The 22UpLULA™ loader & unloader is made for loading .22LR wide body mags. 1/2”, like .22LR 1911 mags and other .22LR converted mags. It has the body width of our UpLULA™and has a narrower metal beak designed for .22LR rounds.

(It will not load .380 to .45 cal. mags. !)

Laser cut plastic logo inlays for the Alpha-X holster body and hanger. These inlays have 3M tape on their back for easy installation on the holster assembly.

The Alpha-X holster by Double-Alpha has taken the shooting world by storm, fast becoming the choice of top shooters worldwide. And while the reviews and feedback have been overwhelmingly positive, we have had a few requests for a Thigh Pad option to be made available for this holster.

* This is a blank Alpha-X holster aseembly only. If you require it with an insert, go the to full holster product page.

Some shooters prefer to have a muzzle support on their competition holster. This is an indisputable fact.

While most users will find that the Race Master holster functions perfectly without the additional muzzle support, there are some added advantages to using this extension: The muzzle support prevents the gun from being dislodged upwards, which could happen if bumped on the shooters thigh, or against a prop, during a walkthrough. If the holster was left unlocked, the gun can be dislodged. The muzzle support prevents this from happening.

The BabyUpLULA loader is a military quality personal pistol magazine loader for 0.22 to .380 caliber rounds. It is a radical new design, which allows for easy and smooth loading of practically ALL single and double stack pistol magazines in these small calibers (for larger calibers use the UPLULA).

While loading you can support the base of the magazine on your body/thigh or on a table when available.

Features:
- Loads all .22-.380 caliber magazines- No inserts, spacers or adjustments at all! One size fits all.
- Easy and quick loading; Rounds just drop in with no fingers pushing or forcing the rounds.
- Up to one round per sec. loading rate, with some practice.
- Fits in your hand and pocket, weighs only 50 grams.
- Highly durable - constructed of the best reinforced polymer.
- No more strain or pain when loading those mags!
- Load hundreds of rounds, easily.

Does not load the following:
Converted .22 mags. .22L
Kimber .22 .22LR
S&W 22A/22S .22LR
Beretta U22 NEOS .22LR
Walther P22 .22LR
Browning .380 BDA .380
Beretta 84 .380 .380
Beretta 81 .32 .32
Tuaras PT380 .380
Colt ACE .22LR
GSG 1911 .22LR
Ruger SR22 .22LR

Simply the fastest and most convenient way to clean your gun barrel, be it a pistol, a rifle or a shotgun. Simply drop the weighted end down the barrel, from breach to muzzle and pull through. Do so with or without solvent, as best suites you needs. One pull runs a copper bristle brush as well as a wide long swab down the length of your barrel. You do not even have to disassemble the weapon to clean! Can be complete in seconds, and your barrel will be ready for another session on the range or in the field. 
 

CED has taken the BEST Range Bag on the market today to an entirely new level of design and function! The result is the new CED Deluxe Professional Range Bag! 

As any reloader knows, adjusting a die on a tightly spaced tool head can be difficult and aggravating. The die nuts and various machine parts do not allow easy access and using regular wrenches can be near impossible. The DAA 1 Inch Box-End Wrench is the solution to this problem! The custom made, laser cut, stainless steel wrench is strong enough to last a lifetime and thin-walled enough to fit between any dies for easy access and adjustment.

The 11-Coil (125-140mm mags) DAA 2011 magazine springs are made from hi-quality spring wire, and carefully formed and manufactured to maximize reliability, capacity and longevity.

The DAA Carbon 1911 Grips are 0.250 inch thick panels which create a surface that provides the flawless grip so critical for recoil control. The carbon offers a striking hi-tech appearance, and unparalleled durability. 
The tactical design includes a wide, deep, thumb cutaway which allows you unrestricted access to any mag-catch installed on your 1911. 

The CNC machined Carbon material is light weight extremely touch and is totally resistant to oils and solvents. 

These carbon grip panels offer not only improved performance when shooting your 1911, but also an attractive dark-colored carbon “techy” appearance. 

Each set include 4 stainless steel torx screws, with a custom head design, a torx key and are packed in a display-friendly blister-pack.

