DAA IPSC Scoring Overlay Gauge is made of sturdy 0.75mm thick hard transparent plastic, these overlay gauges are a “must have item” in every range bag! 
They are the size of standard credit cards and so fit easily into any wallet or pocket. 
Include precisely drawn caliber circles and a handy 50mm side ruler for measuring gear’s distance from the body.

The DAA Magnet Cover is a practical and super-attractive addition to your Rig!

Designed to perfectly fit on the DAA 48mm large magnets, this cover is custom made from durable nylon, rubber coated, and incorporates a laser-cut stainless-steel (430) DAA Logo.

The logo itself is what firmly holds the cover in place – being made of magnetic stainless-steel, and thus attracted to the magnet.

Most serious shooters carry one of these large magnets on their belts, as they are real time savers on pick-up stages. But let’s face is – those magnets can be a pain, picking up steel debris sticking to your car interior or those metal storage cupboards. 

Not anymore! 

This cover does not completely eliminate the magnetic pull, but it greatly reduces it to where it’s no longer an issue.

The magnetic pull through the cover is still just strong enough to hold a magazine during a Load or Unload procedure, but not strong enough to be trustworthy when running.

So leave the cover on until that stage in which you need your pick-up magnet, at which time you simply pop the cover off before the stage, and drop it in your pocket until after you’re done.

 Fast, simple, practical and very striking in appearance!

 * Magazine Pouch not included

The DAA 1911/2011 Ambidextrous Safeties with Shields are precision-made stainless-steel Safeties made with state-of-art Metal Injection Molding (MIM) technology. They are designed for use on any 2011 or 1911 pistol, with some minor fitting required. It is always recommended to have a competent Gun Smith fit safeties!

DAA Replacement Foam Inserts (2pcs) of precut replacement foam pads for most earmuffs. Tested to be a perfect fit in Sordins and Peltor models, these should work equally well in pretty much any ear protection earmuffs.

Replace those old dirty, smelly foam pieces with a new fresh set at minimum cost. These foam inserts are pocketed on the back side to allow space for speaker units as used in electronic sets. The dense foam offers excellent sound damping and the black colored surface treatment increases durability of the foam pads.

The 22UpLULA™ loader & unloader is made for loading .22LR wide body mags. 1/2”, like .22LR 1911 mags and other .22LR converted mags. It has the body width of our UpLULA™and has a narrower metal beak designed for .22LR rounds.

(It will not load .380 to .45 cal. mags. !)

As most serious IPSC and USPSA pistol shooters know, preventing slip in your grip is of utmost important for high-speed accurate shooting. A grip-enhancement lotion is one of the best ways to achieve that anti-slip, without the need to apply excessive force to the grip. Especially in wet conditions or in extreme heat, sweating palms can really hurt your performance. But with a few drops of the new GRIPZ by DAA, applied just before you shoot, your palms remain dry and your grip secure.

GRIPZ by DAA is a grip enhancer designed by shooters for Shooters. Supplied in a plastic bottle with a practical “Snap-cap” type closure, that ensures a good seal and quick, easy, one-handed access when needed. GRIPZ by Double Alpha does not dry as white in color as other competing products, and will not rub off as easily onto your clothing and pistol grip. It will be cleaner to use than other leading grip-enhancers popular in our sport.

GRIPZ is silica based grip-lotion, diluted with alcohol and stabilizers for the ultimate performance and longevity. Each bottle holds 75ml (some 20% more than competing products).

Laser cut plastic logo inlays for the Alpha-X holster body and hanger. These inlays have 3M tape on their back for easy installation on the holster assembly.

Note that it is possible to remove the color inlays and swap them for a new color when desired. However, the old color inlay may break when removed.

Uplula, divice to load and unload your magazines. Easy and quick loading and unloading. The UpLULA loader is a military quality personal universal pistol magazine loader. Easy and quick loading. Rounds just drop in with no fingers pushing or forcing the rounds.
Up to one round per sec. loading rate, with some practice.
Fits in your hand and pocket, weighs only 66 grams (2.3 Ounce).
Highly durable - constructed of the best reinforced polymer.
No more strain or pain when loading those mags!

The DAA Universal Cleaning Kit is a truly comprehensive kit including all you need to maintain both rifles and pistols. The kits in designed to support 6 calibers, including these rifle calibers: 0.177, 0.223, 0.308 , and these pistol calibers: 9mm, 0.40 and 0.45.

