Select your country here
Please select your country
Il carrello è vuoto
Nessun elemento trovato che soddisfa i criteri di ricerca
Made of sturdy 0.75mm thick hard transparent plastic, these overlay gauges are a “must have item” in every range bag! They are the size of standard credit cards and so fit easily into any wallet or pocket. Include precisely drawn caliber circles and a handy 50mm side ruler for measuring gear’s distance from the body.
The DAA Magnet Cover is a practical and super-attractive addition to your Rig!
Designed to perfectly fit on the DAA 48mm large magnets, this cover is custom made from durable nylon, rubber coated, and incorporates a laser-cut stainless-steel (430) DAA Logo.
The logo itself is what firmly holds the cover in place – being made of magnetic stainless-steel, and thus attracted to the magnet.
Most serious shooters carry one of these large magnets on their belts, as they are real time savers on pick-up stages. But let’s face is – those magnets can be a pain, picking up steel debris sticking to your car interior or those metal storage cupboards.
Not anymore!
This cover does not completely eliminate the magnetic pull, but it greatly reduces it to where it’s no longer an issue.
The magnetic pull through the cover is still just strong enough to hold a magazine during a Load or Unload procedure, but not strong enough to be trustworthy when running.
So leave the cover on until that stage in which you need your pick-up magnet, at which time you simply pop the cover off before the stage, and drop it in your pocket until after you’re done.
Fast, simple, practical and very striking in appearance!
* Magazine Pouch not included
The DAA 1911/2011 Ambidextrous Safeties with Shields are precision-made stainless-steel Safeties made with state-of-art Metal Injection Molding (MIM) technology. They are designed for use on any 2011 or 1911 pistol, with some minor fitting required. It is always recommended to have a competent Gun Smith fit safeties!
The 22UpLULA™ loader & unloader is made for loading .22LR wide body mags. 1/2”, like .22LR 1911 mags and other .22LR converted mags. It has the body width of our UpLULA™and has a narrower metal beak designed for .22LR rounds.(It will not load .380 to .45 cal. mags. !)The 22UpLULA™ loader loads the following mags:Single Stack / 1911-wide1911 – Advantage Arms SS 10rdGSG-1911 10rd (Made in Germany) SSGSG -Colt Conversion kit mag 1911 Govt 10rd steel SSKimber – SSNightHawk Custom .22 Conv mag SSSIG – 220 SSWilson Combat polymer 422M-P 10rd SSDouble Stack / wide bodyBeretta – M92/96 10rdCZ – 75 Kadet 10rdGlock 17-22 – Advantage ArmsGlock – Advantage ArmsGlock – Advantage ArmsGlock 19-23 – Advantage ArmsGlock – Advantage ArmsGlock – Advantage ArmsPara – Advantage ArmsSIG – 228/229SIG – 226STI – Advantage ArmsTanfoglio Force 22 L & PTS TSG-22 10rdTS TSG-22 15rdWitness 9/40 10rd STD22
As most serious IPSC and USPSA pistol shooters know, preventing slip in your grip is of utmost important for high-speed accurate shooting. A grip-enhancement lotion is one of the best ways to achieve that anti-slip, without the need to apply excessive force to the grip. Especially in wet conditions or in extreme heat, sweating palms can really hurt your performance. But with a few drops of the new GRIPZ by DAA, applied just before you shoot, your palms remain dry and your grip secure.
GRIPZ by DAA is a grip enhancer designed by shooters for Shooters. Supplied in a plastic bottle with a practical “Snap-cap” type closure, that ensures a good seal and quick, easy, one-handed access when needed. GRIPZ by Double Alpha does not dry as white in color as other competing products, and will not rub off as easily onto your clothing and pistol grip. It will be cleaner to use than other leading grip-enhancers popular in our sport.
GRIPZ is silica based grip-lotion, diluted with alcohol and stabilizers for the ultimate performance and longevity. Each bottle holds 75ml (some 20% more than competing products).
Uplula, divice to load and unload your magazines. Easy and quick loading and unloading. The UpLULA loader is a military quality personal universal pistol magazine loader. Easy and quick loading. Rounds just drop in with no fingers pushing or forcing the rounds. Up to one round per sec. loading rate, with some practice. Fits in your hand and pocket, weighs only 66 grams (2.3 Ounce). Highly durable - constructed of the best reinforced polymer. No more strain or pain when loading those mags!
Laser cut plastic logo inlays for the Alpha-X holster body and hanger. These inlays have 3M tape on their back for easy installation on the holster assembly.
