Spent primer catcher pin #13998

The Dillon RL550C is the most versatile reloading machine in the Dillon Precision Products line.  It will accommodate the widest variety of cartridges from 32 ACP up to 338 Lapua, 416 Rigby, and 460 Weatherby.

The RL550 has a manually indexed shellplate making it easier to master the various steps of reloading. Manual indexing also gives the operator greater control over each individual step in the loading process. Caliber changes are simple and require fewer parts than other machines which makes it less expensive to convert to another cartridge.

Reloading with Dillon’s RL 550 is Easy as 1-2-3!

Most shooters realize that reloading is the most economical way to enjoy their sport, but many shooters are unaware of just how simple it is to reload. In fact, Dillon’s RL 550C is the easiest progressive loader in the world to learn to reload with. How can we make that statement? Simple. Since all of the reloading steps are performed with a stroke of the handle, there is less to remember (or forget) than with an old-fashioned single-station press.

No dies are included with the RL550!

Electric Case Feed System allows you to simply dump fired, cleaned and deprimed hulls into the bowl.  The Case Feeder orients the hulls right side up and fills the feed tube automatically, turning itself on and off as necessary, to keep the case feed tube full.

The Casefeeder will hold 600 .38 Special cases or 500 .223 Rem cases. 

Be aware this casefeeder is without the Case feeder plate that is appropriate for the type of ammunition you wish to reload. See here the Case feeder plate you need. 

Dillon claims...   Boxes are made of a tough, opaque plastic called "NoBreak". We dropped a full box of 45's off the second story onto the concrete floor- the result was nothing was broken, the box didn't even come open! 

Sizing/Depriming Die
Our sizing/depriming dies feature a unique “floating decap assembly” with a snap spring that throws the spent primer off the pin and eliminates the problem of primer “draw back” that often occurs when decapping military brass. The primary feature of Dillon’s size die design the long, tapered carbide ring with a radiused opening remains unchanged. That radiused opening, and its importance to progressive reloading, is one of the reasons why our seat and crimp dies are better. We found a way of manufacturing these dies that has enabled us to make the lead-in radius even bigger! The bigger radius makes progressive loading with our equipment even smoother but that’s still only a part of the story.

Bullet Seating Die
Our new quick-disassembly seat die allows the user to disassemble and clean the seat die without losing adjustment. In this manner, bullet lube and shavings can be quickly removed from the die, thereby guaranteeing a constant seating depth. We’ve incorporated a “flip-flop” seating stem and a clip that enables you to remove the die insert and change the seating stem from round nose to semi-wadcutter without unscrewing a seating stem out of the die body. We’ve always included both types of seating stems, but the new double-ended design makes it a simple matter to remove a pin, reverse the seating stem, make any minor seating depth adjustments that may be necessary and go on loading in a fraction of the time it used to take.

Crimp Die
We’ve made it easy for you to remove the die insert for cleaning without having to change the critical crimp adjustment. Once your crimp die is set for the proper amount of crimp, you’ll never have to change it. This is especially good news for all of you who load lead bullets! Before, you had to unscrew the die from the toolhead and disassemble the die in order to remove any bullet lube or lead residue. Then, you had to start from square one to re-adjust the crimp. Those days are over. All you have to do now is pop a clip and the die insert drops into your hand for cleaning.

NOTE: All Dillon Pistol Die sets include our sizer/ decap die, seat die and a separate crimp die. (Taper crimp for autos; accu-crimp for revolvers.)

Dillon claims..

Boxes are made of a tough, opaque plastic called "NoBreak". We dropped a full box of 45's off the second story onto the concrete floor- the result was nothing was broken, the box didn't even come open! 

Dimensions: 
Main compartment - 12.5" X 7" X 10" Tall 
Main compartment has two internal flat pockets, 5.5" Wide X 7.5" Tall 
The top flap has two mesh pockets 

End Pockets - 8.5" Tall X 6.5" Wide X 2"Deep 

Front Pocket - 9" tall X 6" Wide X 2" Deep 

2 Round front pouches, 3" Diameter, for water bottles or empty brass 

The back has a double bellows pocket with a velcro divider that measures 7" Tall X 9" Wide 

Small Pistol .32, .380, 9mm, .38 Super, .30 Carbine

Large Pistol .40 S&W, 10 mm, .38 Special and larger, 7.62 x 39

Small Rifle .204 Ruger, .222, .223 Remington

Large Rifle .22-250 and larger

To keep your machine running also when you had a little accident.

Spare parts kit specifically for your XL650 machine.

Don't risk downtime waiting for a replacement parts!

This mount is for both the RL 550 series presses as well as the XL650.  Mount height = 8 1/2"  or 21,6 centimeters.

Raises your press above the work bench level and adds stability due to its larger footprint.

Recommended by lots of reloaders.

The Dillon RL 550C will produce match-quality ammo for over 160 different rifle and pistol calibers. 

These kits fit the RL300,  RL450, RL550 series, AT500 and BL 550 machines 

This kit contains: 

• Shellplate
• Powder funnel
• Locator buttons

To order choose the right caliber. 

* Indicates that this cartridge requires use of the Extra large Powder Die #21253 sold separately. 

Dillon Precision Primer Magazine Tube Small SD / RL550/ Super 1050

Dillon's CV-750 Vibratory Case Cleaner is perfect for reloaders with limited space. CV-750 bowl is 12" across, the unit is 12" tall. Capacity of 500 pieces of 45ACP or 38/357, or about 200 pieces of 30-06 brass. All the electrical/electronic components of Dillon equipment are covered by a one-year warranty from date of purchase. This unit is designed for dry media only.  Use of water or wet media will void the warranty. 

Note: Tumblers are not designed for tumbling loaded ammunition

Dillon's NEW Concealed Carry Tote accommodates all the tools you need to survive the urban jungle. This low-profile carry case looks like an ordinary briefcase or laptop case, but it's designed for your handgun as well as your PC! It's made of rugged nylon fabric, with heavy-duty zippers on all compartments. The main compartment is 15" x 11.5" x 3" deep, with pouches in back and front. The hidden gun pocket is held closed with hook & loop fasteners for quick access, has a 14.5" opening and is 10.5" deep.  The front pockets are 6.5" x 8" x 1.5" and feature inner pockets for flat items. There is also a zippered compartment on the back of the case sized to accommodate a ballistic armor plate. 

Dillon's CV-2001 Vibratory Case Cleaner is the largest in the industry. Its 12-1/2 quart bowl capacity will allow you to polish up to 1,300 .38/.357 or 550 .30-06 cases per hour.
Not only is our capacity greater, but our motor is larger in horse power, internally cooled, thermally protected, and turns on precision ball bearings. This is no "hobby" machine!
The bowl and base are constructed of 7/32" thick injection molded high-strength polypropylene which is impact and abrasion resistant.

Note: Tumblers are not designed for tumbling loaded ammunition.

Extra powder dies allow you to move your powder measure from toolhead to toolhead without changing the "belling" adjustment.Toolhead not included. These are for the RL550, XL650,and RL450 equipped with the automatic powder system