* This is a blank Alpha-X holster aseembly only. If you require it with an insert, go the to full holster product page.

Conversion kits are available allowing you to use your Mr. Bulletfeeder by Double-Alpha for more than just one caliber. Many reloaders have a second complete tool head for their 2nd caliber of choice, voiding the need to reset the dies. To make the transition easy, the Mr. Bulletfeeder by Double-Alpha conversion kits includes a complete dropper assembly, a custom powder funnel (for pistol calibers) and a new collator plate for the caliber of choice. This will allow you to switch your bullet feeder from one caliber to the next in a matter of minutes. 

The Range BenchLoader™ loaders is a heavy-duty industrial 5.56 / .223 cal magazine loaders made to load a magazine in a single hand stroke. It is intended for daily loading of hundreds of magazines at shooting ranges and armories. It totally eliminates fingers pain and injury, shorten loading time, and keep the magazines lips intact.

Loads all AR15 / M4 compatible 5.56 / .223 magazines, like:
- M16 / AR15 / M4 USGI (NATO STANAG 4179)
- Magpul PMAG
- SCAR 16
- H&K metal 416 / SA80
- SureFire 60 & 100 rd
- Beretta AR 70-90
- Lancer *
- and all others

The Mini Mr.Bulletfeeder by DAA uses a 6-tube magazine system which holds roughly 100 bullets. It feeds into the same brilliantly reliable dropper die assembly as used on the Mr.Bulletfeeder.

Warren Tactical Series sight design is void of sharp corners, serrations, undercuts, and odd angles because they are distracting!

The patented, curved rear profile, called the "Waive Design" and the radius corners of the rear notch combine to quickly direct the shooter's vision upward toward the front sight and the target / threat.

The Waive Design also allows faster "target to target" transitions. Plus, with the long outer corners of the rear sight removed, the shooter can see more of the target / threat area clearly. Front sight height: 5.5mm (0.215”) Front sight width: 3.2mm (0.125”)

CED has taken the BEST Range Bag on the market today to an entirely new level of design and function! The result is the new CED Deluxe Professional Range Bag! 

The DAA 1911/2011 Ambidextrous Safeties with Shields are precision-made stainless-steel Safeties made with state-of-art Metal Injection Molding (MIM) technology. They are designed for use on any 2011 or 1911 pistol, with some minor fitting required. It is always recommended to have a competent Gun Smith fit safeties!

The Dropper Assembly is needed for shooters who wish to set up a second tool-head in the same caliber, and wish to quickly transition from, say, 9mm to .38super. Or from one 9mm bullet to another. A change is needed to the collator parts, and if a 2nd tool-head is to be used on the progressive reloader, it is quicker and easier to leave an adjusted Mr.Bulletfeeder dropper on each tool-head. This allows for quick swapovers, without the need to calibrate or adjust the dropper. Note that in most cases you will need to purchase an additional Powder Funnel for your second tool-head’s powder measure, as our expanding powder funnel is required for troublefree reloading.

The DAA Carbon 1911 Grips are 0.250 inch thick panels which create a surface that provides the flawless grip so critical for recoil control. The carbon offers a striking hi-tech appearance, and unparalleled durability. 
The tactical design includes a wide, deep, thumb cutaway which allows you unrestricted access to any mag-catch installed on your 1911. 

The CNC machined Carbon material is light weight extremely touch and is totally resistant to oils and solvents. 

These carbon grip panels offer not only improved performance when shooting your 1911, but also an attractive dark-colored carbon “techy” appearance. 

Each set include 4 stainless steel torx screws, with a custom head design, a torx key and are packed in a display-friendly blister-pack.

DAA PRIMAFILL is a semi-automatic primer-tube filling solution, able to quickly and easily fill both Small and Large primer tubes. It allows you to switch between Small and Large primers instantly, without tools or assembly.