The DAA 1911/2011 Ambidextrous Safeties with Shields are precision-made stainless-steel Safeties made with state-of-art Metal Injection Molding (MIM) technology. They are designed for use on any 2011 or 1911 pistol, with some minor fitting required. It is always recommended to have a competent Gun Smith fit safeties!

The DAA 1G bag is a top-quality well-designed pistol and magazine transport and storage solution. 

The 1G model is designed to hold one full-size pistol and up to 5 magazines. The design of the bag allows for complete user customization, enabling to best configure the product to your needs and transport requirements.

A common question we hear is “Can I use the Bullet Feeder on my 550?” Or “Can I use the Bullet Feeder and still continue to use my powder check on my 650?”.

Such Seating and Crimping dies are available, and so we decided it was time we made them directly available to our customers as well. LEE Precision produces these, so no question about the quality. 

The 2-in-1 Seating and crimping die include an O-ring lock machined into the nut, which allows you to hand tighten only – and the die stays put! They include a finger adjustable floating bullet seater. For durability they are heat treated to ideal hardness and polished to the smoothest finish.

The DAA 2G bag is a top-quality well-designed dual-pistol and magazine transport and storage solution. The 2G model is designed to hold two full-size pistols (or one Open pistol) and up to 10 magazines. The design of the bag allows for complete user customization, enabling to best configure the product to your needs and transport requirements.

A set of 4 fiber reinforced hard-nylon hooks, perfect for reaching into those hard-to-get-to corners and indents in your firearms, for cleaning and maintenance.

The plastic material used ensures that there is no risk of scratching or damaging your valuable firearm parts as you work on it. The assortment of end tips and shapes provides you with options to find the best form for the job at hand.

Packed in a plastic sleeve, with a cardboard header, suitable for display hanging.

The DAA All-Terrain Knee Guards were developed to offer excellent grip and protection on a multitude of shooting range surfaces. Designed to be tough and durable, yet not too large or bulky, these knee pads were configured by IPSC shooters, and specifically for our sport! 

Most AR-15 mag pouches have their roots in tactical or military applications. Not this one! DAA set out to create a totally new competition orientated pouch for the AR-15, and we are very proud of the result, the DAA AR-15 Racer Pouch!

>span class="s1">Supplied as standard with our Alpha Rail System, the pouch can be adjusted for tilt or exchanged for a pistol pouch or shotshell holder.

Building on the success of the Magnetic Single Stack Pouch, we are pleased to offer the same configuration in two new models, a 2011 wide body and a CZ/TAN double-stack magazine size.

(Note that the wider CZ TS mags should select the 2011 model!)

Two 20 mm-round magnets hold the magazine firmly inside the  pouch track, allowing for secure retention and yet enabling a smooth and effective magazine release. The base on the pouch is the same as used in the Racer line, providing for two height positions and a step rotation adjustment. The thin steel plate at the back of the belt-hanger minimizes separation between the inner and outer belt. Perfect for these pouches, which are often mounted close together on the outer shooting belt. This pouch configuration is ideal when wanting to mount pouches close together and allow easy access to multiple magazines without having to reach too far back.

Available in Black only.

The DAA Case Lube is a result of much testing and experimentation to find the best performing formula. The non-aerosol spray-cap bottle is easy and efficient to use. 

The DAA CED7000 EVA Case offers a custom-made solution to store and/or carry your CED7000 timer at the range or in your range bag. The case is constructed of sturdy, velvet-lined EVA, with a high quality zipper tracking around 3 sides.

The DAA Deluxe Magnetic Pouch utilizes two powerful 32mm magnets to hold the magazine securely in place while providing a smoother release than that achieved from the larger standard Magnetic Pouch. The support side walls allow us to use smaller magnets which in turn make the pouches more useable as an all-round pouch for every day use, and not just as a designated pick-up Pouch.

For those shooters who like the simplicity and minimalist look of an open magnetic pouch - this is the perfect choice! The slim body make it possible to position pouches closer together while still leaving enough room to reach down and grab the magazine correctly. The lack of external or front pouch walls allow the pouches to be spaced that much closer together. Perfect for Standard or Production where one must wear the pouches behind the hip bone.