The kit is packed in a sturdy Tactical-type case, made of heavy-duty D-600 material and including a large top-quality wrap-around zipper. Zipper heads have long cord heads for easy access. The case itself is Molle-ready, and can be attached on the outside of many bags and tactical packs. Multiple Molle-Pattern Velcro tabs on the front, allow you to add name tags, patches or other small attachment items. The case includes a rubberized DAA logo on a front Velcro tab.

Inside the kit is a multitude of accessories, all  neatly packed and held in place with dedicated pockets and straps. The kit includes the following items:

• The tactical case itself
• A large leak-proof bottle for the oil/solvent of your choice (supplied empty)
• A large bristle brush with wooden handle
• A plastic/rubber cleaning rod handle, which doubles as the pull through handle for the flexible cables
• Two flexible rubber-protected cables for rifle barrel pull though cleaning. With brass threaded ends
• Two bags of cleaning patches
• Three-piece set of Utility double-end brushes (Steel, Brass, Nylon)
• 4-piece Plastic Hook set
• Double-end Steel dental tool
• Rod for pistol barrel cleaning
• 6 pcs of bronze cleaning brushes, in the supported calibers
• 6 pcs of mop cleaning attachments, in the supported calibers
• 2 pcs patch holders (large and small)
• 3 pcs brass jags, in the supported pistol calibers

The Range BenchLoader™ loaders is a heavy-duty industrial 5.56 / .223 cal magazine loaders made to load a magazine in a single hand stroke. It is intended for daily loading of hundreds of magazines at shooting ranges and armories. It totally eliminates fingers pain and injury, shorten loading time, and keep the magazines lips intact.

Loads all AR15 / M4 compatible 5.56 / .223 magazines, like:
- M16 / AR15 / M4 USGI (NATO STANAG 4179)
- Magpul PMAG
- SCAR 16
- H&K metal 416 / SA80
- SureFire 60 & 100 rd
- Beretta AR 70-90
- Lancer *
- and all others

Dry-firing is one of the most effective methods to improve you shooting skills. It is cheap – no ammo is required. It is convenient – you can do it in the comfort of your home (don’t let the neighbors see you…). And it is an excellent way to build subconscious skills without the distractions creates by target feedback – good or bad hits. But in order to make your dry-fire practice as productive as possible, it needs to be as realistic as possible. You need to use YOUR gear, your holster and gun, and you need to make sure that you do GOOD practice only. Which means pulling the trigger only when the sight picture is correct!

- IPSC: This DAA Dry-Fire Target Set consists of 20(!) precisely scaled down IPSC Classic targets. When placed on a wall at a distance of 2.5-3 meters, they will serve to simulate targets at distances of 15, 20 and 30 meters.

- USPSA: This DAA Dry-Fire Target Set consists of 17(!) precisely scaled down USPSA Metric targets. When placed on a wall at a distance of 2.5-3 meters, they will serve to simulate targets at distances of 15, 20 and 30 meters.

A common question we hear is “Can I use the Bullet Feeder on my 550?” Or “Can I use the Bullet Feeder and still continue to use my powder check on my 650?”.

Such Seating and Crimping dies are available, and so we decided it was time we made them directly available to our customers as well. LEE Precision produces these, so no question about the quality. 

The 2-in-1 Seating and crimping die include an O-ring lock machined into the nut, which allows you to hand tighten only – and the die stays put! They include a finger adjustable floating bullet seater. For durability they are heat treated to ideal hardness and polished to the smoothest finish.

Handy little steel punch tool, designed to make removing the rolls pins quick and easy. Should you need to remove a link, or wish to insert another, removing the roll pin can be difficult without a punch tool. With this little tool, the task is easy, and being compact and lightweight lets you leave it in your range bag tool kit.

The BabyUpLULA loader is a military quality personal pistol magazine loader for 0.22 to .380 caliber rounds. It is a radical new design, which allows for easy and smooth loading of practically ALL single and double stack pistol magazines in these small calibers (for larger calibers use the UPLULA).

While loading you can support the base of the magazine on your body/thigh or on a table when available.

Features:
- Loads all .22-.380 caliber magazines- No inserts, spacers or adjustments at all! One size fits all.
- Easy and quick loading; Rounds just drop in with no fingers pushing or forcing the rounds.
- Up to one round per sec. loading rate, with some practice.
- Fits in your hand and pocket, weighs only 50 grams.
- Highly durable - constructed of the best reinforced polymer.
- No more strain or pain when loading those mags!
- Load hundreds of rounds, easily.