Note that it is possible to remove the color inlays and swap them for a new color when desired. However, the old color inlay may break when removed.
The DAA Universal Cleaning Kit is a truly comprehensive kit including all you need to maintain both rifles and pistols. The kits in designed to support 6 calibers, including these rifle calibers: 0.177, 0.223, 0.308 , and these pistol calibers: 9mm, 0.40 and 0.45.
The kit is packed in a sturdy Tactical-type case, made of heavy-duty D-600 material and including a large top-quality wrap-around zipper. Zipper heads have long cord heads for easy access. The case itself is Molle-ready, and can be attached on the outside of many bags and tactical packs. Multiple Molle-Pattern Velcro tabs on the front, allow you to add name tags, patches or other small attachment items. The case includes a rubberized DAA logo on a front Velcro tab.
Inside the kit is a multitude of accessories, all neatly packed and held in place with dedicated pockets and straps. The kit includes the following items:
The Range BenchLoader™ loaders is a heavy-duty industrial 5.56 / .223 cal magazine loaders made to load a magazine in a single hand stroke. It is intended for daily loading of hundreds of magazines at shooting ranges and armories. It totally eliminates fingers pain and injury, shorten loading time, and keep the magazines lips intact.Loads all AR15 / M4 compatible 5.56 / .223 magazines, like:- M16 / AR15 / M4 USGI (NATO STANAG 4179)- Magpul PMAG- SCAR 16- H&K metal 416 / SA80- SureFire 60 & 100 rd- Beretta AR 70-90- Lancer *- and all others
A set of 4 fiber reinforced hard-nylon hooks, perfect for reaching into those hard-to-get-to corners and indents in your firearms, for cleaning and maintenance.
The plastic material used ensures that there is no risk of scratching or damaging your valuable firearm parts as you work on it. The assortment of end tips and shapes provides you with options to find the best form for the job at hand.
Packed in a plastic sleeve, with a cardboard header, suitable for display hanging.
The BabyUpLULA loader is a military quality personal pistol magazine loader for 0.22 to .380 caliber rounds. It is a radical new design, which allows for easy and smooth loading of practically ALL single and double stack pistol magazines in these small calibers (for larger calibers use the UPLULA).While loading you can support the base of the magazine on your body/thigh or on a table when available.Features:- Loads all .22-.380 caliber magazines- No inserts, spacers or adjustments at all! One size fits all.- Easy and quick loading; Rounds just drop in with no fingers pushing or forcing the rounds.- Up to one round per sec. loading rate, with some practice.- Fits in your hand and pocket, weighs only 50 grams.- Highly durable - constructed of the best reinforced polymer.- No more strain or pain when loading those mags!- Load hundreds of rounds, easily.Does not load the following:Converted .22 mags. .22LKimber .22 .22LRS&W 22A/22S .22LRBeretta U22 NEOS .22LRWalther P22 .22LRBrowning .380 BDA .380Beretta 84 .380 .380Beretta 81 .32 .32Tuaras PT380 .380Colt ACE .22LRGSG 1911 .22LRRuger SR22 .22LR
Simply the fastest and most convenient way to clean your gun barrel, be it a pistol, a rifle or a shotgun. Simply drop the weighted end down the barrel, from breach to muzzle and pull through. Do so with or without solvent, as best suites you needs. One pull runs a copper bristle brush as well as a wide long swab down the length of your barrel. You do not even have to disassemble the weapon to clean! Can be complete in seconds, and your barrel will be ready for another session on the range or in the field.
Some shooters prefer to have a muzzle support on their competition holster. This is an indisputable fact.While most users will find that the Race Master holster functions perfectly without the additional muzzle support, there are some added advantages to using this extension: The muzzle support prevents the gun from being dislodged upwards, which could happen if bumped on the shooters thigh, or against a prop, during a walkthrough. If the holster was left unlocked, the gun can be dislodged. The muzzle support prevents this from happening.