The pouch is attached to our new model belt hanger, which locks securely on any 1.5" belt, clamping down to hold tightly even on thinner belts. The pouch can be swivelled around the centre screw (lower magnet's middle) to angle the pouch as designed. The off-centre mounting point on the hanger offers the option of two heights to choose from. The pouch body is machined from solid Delrin and so is tough and durable. Available in Black only.

Available for Right-Hand users only.

DAA XL650/750 Debris-Out Casefeeder Adaptor, which replaces the original Dillon case feeder adaptor on your press, the slots cut in the pipe allow the debris to fall out the sides onto the small collection tray and the chances of a jam-up are greatly reduced.

Many customers choose to start reloading on their XL650/750 without the optional case feeder, and for them the new DAA Mini Case feeder will be a great addition to their press!

The DAA Dislodge-Wedge is designed to be much larger and longer than the original Dillon part, reaching down to the very base of the plate, and providing a more gradual, angled surface to clear stacked cases as the disc rotates, at any speed.

The DAA Dry-Fire Practice Magazine is designed to emulate as closely as possible the feel and performance of a fully loader real magazine. It allows you to dry-fire without introducing dummy loaded rounds to weigh down real magazines, which can be risky, and saves wear on your real mags.

The DAA Dry-Fire Swinger Target allows you to enrich you dry-fire experience adding a swinger – one of the least practiced targets, and one which many find challenging.

Dry-firing is one of the most effective methods to improve you shooting skills. It is cheap – no ammo is required. It is convenient – you can do it in the comfort of your home (don’t let the neighbors see you…). And it is an excellent way to build subconscious skills without the distractions creates by target feedback – good or bad hits. But in order to make your dry-fire practice as productive as possible, it needs to be as realistic as possible. You need to use YOUR gear, your holster and gun, and you need to make sure that you do GOOD practice only. Which means pulling the trigger only when the sight picture is correct!

- IPSC: This DAA Dry-Fire Target Set consists of 20(!) precisely scaled down IPSC Classic targets. When placed on a wall at a distance of 2.5-3 meters, they will serve to simulate targets at distances of 15, 20 and 30 meters.

- USPSA: This DAA Dry-Fire Target Set consists of 17(!) precisely scaled down USPSA Metric targets. When placed on a wall at a distance of 2.5-3 meters, they will serve to simulate targets at distances of 15, 20 and 30 meters.

The DAA Dust Cover is made of durable long-lasting polyester 600D and features a slick “no-snag” lining to ensure easy-on-easy-off usage.

The double layer material and thin padding offer good protection to your valuable firearm without becoming too bulky or taking up too much space in your range bag. The material flaps beneath the sturdy zipper ensure that neither dust nor rain get onto your gun.

Each pistol cover includes a handy transparent ID pocket for placing a business card or competitor's badge to ensure that you and your dust cover can be reunited if separated on the range.


Available for right-hand shooters only and Standard (for Standard and Production guns).

The DAA Elbow pads are specifically designed to meet the needs of IPSC/IDPA shooters on the range. What is needed is a lightweight yet durable pad which offers the required protection when going prone, without adding bulk and without compromising the shooting position or making it less comfortable. The DAA Elbow pads deliver just that! 

The pads themselves are made of high density EVA foam, which offers longer life and better protection. The pads are in the form of small circular disks, which are tightly held together to offer seamless protection, while providing full flexibility and comfort of wear. The sleeves are made of 90% Polyester and 10% Spandex, to offer comfort and excellent fit. They are machine washable. Silicon piping is incorporated at the top and bottom edges of the sleeve, to ensure the elbow protection does not slide up or down while you shoot and move. 

Included is a set of two pads, black, with DAA logo.
Available in two sizes, to fit most.
Sizing note: choose M-L if you normally wear a Medium or Large top or choose XL-XXL if your shirt size is XL/XXL or larger.

