a must-have for serious reloaders. This tool takes all the hassle out of separating your used cases from the bullet and powder. The tool itself is formed from high-quality plastic with an aluminum rod to ensure many years of durable performance.

The DAA Bullet Puller can be used for ammunition of all sizes ranging from .17 Remington to .50/70 Government cases. This tool comes with an extra set of three collets, should the originals happen to break. The tool itself is virtually indestructible and makes quick work of disassembling your ammunition for reloading.

Building on the success of the Magnetic Single Stack Pouch, we are pleased to offer the same configuration in two new models, a 2011 wide body and a CZ/TAN double-stack magazine size.

(Note that the wider CZ TS mags should select the 2011 model!)

Two 20 mm-round magnets hold the magazine firmly inside the  pouch track, allowing for secure retention and yet enabling a smooth and effective magazine release. The base on the pouch is the same as used in the Racer line, providing for two height positions and a step rotation adjustment. The thin steel plate at the back of the belt-hanger minimizes separation between the inner and outer belt. Perfect for these pouches, which are often mounted close together on the outer shooting belt. This pouch configuration is ideal when wanting to mount pouches close together and allow easy access to multiple magazines without having to reach too far back.

Available in Black only.

EP7 Sonic Defenders Ultra protect your hearing without interfering with your ability to hear routine sounds or conversations. Their foam-tipped stem design, featuring soft memory-foam Comply™ Canal Tips, fits most people and provides a Noise Reduction Rating (NRR) of 28dB. Sounds, at safe levels, are allowed to pass through into the ear canal, while potentially harmful noises (above 85dB) are reduced via a proprietary design that incorporates a special noise-reducing filter. EP7s include attached filter caps, which can be inserted for additional protection and blocking out lower-level noise, like that heard on a plane, in situations where hearing ambient sounds or conversations isn't critical. Right/left color-coded Sonic Defenders Ultra are made from a soft but durable, hypoallergenic polymer that provides all-day comfort and an extended product life (up to 6+ months, depending on usage and care). Their patented EarLock® retention rings lock the earplugs in place, while soft foam-tipped stems provide secure seals in the ear canals. And their low-profile design means they can be worn while wearing a helmet or mask, or while using a phone or headset.

Comfortable EP7 Sonic Defenders Ultra also serve as earpieces for compatible radio communication systems* simply by removing the noise-reducing filter and attaching the earpiece to the system. NOTE: EP7 earpiece will not provide hearing protection if the noise-reducing filter is removed.

EP7s are available in small (S), medium (M), and large (L) - NOTE, WE ONLY STOCK MEDIUM. Proper size is based on the dimensions of your ear's concha bowl. Size "medium" fits most people;

EP7 Sonic Defenders Ultra are sold as a single left/right set or in a box containing 25 sets. Each set is packaged in a convenient carry case and includes a polymer lanyard and an extra set of memory foam Comply™ Canal Tips;

Features
- 28dB Noise Reduction Rating (NRR) with filter caps inserted
- Lowers potentially dangerous noise levels above 85dB
- Hear safe sound levels (with filter caps out) as if you weren't wearing ear plugs
- Patented EarLock® retention rings utilize seven contact points to lock earpieces in place and fit the same way every time
- Soft memory-foam Canal™ Comply Tips provide secure seals in ear canals and all-day comfort
- Made from hypoallergenic, medical-grade polymer that's soft, comfortable, and durable
- Low-profile design allows you to keep them in place while wearing a mask, helmet, hat, or while using phone, headphones, or supplemental hearing muffs
- Serve as earpieces for compatible* radio communication systems
- 26" polymer lanyard included
- Additional pair of Comply™ Canal tips included

The 2018 Hanger Assembly for the Mr.Bulletfeeder by DAA ships as standard with all new units leaving DAA as of Jan 2018.

Should you wish to upgrade your current hanger assembly (the one with the round Delrin pucks and aluminum rods) you can do so by purchasing this new hanger separately. It is reverse-compatible with all previous Mr.Bulletfeeder by DAA units.

The new hanger is a simplified design, which makes assembly and adjustments to the tilt angle easier and faster to make. The Horizontal aluminum bracket clamps directly onto the motor gear box, allowing for easy assembly on either the left or the right side of the collator, to accommodate your specific position mounting needs.

The vertical piece hangs over the side of your case feeder, and connects to the horizontal bracket by means of a large M8 bolt, which can be loosened and rotated for tilt adjustments.

Sturdy attachment to the collator, a simplified design with fewer parts, thick aluminum profiles and way fewer screws make this hanger simpler and easier to setup and adjust.

Note: Machine NOT included - only Hanger. 

The unique retention system that all DAA pouches utilize has made the Racer Pouch a very popular choice for competition shooters worldwide. However, to make it suitable for IDPA use, some changes and new features were required.

The IDPA Racer Pouch utilizes the same tested and proven Racer Pouch body on an entirely new hanger that allows the slide-onto-belt functionality required for IDPA competitors. The hanger is designed to position the pouch closer to the body, making it suitable for IDPA, but also with an eye to the carry and self-defense markets.

The thumb-adjustable wheel is removed to meet the IDPA rules. Tension adjustment is still possible by means of a pressure screw that can be turned with a hex key, accessed from the back of the pouch body.

The IDPA Racer Hanger is ideal for threading onto medium to thick belts with a width ranging from 1.5” to 2.25” (39 mm to 57 mm), using a set of included click-in spacers. For each belt width use the appropriate spacers to get a solid and secure fit. Interchangeable pouch inserts allow you to go from larger 2011 mags to smaller CZ/Tan mags. A third pressure spacer is included for Glock and M&P mags. A single stack spacer is also available as an accessory.

Please note: These IDPA pouches are designed to be used on IDPA legal leather belts, not on Velcro inner/outer belt systems as used in IPSC, which are not legal for IDPA use. It is very difficult to install these pouches onto our Premium belt, as they are not designed for use on that belt. It is not a recommended combination.

This new exciting product from Maglula is the most compact and versatile AR15 loader ever introduced. The StripLula will fit all plastic and metal AR15 magazines, clip onto the top lips and allow you to quickly and effortlessly load your mags.

It can be used to load ammo packed in stripper clips (12 seconds to load 30 rounds) or it can be used to load individual rounds(40 seconds to load 30 rounds).

It can even be used as a simply unloader, allowing the unloading of a 30 round magazine in 15 seconds flat.

If you shoot an AR15 – you’ve to have one of these!