The DAA Match-Ready Cleaning Kit is the perfect, comprehensive pistol cleaning and maintenance kit for the dedicated IPSC/USPSA shooter. With this kit in your range bag, you will have at hand all you need to clean and maintain your pistols at the range or in your hotel room. It’s designed as a self-contained travel cleaning kit for the serious shooter.

With Production Division on the rise and many shooters in this IPSC Division choosing a Kydex closed-body holster (and all USPSA Production shooters having to use it), creating a better Kydex holster is always high on our agenda. We believe in constantly striving to improve all our products, and the new innovations in the PDR PRO-II holster reflect that philosophy.

We took a long hard look at our PDR PRO holster, and combined with valuable customer feedback decided to make some changes to improve the product further.

>span class="s1">We upgraded this part from plastic to aluminum, and redesigned the manner in which the height adjustment and vertical lock-up is achieved. The PDR PRO-II now has a set screw in the ball itself, which can be accessed from its inner side, allowing you to adjust height to any position, not just in the predetermined 10 mm steps as before. Also this height adjustment can now be achieved without dismantling the holster and without losing any of the other settings.

>span class="s1"

>span class="s1">And of course the excellent features of the PDR PRO line have been retained: the slick fast unlined body, the advanced ball joint belt hanger with its wide range of adjustability, slim-line retention bars and spacers for use on competition belts ranging from 1.5”-2.0” in width.

Available only in Black, for right-handed or left-handed shooters.

The Shell Sorter™ is a simple product designed to reduce the time spent sorting brass by caliber, allowing you to enjoy more time reloading and shooting.

The Sorter simply sits on top of a common 5 gallon bucket, with a few shakes your brass is sorted by caliber. The Shell Sorter™ is comprised of three pans designed to sort several common calibers.

The three main calibers that most reloaders sort are 45 ACP, 40 S&W, and 9mm. We have labeled the sorters according to those three main calibers. The sorters do sort many more calibers!

The fastest way to sort is to stack all three of the pans together with the yellow pan on top, and the black on the bottom, in that way all your brass is sorted at the same time.

If you sort before tumbling as is recommended, most shells that are inside of each other will come apart with the shaking and are sorted correctly. However, if you tumble first, those are likely to jam together with small bits of media, and sometimes those require pliers.

The sorters can also take the place of your media sifter. Just tumble, pour your brass into the appropriate sorter(s), shake a bit, your media is in the bucket, and your brass is ready for the next step.

You can use this on the range so that you only bring home brass in the calibers that you reload.

The Shell Sorter™ is made of ABS, a very strong plastic which will give a lifetime of service. We placed a sorter underneath a car tire, and it didn't break or distort! In fact, it still worked!

Always wear gloves and a dust mask when working with used brass because of the levels of lead dust present.

Producing the perfect IPSC shooting pants has been a goal of ours at DAA for a long while. We have tried before several times, with varying degrees of success.

However now, with the new DAA SHOTAC Pants, we believe we have “hit the nail on the head!”.

Our SHOTAC Pant is made of lightweight, tough and durable rip-stop fabric, which provides ample flex and an extremely comfortable fit. The design and material choice allow you a comfortable range of motion, without appearing loose fitting or baggy. These pants do not look or feel like gym/sweat pants – but they provide as much flexibility and comfort as any sportswear!

The SHOTAC Pant features include:
- A self-adjusting tunnel waistband, with a full 2” range of fit
- An extra frontal pocket for that “load and make ready” magazine (or for your cell phone)
- Two large rear Velcro pockets
- Large, quick access angled side pockets
- Wide belt loops & double layered fabric in the belt area for increased comfort while wearing your shooting rig
- Double layered knee area, for increased durability
- Steel front snap with DAA logo. SHOTAC logo embroidered on back pocket flap
- Fade and stain resistant fabric, available in Black or Navy Blue.

