The ultimate in convenience for keeping your reloading bench clean and uncluttered. You will find in an instant what you need to make the switch from one to another caliber.  

This stand is for the RL550 Series and XL650 machines only.

These lighter weight Aluminum toolheads are machined from billet using the same precise CNC machining as our standard toolheads. Available in four different colors to allow you to quickly differentiate between calibers or load types.

Mistakes happen, so be prepared. Our hammer-style Bullet Puller quickly removes your bullets without damaging the bullet or the case. The rubberized grip is easy on your hands and we have also added a rubber insert inside the hammer tip to make it easy on your bullets. Easy and convenient to use whether checking an occasional  reload or pulling hundreds of bullets.

This Hammer Set comes with 4 collets.

LIFETIME WARRANTY.  MADE IN THE USA.

Collet information:
                                        Pistol                                      Rifle
Black (X-Small) -    .25 ACP                        Small Rifle Calibers
Blue (Small) -           .32 - .380                      17 Rem - 223 Rem
Green (Large) -       9mm - 10mm                       6mm - 8mm    
Red (X-Large) -      .41 - .45 ACP                  Belted Mags - 45-70

13940 for XL650/1050 or 13940 SQD for square deal machines.

13940 is only the aluminium body. 

Part number 21275 is 13940 for 650/1050 with added screws and inner sleeve

21275 has all parts added to be the complete Body collar for XL650/1050.

The polymer nylon inner sleeve that is mostly needed together with the Aluminium body is 13845.

https://cesar-shop.com/product...

The Dillon RL 1050 Cartridge Bin is used on the Super 1050 progressive reloading machine to catch the loaded cartridges. This bin is 260mm long, 110mm wide by 120mm deep and is great for storing just about anything.

Dillon's blue AkroBins are made of virtually unbreakable heavy-duty polypropylene. They're unaffected by weak acids and alkalis and are also water, rust and corrosion proof. They are great for reloaders requiring extra capacity, or those loading several calibers, bullet weights, bullet shapes, etc. AkroBins can be used for storing almost anything!

Collar sleeve Sqare deal B

The Dillon D-Terminator Scale is a hi-end professional grade scale. Using new load cell technology and advanced software, this digital scale provides accuracy up to 900 grains at 0.1 grain or 0.01 gram increments. Fast, stable, and accurate! The Dillon D-Terminator Scale is the only one you will want on your reloading workbench.

Key features:
900 grain/57 gram capacity
Accurate to 0.1 grain/0.01 gram
Supplied with dust/wind shield cover, stainless steel powder pan, including 50 gram calibration weight
Uses 4 AA batteries (included).

Sizing/Depriming Die 
Our sizing/depriming dies feature a unique "floating decap assembly" with a snap spring that throws the spent primer off the pin and eliminates the problem of primer "draw back" that often occurs when decapping military brass. The primary feature of Dillon's size die design the long, tapered carbide ring with a radiused opening remains unchanged. 
That radiused opening, and its importance to progressive reloading, is one of the reasons why our seat and crimp dies are better. We found a way of manufacturing these dies that has enabled us to make the lead-in radius even bigger! The bigger radius makes progressive loading with our equipment even smoother but that's still only a part of the story. 

This heavy-duty nylon cover comes equipped with a D-ring, allowing the zipper to be locked. 

If you have a Mr. Bulletfeeder mounted onto your 1050, this cover will still cover the machine, but you must orient the cover so that the zipper is on the LEFT side, not the back. 

Sizing/Depriming Die
Our sizing/depriming dies feature a unique “floating decap assembly” with a snap spring that throws the spent primer off the pin and eliminates the problem of primer “draw back” that often occurs when decapping military brass. The primary feature of Dillon’s size die design the long, tapered carbide ring with a radiused opening remains unchanged. That radiused opening, and its importance to progressive reloading, is one of the reasons why our seat and crimp dies are better. We found a way of manufacturing these dies that has enabled us to make the lead-in radius even bigger! The bigger radius makes progressive loading with our equipment even smoother but that’s still only a part of the story.

Bullet Seating Die
Our new quick-disassembly seat die allows the user to disassemble and clean the seat die without losing adjustment. In this manner, bullet lube and shavings can be quickly removed from the die, thereby guaranteeing a constant seating depth. We’ve incorporated a “flip-flop” seating stem and a clip that enables you to remove the die insert and change the seating stem from round nose to semi-wadcutter without unscrewing a seating stem out of the die body. We’ve always included both types of seating stems, but the new double-ended design makes it a simple matter to remove a pin, reverse the seating stem, make any minor seating depth adjustments that may be necessary and go on loading in a fraction of the time it used to take.

Crimp Die
We’ve made it easy for you to remove the die insert for cleaning without having to change the critical crimp adjustment. Once your crimp die is set for the proper amount of crimp, you’ll never have to change it. This is especially good news for all of you who load lead bullets! Before, you had to unscrew the die from the toolhead and disassemble the die in order to remove any bullet lube or lead residue. Then, you had to start from square one to re-adjust the crimp. Those days are over. All you have to do now is pop a clip and the die insert drops into your hand for cleaning.

NOTE: All Dillon Pistol Die sets include our sizer/ decap die, seat die and a separate crimp die. (Taper crimp for autos; accu-crimp for revolvers.)

The secret of really punching out a lot of rounds in a hurry. Have these tubes filled and ready to go. There are tubes for small diameter primers and large diameter primers.

Electric Case Feed System allows you to simply dump fired, cleaned and deprimed hulls into the bowl.  The Case Feeder orients the hulls right side up and fills the feed tube automatically, turning itself on and off as necessary, to keep the case feed tube full.

The Casefeeder will hold 600 .38 Special cases or 500 .223 Rem cases. 

Be aware this casefeeder is without the Case feeder plate that is appropriate for the type of ammunition you wish to reload. See here the Case feeder plate you need. 

Comes with powder check die and 3 check rods which are from .22 till .45 Cal. Battery AAA is included.

This item does not check the accuracy of the powder charge, it checks for double-charges or no-charges only.

This mount is for both the RL 550 series presses as well as the XL650.  Mount height = 8 1/2"  or 21,6 centimeters.

Raises your press above the work bench level and adds stability due to its larger footprint.

Recommended by lots of reloaders.