The DAA Single Pistol Case offers a compact and affective storing and transport solution for one full size pistol. The EVA carbon-fiber-finish outer shell offers protection and durability, while the velvet-lined foam padding holds your pistol securely in place. The inner dimensions are large enough to accommodate any Production, Standard or Carry Optics pistol we tested with. However, it will be too small for a full-size Open Pistol.

Laser cut plastic logo inlays for the Flex holster body. These inlays have 3M tape on their back for easy installation. Note that they also have a transparent protective film stuck on the color side – you may want to peal that off for best appearance.
It is possible to remove the color inlays and swap them for a new color when desired. However, the old color inlay may break when being removed. 

Inlays for left and right hand are different.

As most serious IPSC and USPSA pistol shooters know, preventing slip in your grip is of utmost important for high-speed accurate shooting. A grip-enhancement lotion is one of the best ways to achieve that anti-slip, without the need to apply excessive force to the grip. Especially in wet conditions or in extreme heat, sweating palms can really hurt your performance. But with a few drops of the new GRIPZ by DAA, applied just before you shoot, your palms remain dry and your grip secure.

GRIPZ by DAA is a grip enhancer designed by shooters for Shooters. Supplied in a plastic bottle with a practical “Snap-cap” type closure, that ensures a good seal and quick, easy, one-handed access when needed. GRIPZ by Double Alpha does not dry as white in color as other competing products, and will not rub off as easily onto your clothing and pistol grip. It will be cleaner to use than other leading grip-enhancers popular in our sport.

GRIPZ is silica based grip-lotion, diluted with alcohol and stabilizers for the ultimate performance and longevity. Each bottle holds 75ml (some 20% more than competing products).

Double the capacity of your Dillon powder hopper with this clear PT extended Hopper. The Hopper measures 36cm long and replaces the 18cm long Dillon Original.

It assembles in the same way, using the two screws in place on the Dillon.

>span class="s1">An acrylic powder baffle is included with the extended hopper.

1050 users, please note: this hopper it too long to fit under the case feeder on your 1050. You will need to shorten it to fit. The tube can be shortened using a saw or serrated knife. About 9cm need to be cut off to fit under the 1050 case feeder.

We are pleased to offer the IDPA Magazine Belt attachment separately too, as an accessory to be used with other pouches of your choosing.

This attachment is made of PA66 Nylon with 30% glass fiber, making it extremely tough and durable. It can be used to attach the gear of your choice to any belt, with a thickness up to 8mm and a width of 1.5”-2.25” (39mm-57mm). The hanger includes a set of six spacers which allow you to quickly and easily adjust the width of the mounting slots to suite your belt.

The hanger includes the M5 mounting screw and our unique DAA serrated adaptor plate, which clicks into many DAA products, including our Racer pouches, most of our magnetic pouches, AR15 pouch quad loaders and more. But we also include a larger rubber washer which can be used to attach a Race Master pouch body to this hanger by placing the rubber washer between the hanger and pouch body instead of the serrated washer.

Please note: These IDPA pouches are designed to be used on IDPA legal leather belts, not on Velcro inner/outer belt systems as used in IPSC, which are not legal for IDPA use. It is very difficult to install these pouches onto our Premium belt, as they are not designed for use on that belt. It is not a recommended combination.

Available in Black only

The unique retention system that all DAA pouches utilize has made the Racer Pouch a very popular choice for competition shooters worldwide. However, to make it suitable for IDPA use, some changes and new features were required.

The IDPA Racer Pouch utilizes the same tested and proven Racer Pouch body on an entirely new hanger that allows the slide-onto-belt functionality required for IDPA competitors. The hanger is designed to position the pouch closer to the body, making it suitable for IDPA, but also with an eye to the carry and self-defense markets.

The thumb-adjustable wheel is removed to meet the IDPA rules. Tension adjustment is still possible by means of a pressure screw that can be turned with a hex key, accessed from the back of the pouch body.

The IDPA Racer Hanger is ideal for threading onto medium to thick belts with a width ranging from 1.5” to 2.25” (39 mm to 57 mm), using a set of included click-in spacers. For each belt width use the appropriate spacers to get a solid and secure fit. Interchangeable pouch inserts allow you to go from larger 2011 mags to smaller CZ/Tan mags. A third pressure spacer is included for Glock and M&P mags. A single stack spacer is also available as an accessory.