Size Chart:
Small:            Waist: 30"-32"   Length 32"
Medium:        Waist: 32"-34"   Length 33"
Large:            Waist: 34"-36"   Length 34"
X-Large:        Waist: 36"-38"   Length 34"
XX-Large:     Waist: 38"-40"   Length 34"
XXX-Large:   Waist: 40"-42"   Length 34"

The Race Master Holster utilizes an efficient and easy system to allow shooters to switch their holster from one gun type to another by means of changing the Insert Block Assembly. This switch is fast and easy and can be done in less than a minute, and without losing any of the holster's adjustments or settings.

Compatibility list in ATTACHMENTS tab below.

The DAA Magnetic Powder Check 2.0 (US Pat. Pending) is a great addition to any progressive reloading machine, helping to ensure the quality and safety of your reloaded ammo. The unique new design uses a high-tech Reed Sensor and a magnet assembled to the plunger Rod, to assess if the charge in the case is of the correct height.

Many customers choose to start reloading on their XL650/750 without the optional case feeder, and for them the new DAA Mini Case feeder will be a great addition to their press!

The Hanger of the DAA MAX IDPA Holster is made of Glass-fiber reinforced polymer for strength and durability. It includes two spacers making it compatible with belts ranging from 1.5-2.0 inches in width. These two belt spacers can both be positioned above or below the belt, or split – thereby creating some height adjustability for the holster/pistol position. 4 screws securely connect the hanger to the holster body enable angle adjustment for personal preference. The Retention adjustment on the DAA MAX IDPA Holster is truly innovative.

The IDPA PDR PRO-II holster incorporates our latest generation Kydex holster body, as used in the popular PDR PRO-II holster. It is an efficient, fast holster body, available for many popular gun types for both right and left handed shooters.

The PDR-PRO-II holster body does not include the Suede lining that the PDR offers, making it more suitable for competition use, where speed and ease of draw are paramount. Attaching this PDR-PRO-II body to our Belt-Ride Ambidextrous Hanger, makes this holster a perfect choice for IDPA competitors or for general carry and range use. The bare Kydex cannot be beaten for speed, quick release and smooth draw. Tension adjustment is done by turning one, or both Phillips head screws, which are accessible from the outside of the holster body, while worn.

This hanger positions the holster body up close against the body and provides you a solid, yet tilt adjustable holster mount. It can be used with 1.5-2” wide belts and is fully ambidextrous, working equally well for RH or LH holsters. If you are using the belt spacers (most will, as most use a 1.5” belt) you can choose to have those spacers both above, below, or one above and one below the belt as you thread it through. This will provide you some height adjustment.

Available for right or left handed shooters, in Black only.

The DAA PRO Belt includes all the superior features of the long running DAA Competition Belt, and lifts them up a notch!
The quality and workmanship of this belt will make any owner proud! It features an attractive new dual-tone webbing on the outer belt and logo text on the inner. It includes a new unique name tag holder sewn into the outer belt webbing. You can now insert contact info and if you ever forget or lose your expensive rig, an honest finder can return it to you! A new rubberized DAA logo security loop completes this luxurious shooting belt.

The DAA PRO Belt is available in dual-tone Black, Blue, Red or Silver-Grey, with the color boldly displayed in the wide middle section of the belt. 

How to select the correct belt size: (do not select based on your pant size!)
1. Measure you actual waist circumference at the height where you plan to wear your belt.
2. Convert your measurements into Inches (1inch = 2.54cm)
3. Order the belt size which matches your measurement. Round upwards: if you measured 39”, order a belt size 40”.

After a considerable amount of prototyping and testing, we are very pleased to offer you these conversion kits for the Mr.Bulletfeeder by DAA and the Mr.BulletFeeder PRO, which will convert your machine to a point-down feeder.

Using the Mr.BulletFeeder you already have, and the parts included in this kit, you will be able to quickly convert your unit back and forth between base-down or point-down feeding.