Does not load the following:
Converted .22 mags. .22L
Kimber .22 .22LR
S&W 22A/22S .22LR
Beretta U22 NEOS .22LR
Walther P22 .22LR
Browning .380 BDA .380
Beretta 84 .380 .380
Beretta 81 .32 .32
Tuaras PT380 .380
Colt ACE .22LR
GSG 1911 .22LR
Ruger SR22 .22LR

A set of 4 fiber reinforced hard-nylon hooks, perfect for reaching into those hard-to-get-to corners and indents in your firearms, for cleaning and maintenance.

The plastic material used ensures that there is no risk of scratching or damaging your valuable firearm parts as you work on it. The assortment of end tips and shapes provides you with options to find the best form for the job at hand.

Packed in a plastic sleeve, with a cardboard header, suitable for display hanging.

Some shooters prefer to have a muzzle support on their competition holster. This is an indisputable fact.

While most users will find that the Race Master holster functions perfectly without the additional muzzle support, there are some added advantages to using this extension: The muzzle support prevents the gun from being dislodged upwards, which could happen if bumped on the shooters thigh, or against a prop, during a walkthrough. If the holster was left unlocked, the gun can be dislodged. The muzzle support prevents this from happening.

The DAA Single Stack Magnetic Pouch is our latest magnetic pouch design, offering an ultra-compact and ultra-efficient magazine holding system for single stack shooters.

It positions the magazine only in the 90 deg “away from the body position” and is an excellent option for shooters who choose to carry their magazines this way, as many single stack shooters do.

The DAA Single Stack Magnetic Pouch utilizes two small yet powerful magnets that hold the magazine firmly in place while allowing it to rest inside its supporting track. The track guides the magazine in and out of the pouch and prevents it from accidentally being dislodged. The release achieved from this magnetic pouch is the smoothest of any of our magnetic pouches, partly due to the smaller contact area with the single stack magazines.

The belt hanger is the same as that used in the Racer pouches - the same minimalist steel plate design which eliminates separation between your inner and outer belt. The pouch can be adjusted for tilt in very small steps, allowing you to find your preferred angle. Once the correct angle is set and the center screw tightened, the serrations in the connector piece lock up, preventing any possibility of the pouch rotating until the center screw is loosened several turns.

* This is a blank Alpha-X holster aseembly only. If you require it with an insert, go the to full holster product page.

The IDPA PDR PRO-II holster incorporates our latest generation Kydex holster body, as used in the popular PDR PRO-II holster. It is an efficient, fast holster body, available for many popular gun types for both right and left handed shooters.

The PDR-PRO-II holster body does not include the Suede lining that the PDR offers, making it more suitable for competition use, where speed and ease of draw are paramount. Attaching this PDR-PRO-II body to our Belt-Ride Ambidextrous Hanger, makes this holster a perfect choice for IDPA competitors or for general carry and range use. The bare Kydex cannot be beaten for speed, quick release and smooth draw. Tension adjustment is done by turning one, or both Phillips head screws, which are accessible from the outside of the holster body, while worn.

This hanger positions the holster body up close against the body and provides you a solid, yet tilt adjustable holster mount. It can be used with 1.5-2” wide belts and is fully ambidextrous, working equally well for RH or LH holsters. If you are using the belt spacers (most will, as most use a 1.5” belt) you can choose to have those spacers both above, below, or one above and one below the belt as you thread it through. This will provide you some height adjustment.

Available for right or left handed shooters, in Black only.

The DAA Carbon 1911 Grips are 0.250 inch thick panels which create a surface that provides the flawless grip so critical for recoil control. The carbon offers a striking hi-tech appearance, and unparalleled durability. 
The tactical design includes a wide, deep, thumb cutaway which allows you unrestricted access to any mag-catch installed on your 1911. 

The CNC machined Carbon material is light weight extremely touch and is totally resistant to oils and solvents. 

These carbon grip panels offer not only improved performance when shooting your 1911, but also an attractive dark-colored carbon “techy” appearance. 

Each set include 4 stainless steel torx screws, with a custom head design, a torx key and are packed in a display-friendly blister-pack.

Simply the fastest and most convenient way to clean your gun barrel, be it a pistol, a rifle or a shotgun. Simply drop the weighted end down the barrel, from breach to muzzle and pull through. Do so with or without solvent, as best suites you needs. One pull runs a copper bristle brush as well as a wide long swab down the length of your barrel. You do not even have to disassemble the weapon to clean! Can be complete in seconds, and your barrel will be ready for another session on the range or in the field.