Please note: These IDPA pouches are designed to be used on IDPA legal leather belts, not on Velcro inner/outer belt systems as used in IPSC, which are not legal for IDPA use. It is very difficult to install these pouches onto our Premium belt, as they are not designed for use on that belt. It is not a recommended combination.

DAA IPSC Scoring Overlay Gauge is made of sturdy 0.75mm thick hard transparent plastic, these overlay gauges are a “must have item” in every range bag! 
They are the size of standard credit cards and so fit easily into any wallet or pocket. 
Include precisely drawn caliber circles and a handy 50mm side ruler for measuring gear’s distance from the body.

The DAA Infra-Red Low Powder Sensor is an efficient, high-tech solution to a problem every reloader has encountered: Making sure to fill that powder hopper in time, before you accidently load empty cases without powder… (don’t feel stupid, we’ve all done it…)

The DAA Bullet Puller is a must-have for serious reloaders. This tool takes all the hassle out of separating your used cases from the bullet and powder. The tool itself is formed from high-quality plastic with an aluminum rod to ensure many years of durable performance.

The DAA Bullet Puller can be used for ammunition of all sizes ranging from .17 Remington to .50/70 Government cases. This tool comes with an extra set of three collets, should the originals happen to break. The tool itself is virtually indestructible and makes quick work of disassembling your ammunition for reloading.

The Lynx Belt Half Link Extension Piece is a solution to requests received by some shooters using the unique DAA Lynx belts, wanting to be able to extend the length of their belt by half a link’s length only.

Handy little steel punch tool, designed to make removing the rolls pins quick and easy. Should you need to remove a link, or wish to insert another, removing the roll pin can be difficult without a punch tool. With this little tool, the task is easy, and being compact and lightweight lets you leave it in your range bag tool kit.

When buying Lynx belt a set of 50 roll pins is included, but if should you require more than that – you can purchase another bag of 50- Roll pins separately.

The DAA Magnet Cover is a practical and super-attractive addition to your Rig!

Designed to perfectly fit on the DAA 48mm large magnets, this cover is custom made from durable nylon, rubber coated, and incorporates a laser-cut stainless-steel (430) DAA Logo.

The logo itself is what firmly holds the cover in place – being made of magnetic stainless-steel, and thus attracted to the magnet.

Most serious shooters carry one of these large magnets on their belts, as they are real time savers on pick-up stages. But let’s face is – those magnets can be a pain, picking up steel debris sticking to your car interior or those metal storage cupboards. 

Not anymore! 

This cover does not completely eliminate the magnetic pull, but it greatly reduces it to where it’s no longer an issue.

The magnetic pull through the cover is still just strong enough to hold a magazine during a Load or Unload procedure, but not strong enough to be trustworthy when running.

So leave the cover on until that stage in which you need your pick-up magnet, at which time you simply pop the cover off before the stage, and drop it in your pocket until after you’re done.

 Fast, simple, practical and very striking in appearance!

 * Magazine Pouch not included

Due to popular demand we are now pleased to offer you the DAA Super-Strong magnets, sold separately, for mounting on the DAA Alpha-X / Race Master pouches, or any other type of base you care to use them on.

These Zinc plated magnets are incredibly strong, offering approx. 87kg of pull strength. With these magnets, you can slap on that magazine quickly and confidently and know that it will not fall off as you move. The magnets measure almost 50mm in diameter, and are 12mm thick (with their casing).

Fitting to an Alpha-X / Race Master Pouch:
In the front of the pouch there is a 4.2mm hole, which can be used to attach the magnet to the pouch body. You will need to tap (thread) this hole using an M5 Tap. Do it carefully and slowly as the thread needs to be precise, as there is only a 2.5mm side wall to work with. once done, simply screw the magnet directly onto the front of your leading pouch. We suggest using a little LockTite on it, to keep the screw from opening.

Do not worry if the tip of the screw protrudes slightly into the pouch body - the magazine does not reach down far enough to hit it.

A cool, new, practical way to carry your Grip-Enhancer into action!