The DAA Turbo Case-Feeder Plate is a highly modified and evolved reloading accessory which will greatly increase the output speed of your current Dillon case feeder. The plate is designed to handle all pistol calibers – from .380 to 0.45, so one plate can now handle all your pistol calibers!

Adjusting for various shell lengths can be done on the fly, without removing your rig, and without any tools. Simply turn the large tension wheel and the upper support slides up and down the rail to match your shell length.

Colored laser-cut insert plates decorate the upper and lower supports and are available in several colors.

The DAA Infra-Red Low Powder Sensor is an efficient, high-tech solution to a problem every reloader has encountered: Making sure to fill that powder hopper in time, before you accidently load empty cases without powder… (don’t feel stupid, we’ve all done it…)

The DAA All-Terrain Knee Guards were developed to offer excellent grip and protection on a multitude of shooting range surfaces. Designed to be tough and durable, yet not too large or bulky, these knee pads were configured by IPSC shooters, and specifically for our sport! 

The DAA 2G bag is a top-quality well-designed dual-pistol and magazine transport and storage solution. The 2G model is designed to hold two full-size pistols (or one Open pistol) and up to 10 magazines. The design of the bag allows for complete user customization, enabling to best configure the product to your needs and transport requirements.

An additional 6-tube Magazine Assembly for your Mini XL650 Case Feeder. It will hold about 150 pcs of 9mm brass, 130 pcs of .40 and about 120 pcs of .38S.

Cleaning with wet Rotary Tumblers or Ultrasonics requires the correct solution for the correct cleaning application. Lyman has partnered with a renowned chemical research team to develop the right solutions for use with today's new Cleaners. The Turbo Sonic case cleaning solution was formulated to deliver premium results in cleaning cases inside and out. The 32oz. value sized concentrated solution is the ideal way to save while producing "like-new" results.

- Specially formulated for optimum cleaning results
- Concentrated
- Value Sized 32 oz.

The DAA 1G bag is a top-quality well-designed pistol and magazine transport and storage solution. 

The 1G model is designed to hold one full-size pistol and up to 5 magazines. The design of the bag allows for complete user customization, enabling to best configure the product to your needs and transport requirements.

The DAA Universal Cleaning Kit is a truly comprehensive kit including all you need to maintain both rifles and pistols. The kits in designed to support 6 calibers, including these rifle calibers: 0.177, 0.223, 0.308 , and these pistol calibers: 9mm, 0.40 and 0.45.

The kit is packed in a sturdy Tactical-type case, made of heavy-duty D-600 material and including a large top-quality wrap-around zipper. Zipper heads have long cord heads for easy access. The case itself is Molle-ready, and can be attached on the outside of many bags and tactical packs. Multiple Molle-Pattern Velcro tabs on the front, allow you to add name tags, patches or other small attachment items. The case includes a rubberized DAA logo on a front Velcro tab.

Inside the kit is a multitude of accessories, all  neatly packed and held in place with dedicated pockets and straps. The kit includes the following items:

• The tactical case itself
• A large leak-proof bottle for the oil/solvent of your choice (supplied empty)
• A large bristle brush with wooden handle
• A plastic/rubber cleaning rod handle, which doubles as the pull through handle for the flexible cables
• Two flexible rubber-protected cables for rifle barrel pull though cleaning. With brass threaded ends
• Two bags of cleaning patches
• Three-piece set of Utility double-end brushes (Steel, Brass, Nylon)
• 4-piece Plastic Hook set
• Double-end Steel dental tool
• Rod for pistol barrel cleaning
• 6 pcs of bronze cleaning brushes, in the supported calibers
• 6 pcs of mop cleaning attachments, in the supported calibers
• 2 pcs patch holders (large and small)
• 3 pcs brass jags, in the supported pistol calibers

RANGE TIME is an Action Shooting training book, offering you a wide range of drills to help improve your shooting skills. It's the perfect book to have in your range bag as you head out to practice – making each session more productive and enjoyable.