The DAA Single Stack Magnetic Pouch is our latest magnetic pouch design, offering an ultra-compact and ultra-efficient magazine holding system for single stack shooters.It positions the magazine only in the 90 deg “away from the body position” and is an excellent option for shooters who choose to carry their magazines this way, as many single stack shooters do.The DAA Single Stack Magnetic Pouch utilizes two small yet powerful magnets that hold the magazine firmly in place while allowing it to rest inside its supporting track. The track guides the magazine in and out of the pouch and prevents it from accidentally being dislodged. The release achieved from this magnetic pouch is the smoothest of any of our magnetic pouches, partly due to the smaller contact area with the single stack magazines.The belt hanger is the same as that used in the Racer pouches - the same minimalist steel plate design which eliminates separation between your inner and outer belt. The pouch can be adjusted for tilt in very small steps, allowing you to find your preferred angle. Once the correct angle is set and the center screw tightened, the serrations in the connector piece lock up, preventing any possibility of the pouch rotating until the center screw is loosened several turns.
* This is a blank Alpha-X holster aseembly only. If you require it with an insert, go the to full holster product page.
In recent years Double-Alpha Academy's competition holsters have been setting the benchmark for advanced design and cutting-edge performance. The Race Master Holster has become the go-to competition holster worldwide for many top Champion shooters in our sport.
Double-Alpha is known for not standing still, and over time the Race Master Holster has been improved. Upgrades and refinements were made to its hanger system and more recently, to the patented insert block, making it magnetic and improving its performance further.
And now, over the past few months, DAA has been working on the next generation holster. We are very proud to introduce the Alpha-X holster!
The ALPHA-X was born of years of experience and market feedback, looking to take the Race Master Holster even further, creating a new fresh, striking look and adding several meaningful performance upgrades.
New Ball Joint and Lock-Up Mechanism
The ball joint of the Alpha-X offers a wide range of motion, allowing you to position your holster at just the right angle. This holster uses a much larger ball joint and a pressure lug lock-up, which locks the ball firmly without marking or damaging it. With this system even the smallest adjustments are always possible.
The ball joint is now located higher up, closer to the center of the holster. This reduces the torque and forces applied, contributing to the solid rigid feel of the holster.
A large easy-to-reach one-screw locking system allows you to adjust the holster position even when wearing it.
Body Rail Height Adjustment
The Alpha-X achieves its height adjustment by means of a rail built directly into the side of the holster body itself. This offers an extended range of adjustment and again reduces torque and forces applied. Here too the lock up is achieved by an expanding dovetail mechanism that does not gouge or damage the rail.
Detachable Belt Hanger
The Alpha-X has a two-piece belt hanger which can be dismantled by opening a single screw, allowing all position settings to be maintained while removing the holster body from the belt for easier space-saving transport.
The Alpha-X belt bracket is designed to fit only on a 1.5” wide competition style belt. It will not fit on a 1.75” or a 2” belt unless you are prepared to cut a piece out of the belt. And, like all Race holsters, it should only be used on a firm, rigid, thick belt.
Interchangeable Color Logo Inserts
The Alpha-X is available in black anodize only, with an assortment of optional color inserts for the hanger and body logos. You can change these laser-cut plastic inserts whenever you choose.
This new exciting product from Maglula is the most compact and versatile AR15 loader ever introduced. The StripLula will fit all plastic and metal AR15 magazines, clip onto the top lips and allow you to quickly and effortlessly load your mags.
It can be used to load ammo packed in stripper clips (12 seconds to load 30 rounds) or it can be used to load individual rounds(40 seconds to load 30 rounds).
It can even be used as a simply unloader, allowing the unloading of a 30 round magazine in 15 seconds flat.
If you shoot an AR15 – you’ve to have one of these!
The IDPA PDR PRO-II holster incorporates our latest generation Kydex holster body, as used in the popular PDR PRO-II holster. It is an efficient, fast holster body, available for many popular gun types for both right and left handed shooters.
The PDR-PRO-II holster body does not include the Suede lining that the PDR offers, making it more suitable for competition use, where speed and ease of draw are paramount. Attaching this PDR-PRO-II body to our Belt-Ride Ambidextrous Hanger, makes this holster a perfect choice for IDPA competitors or for general carry and range use. The bare Kydex cannot be beaten for speed, quick release and smooth draw. Tension adjustment is done by turning one, or both Phillips head screws, which are accessible from the outside of the holster body, while worn.
This hanger positions the holster body up close against the body and provides you a solid, yet tilt adjustable holster mount. It can be used with 1.5-2” wide belts and is fully ambidextrous, working equally well for RH or LH holsters. If you are using the belt spacers (most will, as most use a 1.5” belt) you can choose to have those spacers both above, below, or one above and one below the belt as you thread it through. This will provide you some height adjustment.
Available for right or left handed shooters, in Black only.
A set of two loaders for loading .22LR cal. single-stack wider mags with a projecting side-button, such as:
