The IDPA PDR PRO-II holster incorporates our latest generation Kydex holster body, as used in the popular PDR PRO-II holster. It is an efficient, fast holster body, available for many popular gun types for both right and left handed shooters.

The PDR-PRO-II holster body does not include the Suede lining that the PDR offers, making it more suitable for competition use, where speed and ease of draw are paramount. Attaching this PDR-PRO-II body to our Belt-Ride Ambidextrous Hanger, makes this holster a perfect choice for IDPA competitors or for general carry and range use. The bare Kydex cannot be beaten for speed, quick release and smooth draw. Tension adjustment is done by turning one, or both Phillips head screws, which are accessible from the outside of the holster body, while worn.

This hanger positions the holster body up close against the body and provides you a solid, yet tilt adjustable holster mount. It can be used with 1.5-2” wide belts and is fully ambidextrous, working equally well for RH or LH holsters. If you are using the belt spacers (most will, as most use a 1.5” belt) you can choose to have those spacers both above, below, or one above and one below the belt as you thread it through. This will provide you some height adjustment.

Available for right or left handed shooters, in Black only.

A common question we hear is “Can I use the Bullet Feeder on my 550?” Or “Can I use the Bullet Feeder and still continue to use my powder check on my 650?”.

Such Seating and Crimping dies are available, and so we decided it was time we made them directly available to our customers as well. LEE Precision produces these, so no question about the quality. 

The 2-in-1 Seating and crimping die include an O-ring lock machined into the nut, which allows you to hand tighten only – and the die stays put! They include a finger adjustable floating bullet seater. For durability they are heat treated to ideal hardness and polished to the smoothest finish.

The DAA Magnet Cover is a practical and super-attractive addition to your Rig!

Designed to perfectly fit on the DAA 48mm large magnets, this cover is custom made from durable nylon, rubber coated, and incorporates a laser-cut stainless-steel (430) DAA Logo.

The logo itself is what firmly holds the cover in place – being made of magnetic stainless-steel, and thus attracted to the magnet.

Most serious shooters carry one of these large magnets on their belts, as they are real time savers on pick-up stages. But let’s face is – those magnets can be a pain, picking up steel debris sticking to your car interior or those metal storage cupboards. 

Not anymore! 

This cover does not completely eliminate the magnetic pull, but it greatly reduces it to where it’s no longer an issue.

The magnetic pull through the cover is still just strong enough to hold a magazine during a Load or Unload procedure, but not strong enough to be trustworthy when running.

So leave the cover on until that stage in which you need your pick-up magnet, at which time you simply pop the cover off before the stage, and drop it in your pocket until after you’re done.

 Fast, simple, practical and very striking in appearance!

 * Magazine Pouch not included

Cleaning with wet Rotary Tumblers or Ultrasonics requires the correct solution for the correct cleaning application. Lyman has partnered with a renowned chemical research team to develop the right solutions for use with today's new Cleaners. The Turbo Sonic case cleaning solution was formulated to deliver premium results in cleaning cases inside and out. The 32oz. value sized concentrated solution is the ideal way to save while producing "like-new" results.

- Specially formulated for optimum cleaning results
- Concentrated
- Value Sized 32 oz.

The DAA Elbow pads are specifically designed to meet the needs of IPSC/IDPA shooters on the range. What is needed is a lightweight yet durable pad which offers the required protection when going prone, without adding bulk and without compromising the shooting position or making it less comfortable. The DAA Elbow pads deliver just that! 

The pads themselves are made of high density EVA foam, which offers longer life and better protection. The pads are in the form of small circular disks, which are tightly held together to offer seamless protection, while providing full flexibility and comfort of wear. The sleeves are made of 90% Polyester and 10% Spandex, to offer comfort and excellent fit. They are machine washable. Silicon piping is incorporated at the top and bottom edges of the sleeve, to ensure the elbow protection does not slide up or down while you shoot and move. 

Included is a set of two pads, black, with DAA logo.
Available in two sizes, to fit most.
Sizing note: choose M-L if you normally wear a Medium or Large top or choose XL-XXL if your shirt size is XL/XXL or larger.

Laser cut plastic logo inlays for the Alpha-X holster body and hanger. These inlays have 3M tape on their back for easy installation on the holster assembly.

Note that it is possible to remove the color inlays and swap them for a new color when desired. However, the old color inlay may break when removed.

DAA Premium Belts are sold as a set, including both the outer and inner belts. However, as most shooters know, an extra inner belt is a handy piece of kit. These inner belts are extremely practical for everyday use and perfect for air travel, as they include no metal and no buckle. Sold separately in Black only, in sizes from 28”-50”.

Note: The "Double Alpha Academy" font color on the inner belt is silver.

A cool, new, practical way to carry your Grip-Enhancer into action!

Many shooters like to carry their Grip Enhancer of choice on their belts, so they can apply it just before the “Load and make ready” command. And what is needed is a quick and secure carrying solution, which allows you fast access to the Grip Enhancer and a quick return to belt retention. The New DAA Magnetic Grip-Enhancer does just that – and in style!

Two super-strong magnets are fitted into the custom-made silicone belt and bottle attachments, clicking together and locking securely in place. Run, jump or spin – you wont accidentaly dislodge this holder. Yet a moderate tug/rotation motion and it will come away in your hand for quick application.

The DAA Magnetic Grip-Enhancer Holder is a perfect fit for a bottle of Progrip or for the new DAA GRIPZ lotion. (Any bottle of approx. 34-36mm in diameter could be held securely.)

Available in Black, Blue or Red colors.

CED has taken the BEST Range Bag on the market today to an entirely new level of design and function! The result is the new CED Deluxe Professional Range Bag! Starting with the famous CED Professional Range bag, we have added 25% more storage capacity to the new Deluxe Range Bag. Two additional zippered pockets have been added to the bag, one on each end. An over-sized ID holder has been incorporated into the top “U” shaped zippered closure, making it easy to locate and identify your bag. Each bag is made of rugged 600D Polyester weather resistant fabric, with strong chrome-plated metal hardware & heavy duty stitching. Finally, the CED Universal Pouch, attached to an accessory D-Ring on the end of the bag, round out the great features that make the CED Deluxe Professional Range Bag, the ultimate Range Bag to own! Quality! Design! Value! No other Range Bag comes close! * Main compartment locks completely with a "U" shaped top zipper design closure * Double headed zippers to provide locking capability * Seven (7) Magazine Holders * Elastic accessory straps added to hold those little "extras" * Holds up to four (4) Pistols securely * Removable Pistol Insert Sleeve * Ammo Brass Bag * Universal Pouch * Five (5) additional Zippered Pockets for magazine storage and small items * ID Tag Holder * Heavy Duty Chrome Hardware with Padded Shoulder Strap * Fully stitched Rubber Foot Pads to keep the bag dry * Overall Bag 54cm L x 28cm H x 36cm W  

Comes with mathcing color brass pouch and pistol sleeve. 

Overall Bag 54cm L x 28cm H x 36cm W / 21.5" L x 11" H x 14.5" W

Producing the perfect IPSC shooting pants has been a goal of ours at DAA for a long while. We have tried before several times, with varying degrees of success.

However now, with the new DAA SHOTAC Pants, we believe we have “hit the nail on the head!”.

Our SHOTAC Pant is made of lightweight, tough and durable rip-stop fabric, which provides ample flex and an extremely comfortable fit. The design and material choice allow you a comfortable range of motion, without appearing loose fitting or baggy. These pants do not look or feel like gym/sweat pants – but they provide as much flexibility and comfort as any sportswear!

The SHOTAC Pant features include:
- A self-adjusting tunnel waistband, with a full 2” range of fit
- An extra frontal pocket for that “load and make ready” magazine (or for your cell phone)
- Two large rear Velcro pockets
- Large, quick access angled side pockets
- Wide belt loops & double layered fabric in the belt area for increased comfort while wearing your shooting rig
- Double layered knee area, for increased durability
- Steel front snap with DAA logo. SHOTAC logo embroidered on back pocket flap
- Fade and stain resistant fabric, available in Black or Navy Blue.

Size Chart:
Small:            Waist: 30"-32"   Length 32"
Medium:        Waist: 32"-34"   Length 33"
Large:            Waist: 34"-36"   Length 34"
X-Large:        Waist: 36"-38"   Length 34"
XX-Large:     Waist: 38"-40"   Length 34"
XXX-Large:   Waist: 40"-42"   Length 34"

With Production Division on the rise and many shooters in this IPSC Division choosing a Kydex closed-body holster (and all USPSA Production shooters having to use it), creating a better Kydex holster is always high on our agenda. We believe in constantly striving to improve all our products, and the new innovations in the PDR PRO-II holster reflect that philosophy.

We took a long hard look at our PDR PRO holster, and combined with valuable customer feedback decided to make some changes to improve the product further.

>span class="s1">We upgraded this part from plastic to aluminum, and redesigned the manner in which the height adjustment and vertical lock-up is achieved. The PDR PRO-II now has a set screw in the ball itself, which can be accessed from its inner side, allowing you to adjust height to any position, not just in the predetermined 10 mm steps as before. Also this height adjustment can now be achieved without dismantling the holster and without losing any of the other settings.

>span class="s1"

>span class="s1">And of course the excellent features of the PDR PRO line have been retained: the slick fast unlined body, the advanced ball joint belt hanger with its wide range of adjustability, slim-line retention bars and spacers for use on competition belts ranging from 1.5”-2.0” in width.

Available only in Black, for right-handed or left-handed shooters.

In 2011 we introduce the all aluminum Race Master Magazine Pouches, the first of their kind. Their innovative design is so different from other model pouches, that all who used them were instantly fans.

However, their one shortcoming is their relative high price tag... A $60 pouch is not affordable by all, especially when you consider that you need 3 or 4 of them on your belt. So we set out to develop and produce a plastic molded version of this same winning design, and we are proud to introduce the all new DAA Racer Magazine Pouch, the perfect mate for the DAA Racer Holster!

The DAA Racer pouches borrow heavily from the Race Master Pouch. In fact, we took the very same body design, modified it to suite plastic mounding requirements, while maintaining the exact same unique “pressure from the back” adjustable holding system that has proven so successful. Interchangeable inserts allow you to go from larger 2011 mags to smaller CZ/Tan mags. A third pressure spacer is included for Glock and M&p mags.  A single stack spacer is available as an accessory as well.

The pouch is completely ambidextrous, allowing easy mounting for left hand or right had users. And you can even mount the pouch at 90deg away from the body, just as you can in the RM version.

Warren Tactical Series sight design is void of sharp corners, serrations, undercuts, and odd angles because they are distracting!

The patented, curved rear profile, called the "Waive Design" and the radius corners of the rear notch combine to quickly direct the shooter's vision upward toward the front sight and the target / threat.

The Waive Design also allows faster "target to target" transitions. Plus, with the long outer corners of the rear sight removed, the shooter can see more of the target / threat area clearly. Front sight height: 5.5mm (0.215”) Front sight width: 3.2mm (0.125”)