The DAA Primer Pickup Tubes are made of the highest quality aluminum, produced using custom-made extrusion tools and tightly controlled for accuracy and finish. Close attention is paid to the consistency of the internal and external chamfering to ensure optimal feeding. The matt-finish anodizing makes identifying the primer size immediate, while giving these tubes a striking attractive look.

Most AR-15 mag pouches have their roots in tactical or military applications. Not this one! DAA set out to create a totally new competition orientated pouch for the AR-15, and we are very proud of the result, the DAA AR-15 Racer Pouch!

>span class="s1">Supplied as standard with our Alpha Rail System, the pouch can be adjusted for tilt or exchanged for a pistol pouch or shotshell holder.

The DAA Deluxe Magnetic Pouch utilizes two powerful 32mm magnets to hold the magazine securely in place while providing a smoother release than that achieved from the larger standard Magnetic Pouch. The support side walls allow us to use smaller magnets which in turn make the pouches more useable as an all-round pouch for every day use, and not just as a designated pick-up Pouch.

For those shooters who like the simplicity and minimalist look of an open magnetic pouch - this is the perfect choice! The slim body make it possible to position pouches closer together while still leaving enough room to reach down and grab the magazine correctly. The lack of external or front pouch walls allow the pouches to be spaced that much closer together. Perfect for Standard or Production where one must wear the pouches behind the hip bone.

The pouch is attached to our new model belt hanger, which locks securely on any 1.5" belt, clamping down to hold tightly even on thinner belts. The pouch can be swivelled around the centre screw (lower magnet's middle) to angle the pouch as designed. The off-centre mounting point on the hanger offers the option of two heights to choose from. The pouch body is machined from solid Delrin and so is tough and durable. Available in Black only.

Available for Right-Hand users only.

In 2011 we introduce the all aluminum Race Master Magazine Pouches, the first of their kind. Their innovative design is so different from other model pouches, that all who used them were instantly fans.

However, their one shortcoming is their relative high price tag... A $60 pouch is not affordable by all, especially when you consider that you need 3 or 4 of them on your belt. So we set out to develop and produce a plastic molded version of this same winning design, and we are proud to introduce the all new DAA Racer Magazine Pouch, the perfect mate for the DAA Racer Holster!

The DAA Racer pouches borrow heavily from the Race Master Pouch. In fact, we took the very same body design, modified it to suite plastic mounding requirements, while maintaining the exact same unique “pressure from the back” adjustable holding system that has proven so successful. Interchangeable inserts allow you to go from larger 2011 mags to smaller CZ/Tan mags. A third pressure spacer is included for Glock and M&p mags.  A single stack spacer is available as an accessory as well.

The pouch is completely ambidextrous, allowing easy mounting for left hand or right had users. And you can even mount the pouch at 90deg away from the body, just as you can in the RM version.

The BabyUpLULA loader is a military quality personal pistol magazine loader for 0.22 to .380 caliber rounds. It is a radical new design, which allows for easy and smooth loading of practically ALL single and double stack pistol magazines in these small calibers (for larger calibers use the UPLULA).

While loading you can support the base of the magazine on your body/thigh or on a table when available.

Features:
- Loads all .22-.380 caliber magazines- No inserts, spacers or adjustments at all! One size fits all.
- Easy and quick loading; Rounds just drop in with no fingers pushing or forcing the rounds.
- Up to one round per sec. loading rate, with some practice.
- Fits in your hand and pocket, weighs only 50 grams.
- Highly durable - constructed of the best reinforced polymer.
- No more strain or pain when loading those mags!
- Load hundreds of rounds, easily.

Does not load the following:
Converted .22 mags. .22L
Kimber .22 .22LR
S&W 22A/22S .22LR
Beretta U22 NEOS .22LR
Walther P22 .22LR
Browning .380 BDA .380
Beretta 84 .380 .380
Beretta 81 .32 .32
Tuaras PT380 .380
Colt ACE .22LR
GSG 1911 .22LR
Ruger SR22 .22LR

The 22UpLULA™ loader & unloader is made for loading .22LR wide body mags. 1/2”, like .22LR 1911 mags and other .22LR converted mags. It has the body width of our UpLULA™and has a narrower metal beak designed for .22LR rounds.

(It will not load .380 to .45 cal. mags. !)

Uplula, divice to load and unload your magazines. Easy and quick loading and unloading. The UpLULA loader is a military quality personal universal pistol magazine loader. Easy and quick loading. Rounds just drop in with no fingers pushing or forcing the rounds.
Up to one round per sec. loading rate, with some practice.
Fits in your hand and pocket, weighs only 66 grams (2.3 Ounce).
Highly durable - constructed of the best reinforced polymer.
No more strain or pain when loading those mags!

Fits Scorpion 9mm-type polymer magazines Ver #1 & Ver #2. The LULA loader & unloader is a military quality personal magazine loader and unloader. It facilitates both loading of loose rounds into a magazine and unloading them out of the magazine. It does so quickly, safely and comfortably. Usable for tens-of-thousands rounds.

The pouch is ambidextrous and can be mounted on the adjustable belt hanger for right- or left-handed users. It can even be mounted at a 90 deg angle away from the body. The pouch utilizes the same belt hanger as the Racer Pouch, enjoying the solid sturdy design and rock solid angle adjustments that the hanger offers.

This new exciting product from Maglula is the most compact and versatile AR15 loader ever introduced. The StripLula will fit all plastic and metal AR15 magazines, clip onto the top lips and allow you to quickly and effortlessly load your mags.

It can be used to load ammo packed in stripper clips (12 seconds to load 30 rounds) or it can be used to load individual rounds(40 seconds to load 30 rounds).

It can even be used as a simply unloader, allowing the unloading of a 30 round magazine in 15 seconds flat.

If you shoot an AR15 – you’ve to have one of these!

The 2018 Hanger Assembly for the Mr.Bulletfeeder by DAA ships as standard with all new units leaving DAA as of Jan 2018.

Should you wish to upgrade your current hanger assembly (the one with the round Delrin pucks and aluminum rods) you can do so by purchasing this new hanger separately. It is reverse-compatible with all previous Mr.Bulletfeeder by DAA units.

The new hanger is a simplified design, which makes assembly and adjustments to the tilt angle easier and faster to make. The Horizontal aluminum bracket clamps directly onto the motor gear box, allowing for easy assembly on either the left or the right side of the collator, to accommodate your specific position mounting needs.

The vertical piece hangs over the side of your case feeder, and connects to the horizontal bracket by means of a large M8 bolt, which can be loosened and rotated for tilt adjustments.

Sturdy attachment to the collator, a simplified design with fewer parts, thick aluminum profiles and way fewer screws make this hanger simpler and easier to setup and adjust.

Note: Machine NOT included - only Hanger. 

The unique retention system that all DAA pouches utilize has made the Racer Pouch a very popular choice for competition shooters worldwide. However, to make it suitable for IDPA use, some changes and new features were required.

The IDPA Racer Pouch utilizes the same tested and proven Racer Pouch body on an entirely new hanger that allows the slide-onto-belt functionality required for IDPA competitors. The hanger is designed to position the pouch closer to the body, making it suitable for IDPA, but also with an eye to the carry and self-defense markets.

The thumb-adjustable wheel is removed to meet the IDPA rules. Tension adjustment is still possible by means of a pressure screw that can be turned with a hex key, accessed from the back of the pouch body.

The IDPA Racer Hanger is ideal for threading onto medium to thick belts with a width ranging from 1.5” to 2.25” (39 mm to 57 mm), using a set of included click-in spacers. For each belt width use the appropriate spacers to get a solid and secure fit. Interchangeable pouch inserts allow you to go from larger 2011 mags to smaller CZ/Tan mags. A third pressure spacer is included for Glock and M&P mags. A single stack spacer is also available as an accessory.

Please note: These IDPA pouches are designed to be used on IDPA legal leather belts, not on Velcro inner/outer belt systems as used in IPSC, which are not legal for IDPA use. It is very difficult to install these pouches onto our Premium belt, as they are not designed for use on that belt. It is not a recommended combination.

EP7 Sonic Defenders Ultra protect your hearing without interfering with your ability to hear routine sounds or conversations. Their foam-tipped stem design, featuring soft memory-foam Comply™ Canal Tips, fits most people and provides a Noise Reduction Rating (NRR) of 28dB. Sounds, at safe levels, are allowed to pass through into the ear canal, while potentially harmful noises (above 85dB) are reduced via a proprietary design that incorporates a special noise-reducing filter. EP7s include attached filter caps, which can be inserted for additional protection and blocking out lower-level noise, like that heard on a plane, in situations where hearing ambient sounds or conversations isn't critical. Right/left color-coded Sonic Defenders Ultra are made from a soft but durable, hypoallergenic polymer that provides all-day comfort and an extended product life (up to 6+ months, depending on usage and care). Their patented EarLock® retention rings lock the earplugs in place, while soft foam-tipped stems provide secure seals in the ear canals. And their low-profile design means they can be worn while wearing a helmet or mask, or while using a phone or headset.

Comfortable EP7 Sonic Defenders Ultra also serve as earpieces for compatible radio communication systems* simply by removing the noise-reducing filter and attaching the earpiece to the system. NOTE: EP7 earpiece will not provide hearing protection if the noise-reducing filter is removed.

EP7s are available in small (S), medium (M), and large (L) - NOTE, WE ONLY STOCK MEDIUM. Proper size is based on the dimensions of your ear's concha bowl. Size "medium" fits most people;

EP7 Sonic Defenders Ultra are sold as a single left/right set or in a box containing 25 sets. Each set is packaged in a convenient carry case and includes a polymer lanyard and an extra set of memory foam Comply™ Canal Tips;

Features
- 28dB Noise Reduction Rating (NRR) with filter caps inserted
- Lowers potentially dangerous noise levels above 85dB
- Hear safe sound levels (with filter caps out) as if you weren't wearing ear plugs
- Patented EarLock® retention rings utilize seven contact points to lock earpieces in place and fit the same way every time
- Soft memory-foam Canal™ Comply Tips provide secure seals in ear canals and all-day comfort
- Made from hypoallergenic, medical-grade polymer that's soft, comfortable, and durable
- Low-profile design allows you to keep them in place while wearing a mask, helmet, hat, or while using phone, headphones, or supplemental hearing muffs
- Serve as earpieces for compatible* radio communication systems
- 26" polymer lanyard included
- Additional pair of Comply™ Canal tips included

The DAA Bullet Puller is a must-have for serious reloaders. This tool takes all the hassle out of separating your used cases from the bullet and powder. The tool itself is formed from high-quality plastic with an aluminum rod to ensure many years of durable performance.

The DAA Bullet Puller can be used for ammunition of all sizes ranging from .17 Remington to .50/70 Government cases. This tool comes with an extra set of three collets, should the originals happen to break. The tool itself is virtually indestructible and makes quick work of disassembling your ammunition for reloading.

Building on the success of the Magnetic Single Stack Pouch, we are pleased to offer the same configuration in two new models, a 2011 wide body and a CZ/TAN double-stack magazine size.

(Note that the wider CZ TS mags should select the 2011 model!)

Two 20 mm-round magnets hold the magazine firmly inside the  pouch track, allowing for secure retention and yet enabling a smooth and effective magazine release. The base on the pouch is the same as used in the Racer line, providing for two height positions and a step rotation adjustment. The thin steel plate at the back of the belt-hanger minimizes separation between the inner and outer belt. Perfect for these pouches, which are often mounted close together on the outer shooting belt. This pouch configuration is ideal when wanting to mount pouches close together and allow easy access to multiple magazines without having to reach too far back.

Available in Black only.

A common question we hear is “Can I use the Bullet Feeder on my 550?” Or “Can I use the Bullet Feeder and still continue to use my powder check on my 650?”.

Such Seating and Crimping dies are available, and so we decided it was time we made them directly available to our customers as well. LEE Precision produces these, so no question about the quality. 

The 2-in-1 Seating and crimping die include an O-ring lock machined into the nut, which allows you to hand tighten only – and the die stays put! They include a finger adjustable floating bullet seater. For durability they are heat treated to ideal hardness and polished to the smoothest finish.

DAA XL650/750 Debris-Out Casefeeder Adaptor, which replaces the original Dillon case feeder adaptor on your press, the slots cut in the pipe allow the debris to fall out the sides onto the small collection tray and the chances of a jam-up are greatly reduced.

The LULA loader & unloader is a military quality personal magazine loader and unloader. It facilitates both loading of loose rounds into a magazine and unloading them out of the magazine. It does so quickly, safely and comfortably. Usable for tens-of-thousands rounds.  

Advantages: Both Loads AND Unloads FAST! 35sec to load 30 rd, 5sec unloading 30 rd. Safe on fingers and magazine,  absolutely no sore thumb! Pocket size, just drop on in your range bag! Durable, made of the best quality glass-reinforced polymer Weights approx. 38grams (1.3ounce) Constructed of only two parts ISO9002 manufacturing Chemicals resistant

Other advantages: A huge time saver when several magazines need to be cleaned (unloaded and reloaded). Needs no dexterity or training to use, suites right and left handed users Needs no maintenance at all. Useable also in zero light environment. Useable with gloves in freezing weather. Loading 1. "Click" the LULA loader over the open end of the magazine; 2. Have the LULA loader and magazine face upwards; and 3. Move the lever to-and-fro as you feed rounds into the magazine.

Unloading 1. "Click" the LULA loader over the open end of the magazine; 2. Have the LULA loader and magazine face downwards; and 3. Move the lever to-and-fro as the rounds expel out of the magazine.

That's it !

The DAA Single Stack Magnetic Pouch is our latest magnetic pouch design, offering an ultra-compact and ultra-efficient magazine holding system for single stack shooters.

It positions the magazine only in the 90 deg “away from the body position” and is an excellent option for shooters who choose to carry their magazines this way, as many single stack shooters do.

The DAA Single Stack Magnetic Pouch utilizes two small yet powerful magnets that hold the magazine firmly in place while allowing it to rest inside its supporting track. The track guides the magazine in and out of the pouch and prevents it from accidentally being dislodged. The release achieved from this magnetic pouch is the smoothest of any of our magnetic pouches, partly due to the smaller contact area with the single stack magazines.

The belt hanger is the same as that used in the Racer pouches - the same minimalist steel plate design which eliminates separation between your inner and outer belt. The pouch can be adjusted for tilt in very small steps, allowing you to find your preferred angle. Once the correct angle is set and the center screw tightened, the serrations in the connector piece lock up, preventing any possibility of the pouch rotating until the center screw is loosened several turns.

A set of two loaders for loading .22LR cal. single-stack narrow mags with a projecting side-button, such as:

• Ruger MK I, II, III, 22/45
• Browning BuckMark
• Beretta U22 NEOS
• COLT Woodsman/Cadet
• High-Standard .22
• S&W 22A/22S (only X10-LULA™ will load well)

The DAA Dry-Fire Swinger Target allows you to enrich you dry-fire experience adding a swinger – one of the least practiced targets, and one which many find challenging.