Double the capacity of your Dillon powder hopper with this clear PT extended Hopper. The Hopper measures 36cm long and replaces the 18cm long Dillon Original.

It assembles in the same way, using the two screws in place on the Dillon.

>span class="s1">An acrylic powder baffle is included with the extended hopper.

1050 users, please note: this hopper it too long to fit under the case feeder on your 1050. You will need to shorten it to fit. The tube can be shortened using a saw or serrated knife. About 9cm need to be cut off to fit under the 1050 case feeder.

The DAA Magnetic Powder Check 2.0 (US Pat. Pending) is a great addition to any progressive reloading machine, helping to ensure the quality and safety of your reloaded ammo. The unique new design uses a high-tech Reed Sensor and a magnet assembled to the plunger Rod, to assess if the charge in the case is of the correct height.

The DAA Dry-Fire Practice Magazine is designed to emulate as closely as possible the feel and performance of a fully loader real magazine. It allows you to dry-fire without introducing dummy loaded rounds to weigh down real magazines, which can be risky, and saves wear on your real mags.

The DAA Dry-Fire Swinger Target allows you to enrich you dry-fire experience adding a swinger – one of the least practiced targets, and one which many find challenging.

The IDPA PDR PRO-II holster incorporates our latest generation Kydex holster body, as used in the popular PDR PRO-II holster. It is an efficient, fast holster body, available for many popular gun types for both right and left handed shooters.

The PDR-PRO-II holster body does not include the Suede lining that the PDR offers, making it more suitable for competition use, where speed and ease of draw are paramount. Attaching this PDR-PRO-II body to our Belt-Ride Ambidextrous Hanger, makes this holster a perfect choice for IDPA competitors or for general carry and range use. The bare Kydex cannot be beaten for speed, quick release and smooth draw. Tension adjustment is done by turning one, or both Phillips head screws, which are accessible from the outside of the holster body, while worn.

This hanger positions the holster body up close against the body and provides you a solid, yet tilt adjustable holster mount. It can be used with 1.5-2” wide belts and is fully ambidextrous, working equally well for RH or LH holsters. If you are using the belt spacers (most will, as most use a 1.5” belt) you can choose to have those spacers both above, below, or one above and one below the belt as you thread it through. This will provide you some height adjustment.

Available for right or left handed shooters, in Black only.

DAA PRIMAFILL is a semi-automatic primer-tube filling solution, able to quickly and easily fill both Small and Large primer tubes. It allows you to switch between Small and Large primers instantly, without tools or assembly.

The DAA Case Lube is a result of much testing and experimentation to find the best performing formula. The non-aerosol spray-cap bottle is easy and efficient to use. 

A Primer Flip Tray is a “must have” item for most reloaders.

There are many on the market to choose from but here at DAA, we strive to design things better, and we believe we have succeed with our DAA Primer Flip Tray.

The DAA Primer Flip Tray is made larger than most, and square in shape, to make it easier to empty a box of primers onto the tray. Even the very large box of the popular Federal primers easily fits within the footprint of our tray.

Much experimentation and finetuning was done on the serrations to make the tray as efficient and fast to use as possible. Just a few shakes of the wrist will flip all your primers Anvil side up.

The tray is made from a tough translucent plastic material, making it possible to see the primers through the tray as you flip it over. Enabling you to keep the primers well spread out for easy pickup.

But the most unique and innovative feature of our primer tray, solves an irritating issue well known to all primer flip tray uses!

Other Primer Flip Trays all have a sharp cornered side-wall on their lids. Because of this, when primers are close up against the side-wall they are very difficult to pick up. This forces uses to shuffle the tray to move the primers away from the wall.

However, the lid of the DAA Primer Flip Tray has a side-wall which is a 45 degree angled slope. This allows you to easily pick up the primers even when they are tight up against the side wall of the lid, saving you valuable time as you fill your primer tubes.

Many customers choose to start reloading on their XL650/750 without the optional case feeder, and for them the new DAA Mini Case feeder will be a great addition to their press!

How to order the correct number of links:

1. Wear your current inner belt (if you don’t have one - use any thin belt).
2. Use a flexible tape-measure (or string) to measure your waist circumference on top of the inner belt.
3. Check size cart bellow to see how many you need
4. Select your links in any color combination.

You need an inner belt to use the Lynx system. If you don't have one, don't forget to order.

link to Inner belt

Part of what makes the Lynx belt so special is that it is made of individual links. This allows you to customize your belt, designing a one of a kind color scheme, choosing links of the 9 available colors. Design your belt to represent your National Flag, your shooting club or match your shooting uniform.

Here you can purchase individual links of any color and quantity, should you need to do so. 

Dimensions: links are 33mm long from pin to pin. 38.7mm tall, thickness on the Velcro pad is 8.8mm, 7mm off the pad

When buying Lynx belt a set of 50 roll pins is included, but if should you require more than that – you can purchase another bag of 50- Roll pins separately.

Handy little steel punch tool, designed to make removing the rolls pins quick and easy. Should you need to remove a link, or wish to insert another, removing the roll pin can be difficult without a punch tool. With this little tool, the task is easy, and being compact and lightweight lets you leave it in your range bag tool kit.

The DAA CED7000 EVA Case offers a custom-made solution to store and/or carry your CED7000 timer at the range or in your range bag. The case is constructed of sturdy, velvet-lined EVA, with a high quality zipper tracking around 3 sides.

The DAA Single Pistol Case offers a compact and affective storing and transport solution for one full size pistol. The EVA carbon-fiber-finish outer shell offers protection and durability, while the velvet-lined foam padding holds your pistol securely in place. The inner dimensions are large enough to accommodate any Production, Standard or Carry Optics pistol we tested with. However, it will be too small for a full-size Open Pistol.