Many PCC shooters use extended Glock Magazines, often with long base pads added for even more capacity.

To ensure the best possible retention in our Racer and Race Master mag pouches, we are pleased to offer this dedicated extended Glock Side spacer.

Simply assemble this spacer instead of your short one, and allow the bottom of your long mag to extend out the bottom of the pouch body, for a more balanced more secure retention.

The long spacer offers three hole positions in which to place the stopper, giving you the ability to experiment and decide for yourself what the best depth for your magazine is.

NOTE:  this spacer is not compatible with the Alpha-X line of pouches. Magazine and Magazine Pouch not inlucded!

DAA XL650/750 Debris-Out Casefeeder Adaptor, which replaces the original Dillon case feeder adaptor on your press, the slots cut in the pipe allow the debris to fall out the sides onto the small collection tray and the chances of a jam-up are greatly reduced.

The DAA Powder-Spill-Prevention (PSP) Brush is a simple yet efficient reloading accessory that solves a real issue: How to prevent small amounts of powder being spilled out of the case, as the tool head of the progressive reloading press indexes?

A cool, new, practical way to carry your Grip-Enhancer into action!

Many shooters like to carry their Grip Enhancer of choice on their belts, so they can apply it just before the “Load and make ready” command. And what is needed is a quick and secure carrying solution, which allows you fast access to the Grip Enhancer and a quick return to belt retention. The New DAA Magnetic Grip-Enhancer does just that – and in style!

Two super-strong magnets are fitted into the custom-made silicone belt and bottle attachments, clicking together and locking securely in place. Run, jump or spin – you wont accidentaly dislodge this holder. Yet a moderate tug/rotation motion and it will come away in your hand for quick application.

The DAA Magnetic Grip-Enhancer Holder is a perfect fit for a bottle of Progrip or for the new DAA GRIPZ lotion. (Any bottle of approx. 34-36mm in diameter could be held securely.)

Available in Black, Blue or Red colors.

Producing the perfect IPSC shooting pants has been a goal of ours at DAA for a long while. We have tried before several times, with varying degrees of success.

However now, with the new DAA SHOTAC Pants, we believe we have “hit the nail on the head!”.

Our SHOTAC Pant is made of lightweight, tough and durable rip-stop fabric, which provides ample flex and an extremely comfortable fit. The design and material choice allow you a comfortable range of motion, without appearing loose fitting or baggy. These pants do not look or feel like gym/sweat pants – but they provide as much flexibility and comfort as any sportswear!

The SHOTAC Pant features include:
- A self-adjusting tunnel waistband, with a full 2” range of fit
- An extra frontal pocket for that “load and make ready” magazine (or for your cell phone)
- Two large rear Velcro pockets
- Large, quick access angled side pockets
- Wide belt loops & double layered fabric in the belt area for increased comfort while wearing your shooting rig
- Double layered knee area, for increased durability
- Steel front snap with DAA logo. SHOTAC logo embroidered on back pocket flap
- Fade and stain resistant fabric, available in Black or Navy Blue.

Size Chart:
Small:            Waist: 30"-32"   Length 32"
Medium:        Waist: 32"-34"   Length 33"
Large:            Waist: 34"-36"   Length 34"
X-Large:        Waist: 36"-38"   Length 34"
XX-Large:     Waist: 38"-40"   Length 34"
XXX-Large:   Waist: 40"-42"   Length 34"

The DAA PRO Belt includes all the superior features of the long running DAA Competition Belt, and lifts them up a notch!
The quality and workmanship of this belt will make any owner proud! It features an attractive new dual-tone webbing on the outer belt and logo text on the inner. It includes a new unique name tag holder sewn into the outer belt webbing. You can now insert contact info and if you ever forget or lose your expensive rig, an honest finder can return it to you! A new rubberized DAA logo security loop completes this luxurious shooting belt.

The DAA PRO Belt is available in dual-tone Black, Blue, Red or Silver-Grey, with the color boldly displayed in the wide middle section of the belt. 

How to select the correct belt size: (do not select based on your pant size!)
1. Measure you actual waist circumference at the height where you plan to wear your belt.
2. Convert your measurements into Inches (1inch = 2.54cm)
3. Order the belt size which matches your measurement. Round upwards: if you measured 39”, order a belt size 40”.

The 11-Coil (125-140mm mags) DAA 2011 magazine springs are made from hi-quality spring wire, and carefully formed and manufactured to maximize reliability, capacity and longevity.

Fits Scorpion 9mm-type polymer magazines Ver #1 & Ver #2. The LULA loader & unloader is a military quality personal magazine loader and unloader. It facilitates both loading of loose rounds into a magazine and unloading them out of the magazine. It does so quickly, safely and comfortably. Usable for tens-of-thousands rounds.

The Wide 2" Belt Hanger for Alpha-X Pouches, is a complete fully-assembled belt hanger for the Alpha-X pouches – enabling the user to attach these pouches to a wider belt. The wide bracket and included spacers will accommodate up to a 2” wide belt, and the two ¼” spacers make it easy to use on a 1.75” belt or a 1.5” belt as well.

The hanger is complete, including the steel bracket on the back with the two removeable spacers, and the ball joint for attachment to the Alpha-X pouch body.

Pouch body and pouch-spacers are not included.

Warren Tactical Series sight design is void of sharp corners, serrations, undercuts, and odd angles because they are distracting!

The patented, curved rear profile, called the "Waive Design" and the radius corners of the rear notch combine to quickly direct the shooter's vision upward toward the front sight and the target / threat.

The Waive Design also allows faster "target to target" transitions. Plus, with the long outer corners of the rear sight removed, the shooter can see more of the target / threat area clearly. Front sight height: 5.5mm (0.215”) Front sight width: 3.2mm (0.125”)

The DAA Magnetic Powder Check 2.0 (US Pat. Pending) is a great addition to any progressive reloading machine, helping to ensure the quality and safety of your reloaded ammo. The unique new design uses a high-tech Reed Sensor and a magnet assembled to the plunger Rod, to assess if the charge in the case is of the correct height.

As any reloader knows, adjusting a die on a tightly spaced tool head can be difficult and aggravating. The die nuts and various machine parts do not allow easy access and using regular wrenches can be near impossible. The DAA 1 Inch Box-End Wrench is the solution to this problem! The custom made, laser cut, stainless steel wrench is strong enough to last a lifetime and thin-walled enough to fit between any dies for easy access and adjustment.

The Shell Sorter™ is a simple product designed to reduce the time spent sorting brass by caliber, allowing you to enjoy more time reloading and shooting.

The Sorter simply sits on top of a common 5 gallon bucket, with a few shakes your brass is sorted by caliber. The Shell Sorter™ is comprised of three pans designed to sort several common calibers.

The three main calibers that most reloaders sort are 45 ACP, 40 S&W, and 9mm. We have labeled the sorters according to those three main calibers. The sorters do sort many more calibers!

The fastest way to sort is to stack all three of the pans together with the yellow pan on top, and the black on the bottom, in that way all your brass is sorted at the same time.

If you sort before tumbling as is recommended, most shells that are inside of each other will come apart with the shaking and are sorted correctly. However, if you tumble first, those are likely to jam together with small bits of media, and sometimes those require pliers.

The sorters can also take the place of your media sifter. Just tumble, pour your brass into the appropriate sorter(s), shake a bit, your media is in the bucket, and your brass is ready for the next step.

You can use this on the range so that you only bring home brass in the calibers that you reload.

The Shell Sorter™ is made of ABS, a very strong plastic which will give a lifetime of service. We placed a sorter underneath a car tire, and it didn't break or distort! In fact, it still worked!

Always wear gloves and a dust mask when working with used brass because of the levels of lead dust present.

With Production Division on the rise and many shooters in this IPSC Division choosing a Kydex closed-body holster (and all USPSA Production shooters having to use it), creating a better Kydex holster is always high on our agenda. We believe in constantly striving to improve all our products, and the new innovations in the PDR PRO-II holster reflect that philosophy.

We took a long hard look at our PDR PRO holster, and combined with valuable customer feedback decided to make some changes to improve the product further.

>span class="s1">We upgraded this part from plastic to aluminum, and redesigned the manner in which the height adjustment and vertical lock-up is achieved. The PDR PRO-II now has a set screw in the ball itself, which can be accessed from its inner side, allowing you to adjust height to any position, not just in the predetermined 10 mm steps as before. Also this height adjustment can now be achieved without dismantling the holster and without losing any of the other settings.

>span class="s1"

>span class="s1">And of course the excellent features of the PDR PRO line have been retained: the slick fast unlined body, the advanced ball joint belt hanger with its wide range of adjustability, slim-line retention bars and spacers for use on competition belts ranging from 1.5”-2.0” in width.

Available only in Black, for right-handed or left-handed shooters.

Cleaning with wet Rotary Tumblers or Ultrasonics requires the correct solution for the correct cleaning application. Lyman has partnered with a renowned chemical research team to develop the right solutions for use with today's new Cleaners. The Turbo Sonic case cleaning solution was formulated to deliver premium results in cleaning cases inside and out. The 32oz. value sized concentrated solution is the ideal way to save while producing "like-new" results.

- Specially formulated for optimum cleaning results
- Concentrated
- Value Sized 32 oz.

A Primer Flip Tray is a “must have” item for most reloaders.

There are many on the market to choose from but here at DAA, we strive to design things better, and we believe we have succeed with our DAA Primer Flip Tray.

The DAA Primer Flip Tray is made larger than most, and square in shape, to make it easier to empty a box of primers onto the tray. Even the very large box of the popular Federal primers easily fits within the footprint of our tray.

Much experimentation and finetuning was done on the serrations to make the tray as efficient and fast to use as possible. Just a few shakes of the wrist will flip all your primers Anvil side up.

The tray is made from a tough translucent plastic material, making it possible to see the primers through the tray as you flip it over. Enabling you to keep the primers well spread out for easy pickup.

But the most unique and innovative feature of our primer tray, solves an irritating issue well known to all primer flip tray uses!

Other Primer Flip Trays all have a sharp cornered side-wall on their lids. Because of this, when primers are close up against the side-wall they are very difficult to pick up. This forces uses to shuffle the tray to move the primers away from the wall.

However, the lid of the DAA Primer Flip Tray has a side-wall which is a 45 degree angled slope. This allows you to easily pick up the primers even when they are tight up against the side wall of the lid, saving you valuable time as you fill your primer tubes.

The DAA Turbo Case-Feeder Plate is a highly modified and evolved reloading accessory which will greatly increase the output speed of your current Dillon case feeder. The plate is designed to handle all pistol calibers – from .380 to 0.45, so one plate can now handle all your pistol calibers!