Electric Case Feed System allows you to simply dump fired, cleaned and deprimed hulls into the bowl.  The Case Feeder orients the hulls right side up and fills the feed tube automatically, turning itself on and off as necessary, to keep the case feed tube full.

The Casefeeder will hold 600 .38 Special cases or 500 .223 Rem cases. 

Be aware this casefeeder is without the Case feeder plate that is appropriate for the type of ammunition you wish to reload. See here the Case feeder plate you need. 

Dillon handgun case gages allow you to check your handgun ammunition to ensure it will fit a minimum sized chamber. Made of stainless steel for long life.

The Dillon RL 550C will produce match-quality ammo for over 160 different rifle and pistol calibers. 

These kits fit the RL300,  RL450, RL550 series, AT500 and BL 550 machines 

This kit contains: 

• Shellplate
• Powder funnel
• Locator buttons

To order choose the right caliber. 

* Indicates that this cartridge requires use of the Extra large Powder Die #21253 sold separately. 

An automatic casefeed system, similar to the one used on Dillon's commercial-grade Super 1050 machine and the XL 650, is now available for YOUR RL 550 series press! You simply dump a quart of cases into the hopper and turn it on. The motor-driven disc fills the case feed tube, a micro-switch shuts off the motor when the tube is full, and automatically restarts it when low. This case feeder only works for the handgun calibers listed under the casefeed caliber conversions. Rifle cases are too tall to feed with this system.

Dillon claims...   Boxes are made of a tough, opaque plastic called "NoBreak". We dropped a full box of 45's off the second story onto the concrete floor- the result was nothing was broken, the box didn't even come open! 

13940 for XL650/1050 or 13940 SQD for square deal machines.

13940 is only the aluminium body. 

Part number 21275 is 13940 for 650/1050 with added screws and inner sleeve

21275 has all parts added to be the complete Body collar for XL650/1050.

The polymer nylon inner sleeve that is mostly needed together with the Aluminium body is 13845.

https://cesar-shop.com/product...

Sizing/Depriming Die
Our sizing/depriming dies feature a unique “floating decap assembly” with a snap spring that throws the spent primer off the pin and eliminates the problem of primer “draw back” that often occurs when decapping military brass. The primary feature of Dillon’s size die design the long, tapered carbide ring with a radiused opening remains unchanged. That radiused opening, and its importance to progressive reloading, is one of the reasons why our seat and crimp dies are better. We found a way of manufacturing these dies that has enabled us to make the lead-in radius even bigger! The bigger radius makes progressive loading with our equipment even smoother but that’s still only a part of the story.

Bullet Seating Die
Our new quick-disassembly seat die allows the user to disassemble and clean the seat die without losing adjustment. In this manner, bullet lube and shavings can be quickly removed from the die, thereby guaranteeing a constant seating depth. We’ve incorporated a “flip-flop” seating stem and a clip that enables you to remove the die insert and change the seating stem from round nose to semi-wadcutter without unscrewing a seating stem out of the die body. We’ve always included both types of seating stems, but the new double-ended design makes it a simple matter to remove a pin, reverse the seating stem, make any minor seating depth adjustments that may be necessary and go on loading in a fraction of the time it used to take.

Crimp Die
We’ve made it easy for you to remove the die insert for cleaning without having to change the critical crimp adjustment. Once your crimp die is set for the proper amount of crimp, you’ll never have to change it. This is especially good news for all of you who load lead bullets! Before, you had to unscrew the die from the toolhead and disassemble the die in order to remove any bullet lube or lead residue. Then, you had to start from square one to re-adjust the crimp. Those days are over. All you have to do now is pop a clip and the die insert drops into your hand for cleaning.

NOTE: All Dillon Pistol Die sets include our sizer/ decap die, seat die and a separate crimp die. (Taper crimp for autos; accu-crimp for revolvers.)

The secret of really punching out a lot of rounds in a hurry. Have these tubes filled and ready to go. There are tubes for small diameter primers and large diameter primers.

Dillon Precision Primer Magazine Tube Small SD / RL550/ Super 1050

Dillon's RF 100 Automatic Primer Filler eliminates the task of filling primer pick up tubes. Now you simply pour your primers from their box into the top, press the blue button and watch it run!No need to purchase additional primer pickup tubes.

In about two minutes the primers are inside the protective metal housing. In that time you have already loaded 30 rounds, the RF 100 is doing the work for you.

The RF 100 is available for either large or small primers, and conversion kits are available.

Mounts directly to Strong Mount. Fits the Square Deal, RL550 series and XL650 strong mounts. For 1050 machines use #22215. You must have a strongmount in order to use this bullet tray.

Rev B seater assembly small.  #21381

Dillon Square Deal B Primer slide bearing #13722

Spent primer catcher pin #13998

To keep your machine running also when you had a little accident.

Spare parts kit specifically for your Super 1050 machine.

Don't risk downtime waiting for a replacement parts!

Everything you need to keep your Dillon loader cleaned and lubricated up to factory specifications. Includes the spare parts kit for your machine.

Note : The aerosol inside makes it impossible to ship this by air.

Everything you need to keep your Dillon loader cleaned and lubricated up to factory specifications. Includes the spare parts kit for your machine.
Note : The aerosol inside makes it impossible to ship this by air.

Comes with powder check die and 3 check rods which are from .22 till .45 Cal. Battery AAA is included.

This item does not check the accuracy of the powder charge, it checks for double-charges or no-charges only.

Dillon powder body with drop tube #22273

This mount is for both the RL 550 series presses as well as the XL650.  Mount height = 8 1/2"  or 21,6 centimeters.

Raises your press above the work bench level and adds stability due to its larger footprint.

Recommended by lots of reloaders.

Dillon's CV-2001 Vibratory Case Cleaner is the largest in the industry. Its 12-1/2 quart bowl capacity will allow you to polish up to 1,300 .38/.357 or 550 .30-06 cases per hour.
Not only is our capacity greater, but our motor is larger in horse power, internally cooled, thermally protected, and turns on precision ball bearings. This is no "hobby" machine!
The bowl and base are constructed of 7/32" thick injection molded high-strength polypropylene which is impact and abrasion resistant.

Note: Tumblers are not designed for tumbling loaded ammunition.

Caliber conversion is not included.

Super 1050 Quick Change Kits allows you to leave your dies and powder charge set up and dedicated to a specific cartridge for faster, easier caliber changes.  Caliber changes require a caliber conversion kit (sold separately) in the caliber you want to add to your Dillon Super 1050.

This set consists of one Super 1050 powder measure nr. 20421 and one Super 1050 Toolhead nr. 20420. 

Be aware that the ratchet does not interchange between the Super 1050 and the RL1050 due to differences in length. 
If you have an RL1050, order toolhead #19399.

To keep your machine running also when you had a little accident.

Spare parts kit specifically for your XL650 machine.

Don't risk downtime waiting for a replacement parts!

Small Pistol .32, .380, 9mm, .38 Super, .30 Carbine

Large Pistol .40 S&W, 10 mm, .38 Special and larger, 7.62 x 39

Small Rifle .204 Ruger, .222, .223 Remington

Large Rifle .22-250 and larger

CM-2000 Case/Media Separator is large, 25,4 x 35,5 cm and will hold more than 1,600 .38 Special cases. It sits on a large media collection tub that measures 45,7 x 55,9 cm. The tub keeps the mess off the floor and bench. It's fast -- so fast it will remove media from 1500 rounds of .223 brass in a matter of seconds.