Lets you hear what you need to hear. Protects you from what you don't. 

Enter the ZemZone where loud damaging noise is suppressed yet you can hear the conversation of others around you. You will improve your concentration, be more productive and feel better at the end of the day. The ZemZone. It's the safe sound world for your ears.  A quiet revolution at work, at play, at home Improved Performance 

• High noise reduction across all frequencies
• No distortion of sound
• Blocks harmful noise but allows speech and other useful sounds to be heard

Greater Comfort

• Lightweight (less than 2 ounces)
• Adjustable head band
• Comfortable for extended use

Increased Safety

• High speech intelligibility
• Hear shouts or warning signals
• No need to remove hearing protection to have a conversation

Convenient

• Folds for easy storage in shirt pocket      or
• Drop around the neck while not in use

The Wide 2" Belt Hanger for Alpha-X Pouches, is a complete fully-assembled belt hanger for the Alpha-X pouches – enabling the user to attach these pouches to a wider belt. The wide bracket and included spacers will accommodate up to a 2” wide belt, and the two ¼” spacers make it easy to use on a 1.75” belt or a 1.5” belt as well.

The hanger is complete, including the steel bracket on the back with the two removeable spacers, and the ball joint for attachment to the Alpha-X pouch body.

Pouch body and pouch-spacers are not included.

Warren Tactical Series sight design is void of sharp corners, serrations, undercuts, and odd angles because they are distracting!

The patented, curved rear profile, called the "Waive Design" and the radius corners of the rear notch combine to quickly direct the shooter's vision upward toward the front sight and the target / threat.

The Waive Design also allows faster "target to target" transitions. Plus, with the long outer corners of the rear sight removed, the shooter can see more of the target / threat area clearly. Front sight height: 5.5mm (0.215”) Front sight width: 3.2mm (0.125”)

An additional 6-tube Magazine Assembly for your Mini XL650 Case Feeder.

It will hold about 150 pcs of 9mm brass, 130 pcs of .40 and about 120 pcs of .38S.

Tip:

- When filling the tubes, rotate the base of the assembly so that it is positioned between tubes- that way none of the columns line up with the hole in the bottom – and the brass won’t fall out prematurely.

This new exciting product from Maglula is the most compact and versatile AR15 loader ever introduced. The StripLula will fit all plastic and metal AR15 magazines, clip onto the top lips and allow you to quickly and effortlessly load your mags.

It can be used to load ammo packed in stripper clips (12 seconds to load 30 rounds) or it can be used to load individual rounds(40 seconds to load 30 rounds).

It can even be used as a simply unloader, allowing the unloading of a 30 round magazine in 15 seconds flat.

If you shoot an AR15 – you’ve to have one of these!

A silicone cloth is one of the most useful items to have in your range bag. It has multiple applications for IPSC shooters: 

First and foremost it can be used to improve the feeding reliability of your magazines. Many top US shooters run their bullets through the silicone rag before loading the ammo into the magazine. When slightly coated with silicone, the bullets roll better in the magazines, and magazine feeding problems are eliminated. You can also run the silicone cloth through your mag tube when cleaning. 

Use the cloth to wipe down the outside of your gun and magazines to prevent rust and remove finger marks. 

The silicone cloths come packed in individual zip bags which prevent the rag from drying out. 

Only 4 Euro each, or take advantage of our promotional price - and order a pack of 5 for the price of 4 (see Combo: Silicone Cloth 5 Pack).

Producing the perfect IPSC shooting pants has been a goal of ours at DAA for a long while. We have tried before several times, with varying degrees of success.

However now, with the new DAA SHOTAC Pants, we believe we have “hit the nail on the head!”.

Our SHOTAC Pant is made of lightweight, tough and durable rip-stop fabric, which provides ample flex and an extremely comfortable fit. The design and material choice allow you a comfortable range of motion, without appearing loose fitting or baggy. These pants do not look or feel like gym/sweat pants – but they provide as much flexibility and comfort as any sportswear!

The SHOTAC Pant features include:
- A self-adjusting tunnel waistband, with a full 2” range of fit
- An extra frontal pocket for that “load and make ready” magazine (or for your cell phone)
- Two large rear Velcro pockets
- Large, quick access angled side pockets
- Wide belt loops & double layered fabric in the belt area for increased comfort while wearing your shooting rig
- Double layered knee area, for increased durability
- Steel front snap with DAA logo. SHOTAC logo embroidered on back pocket flap
- Fade and stain resistant fabric, available in Black or Navy Blue.

Size Chart:
Small:            Waist: 30"-32"   Length 32"
Medium:        Waist: 32"-34"   Length 33"
Large:            Waist: 34"-36"   Length 34"
X-Large:        Waist: 36"-38"   Length 34"
XX-Large:     Waist: 38"-40"   Length 34"
XXX-Large:   Waist: 40"-42"   Length 34"

The Shell Sorter™ is a simple product designed to reduce the time spent sorting brass by caliber, allowing you to enjoy more time reloading and shooting.

The Sorter simply sits on top of a common 5 gallon bucket, with a few shakes your brass is sorted by caliber. The Shell Sorter™ is comprised of three pans designed to sort several common calibers.

The three main calibers that most reloaders sort are 45 ACP, 40 S&W, and 9mm. We have labeled the sorters according to those three main calibers. The sorters do sort many more calibers!

The fastest way to sort is to stack all three of the pans together with the yellow pan on top, and the black on the bottom, in that way all your brass is sorted at the same time.

If you sort before tumbling as is recommended, most shells that are inside of each other will come apart with the shaking and are sorted correctly. However, if you tumble first, those are likely to jam together with small bits of media, and sometimes those require pliers.

The sorters can also take the place of your media sifter. Just tumble, pour your brass into the appropriate sorter(s), shake a bit, your media is in the bucket, and your brass is ready for the next step.

You can use this on the range so that you only bring home brass in the calibers that you reload.

The Shell Sorter™ is made of ABS, a very strong plastic which will give a lifetime of service. We placed a sorter underneath a car tire, and it didn't break or distort! In fact, it still worked!

Always wear gloves and a dust mask when working with used brass because of the levels of lead dust present.

With Production Division on the rise and many shooters in this IPSC Division choosing a Kydex closed-body holster (and all USPSA Production shooters having to use it), creating a better Kydex holster is always high on our agenda. We believe in constantly striving to improve all our products, and the new innovations in the PDR PRO-II holster reflect that philosophy.

We took a long hard look at our PDR PRO holster, and combined with valuable customer feedback decided to make some changes to improve the product further.

>span class="s1">We upgraded this part from plastic to aluminum, and redesigned the manner in which the height adjustment and vertical lock-up is achieved. The PDR PRO-II now has a set screw in the ball itself, which can be accessed from its inner side, allowing you to adjust height to any position, not just in the predetermined 10 mm steps as before. Also this height adjustment can now be achieved without dismantling the holster and without losing any of the other settings.

>span class="s1"

>span class="s1">And of course the excellent features of the PDR PRO line have been retained: the slick fast unlined body, the advanced ball joint belt hanger with its wide range of adjustability, slim-line retention bars and spacers for use on competition belts ranging from 1.5”-2.0” in width.

Available only in Black, for right-handed or left-handed shooters.

Some Mr.BulletFeeder users have asked for the option to extend the output feed spring, to allow them to position the collator further away, or perhaps position one collator between two presses and use it to alternately feed each machine.

To meet this request we are pleased to offer the output springs and a screw-on adaptor cap which will allow you to attach to your current spring and extend it up to another 38cm.

 Two sizes are available. The Small (10mm inner diameter) matches the springs used with the rifle caliber machinesand the large size (12mm inner diameter) as shipped with the pistol calibers.

 Note that some “do it yourself” supports for the spring will be needed to prevent it sagging under the weight of the bullets. You do need to keep the tube running downwards and prevent bullets from “pooling” in a sagging loop.

Some Mr.BulletFeeder users have asked for the option to extend the output feed spring, to allow them to position the collator further away, or perhaps position one collator between two presses and use it to alternately feed each machine.

To meet this request we are pleased to offer the output springs and a screw-on adaptor cap which will allow you to attach to your current spring and extend it up to another 38cm.

 Two sizes are available. The Small (10mm inner diameter) matches the springs used with the rifle caliber machines and the large size (12mm inner diameter) as shipped with the pistol calibers.

 Note that some “do it yourself” supports for the spring will be needed to prevent it sagging under the weight of the bullets. You do need to keep the tube running downwards and prevent bullets from “pooling” in a sagging loop.

A replacement threaded die body for your Mr.Bulletfeeder by DAA Dropper. This threaded body is compatible with all calibers.

MR.BULLETFEEDER BY DAA POWDER FUNNEL - DILLON

The 2018 Hanger Assembly for the Mr.Bulletfeeder by DAA ships as standard with all new units leaving DAA as of Jan 2018.

Should you wish to upgrade your current hanger assembly (the one with the round Delrin pucks and aluminum rods) you can do so by purchasing this new hanger separately. It is reverse-compatible with all previous Mr.Bulletfeeder by DAA units.

The new hanger is a simplified design, which makes assembly and adjustments to the tilt angle easier and faster to make. The Horizontal aluminum bracket clamps directly onto the motor gear box, allowing for easy assembly on either the left or the right side of the collator, to accommodate your specific position mounting needs.

The vertical piece hangs over the side of your case feeder, and connects to the horizontal bracket by means of a large M8 bolt, which can be loosened and rotated for tilt adjustments.

Sturdy attachment to the collator, a simplified design with fewer parts, thick aluminum profiles and way fewer screws make this hanger simpler and easier to setup and adjust.

Note: Machine NOT included - only Hanger.