Many shooters like to carry their Grip Enhancer of choice on their belts, so they can apply it just before the “Load and make ready” command. And what is needed is a quick and secure carrying solution, which allows you fast access to the Grip Enhancer and a quick return to belt retention. The New DAA Magnetic Grip-Enhancer does just that – and in style!

Two super-strong magnets are fitted into the custom-made silicone belt and bottle attachments, clicking together and locking securely in place. Run, jump or spin – you wont accidentaly dislodge this holder. Yet a moderate tug/rotation motion and it will come away in your hand for quick application.

The DAA Magnetic Grip-Enhancer Holder is a perfect fit for a bottle of Progrip or for the new DAA GRIPZ lotion. (Any bottle of approx. 34-36mm in diameter could be held securely.)

Available in Black, Blue or Red colors.

The DAA Magnetic Powder Check 2.0 (US Pat. Pending) is a great addition to any progressive reloading machine, helping to ensure the quality and safety of your reloaded ammo. The unique new design uses a high-tech Reed Sensor and a magnet assembled to the plunger Rod, to assess if the charge in the case is of the correct height.

Since we introduced our DAA Turbo Case-Feeder Plate for the Dillon case feeders, we’ve had Mark-7 customers asking us if they could use it with their High Speed 11” Mark7 case feeder (as supplied with the Apex-10 press). The answer is YES! The disk is the same size and it works great in the excellent Mark-7 case feeder. 

The DAA Match-Ready Cleaning Kit is the perfect, comprehensive pistol cleaning and maintenance kit for the dedicated IPSC/USPSA shooter. With this kit in your range bag, you will have at hand all you need to clean and maintain your pistols at the range or in your hotel room. It’s designed as a self-contained travel cleaning kit for the serious shooter.

The Hanger of the DAA MAX IDPA Holster is made of Glass-fiber reinforced polymer for strength and durability. It includes two spacers making it compatible with belts ranging from 1.5-2.0 inches in width. These two belt spacers can both be positioned above or below the belt, or split – thereby creating some height adjustability for the holster/pistol position. 4 screws securely connect the hanger to the holster body enable angle adjustment for personal preference. The Retention adjustment on the DAA MAX IDPA Holster is truly innovative.

An additional 6-tube Magazine Assembly for your Mini XL650 Case Feeder. It will hold about 150 pcs of 9mm brass, 130 pcs of .40 and about 120 pcs of .38S.

Conversion kits are available allowing you to use your Mr. Bulletfeeder by Double-Alpha for more than just one caliber. Many reloaders have a second complete tool head for their 2nd caliber of choice, voiding the need to reset the dies. To make the transition easy, the Mr. Bulletfeeder by Double-Alpha conversion kits includes a complete dropper assembly, a custom powder funnel (for pistol calibers) and a new collator plate for the caliber of choice. This will allow you to switch your bullet feeder from one caliber to the next in a matter of minutes. 

After a considerable amount of prototyping and testing, we are very pleased to offer you these conversion kits for the Mr.Bulletfeeder by DAA and the Mr.BulletFeeder PRO, which will convert your machine to a point-down feeder.

Using the Mr.BulletFeeder you already have, and the parts included in this kit, you will be able to quickly convert your unit back and forth between base-down or point-down feeding.

he DAA Output Chute can be attached to any reloading press, hanging onto the same bracket which usually holds the Akro-Bin, and replacing it.

The long, 120cm (4ft) feed spring enables you to run the ammo down to a container on the floor, sparing you the need to empty that bin as you reload, and uncluttering your reloading press.

Many PCC shooters use extended Glock Magazines, often with long base pads added for even more capacity.

To ensure the best possible retention in our Racer and Race Master mag pouches, we are pleased to offer this dedicated extended Glock Side spacer.

Simply assemble this spacer instead of your short one, and allow the bottom of your long mag to extend out the bottom of the pouch body, for a more balanced more secure retention.

The long spacer offers three hole positions in which to place the stopper, giving you the ability to experiment and decide for yourself what the best depth for your magazine is.

NOTE:  this spacer is not compatible with the Alpha-X line of pouches. Magazine and Magazine Pouch not inlucded!