Ace's skeletonized stock for the AR-15 rifle. Closed cell foam overtube provides an extremely comfortable cheek weld. Uses A2 buffer tube, rifle length buffer and rifle length buffer spring (NOT INCLUDED). Foam overtube, buttpad and all needed mounting hardware included. Length 10" Weight 11.2oz

Note: Comes only with ARFX Stock and Foam Overtube.  Does not include A2 Extension Tube, Rifle Buffer, Or Rifle Buffer Spring.

The all-new NCT3 compensator, designed to eliminate recoil and muzzle climb while being tailored to your exact requirements.  Available for .223 or 9mm bore diameters.

Factory 25-round magazine for Smith & Wesson M&P 15-22 rifles.

This is a one-piece molded polymer body with a textured gripping surface that has a 25 round capacity of .22 LR and features a load assist button.

Textured gripping surface and wide-cut windows.

M&P 15-22 magazines match NATO standard AR-15 magazines in size and nearly in capacity—making them perfect trainer mags and practical all-around choices for your kit.

Current Handgun pistol grips were carefully considered and reviewed to create a modern full-sized AR pistol grip that offer positive support and control for one handed operations. The finger swell and grooved back straps provide a positive grip surface with wet or gloved hands

? Increases operator comfort and weapon performance, providing more control during reloading and firing
? Tab covers the receiver gaps that cause discomfort during sustained usage and can be easily removed if desired
? Designed for M16/M4/AR15/HK41
? Full Size Pistol Grip
? Optimal for one handed operation

Weight: 2.5oz

Height: 1.2"

Width: 1.341"

Length: 2.543"

The PMAG D-60 is a durable, lightweight, highly reliable 60-round 5.56x45 NATO/.223 Remington* polymer drum magazine for AR15/M4 compatible weapons.

 With a larger capacity than previous PMAGs, the PMAG D-60 gives the shooter 60 rounds of ammunition, effectively allowing the same round count as two standard capacity 30-round magazines without requiring a critical reload.

Product Details

The Magpul MOE AK Hand Guard is a replacement for standard AK pattern rifles without a front sling loop on the hand guard retainer. Featuring an extended gripping portion, integrated heat shield, M-LOK® mounting capability, and replacement gas tube cover, the MOE AK Hand Guard is an upgrade to any AK pattern rifle.

 Made in U.S.A. Hand Guard counts as one US compliance part for 922(r).

Compensator specially designed for sports activities, it is ideal for long barrel carbines.

Its side windows give stability and neutrality to the weapon, minimizing the nose-up and getting back on target cracking followup shots as fast as possible.

The special radial holes located at the base of each window have been specially designed to dampen the recoil.

Functional for both close and long range shooting.

The elongated shape combined with the windows gives a distinguishable and refined image.

It is made of high quality steel and subjected to heat treatments in order to make the non-stick surface to gunpowder residues.

Thread 1/2×28

MBX "Fang" CTR & Hogue Stock Extensions

For installation on the Magpul model CTR, this extends the factory Butt Stock to allow for deeper and more stable contact with the shoulder pocket allowing for greater recoil control and added stability when reloading along with a raise stance when used in conjunction with the MBX off set mount.

BT12-QK: Standard Height Accu-Shot® Precision Rail Monopod

The BT12-QK is our standard height Precision Rail Monopod (PRM) with QK01 Quick Knob. Attaches to standard 1913 Picatinny rail. Available in black only.

Elevation Range: 3.75 – 4.65”

Folded Length: 3.85" approximate

Weight: 7.4 ounces

The Geissele Hi-Speed National Match Trigger Series is designed for NRA High Power Rifle competition with highly modified match-grade AR-15-type rifles.  The Service Rifle, Designated Marksman Rifle, and Match Rifle Spring sets are all included in this purchase.

Nordic Components, The M-LOK QD Sling Mount Provides a Forward Attachment Point For a Push-Button QD Sling, Machined From Milspec Anodized Aluminum, The Low-Profile M-LOK QD Sling Mount Features Beveled Edges to Reduce Snagging and Has an Anti-Rotation Design That Prevents Swivels From Spinning, All Hardware Necessary for Attachment Directly to M-LOK Slots is Included

NORDIC COMPONENTS AR1-15 FORGED UPPER RECEIVER- STRIPPED

Super Dynamic Enhanced SD-E AR Trigger

The Geissele Super Dynamic-Enhanced (SD-E) Trigger featuring an exclusive flat trigger bow, is a finely-tuned two stage trigger providing enhanced trigger control and weapon accuracy while maintaining the robustness and reliability of our combat-proven two-stage trigger.

Choose between either our 16”and 18'' .223 Wylde or 11.5” 5.56 barrels

Product Details

The Magpul M-LOK AFG (Angled Fore Grip) is the result of research and refinements done to the original AFG and AFG-2. By integrating the direct-attach M-LOK mounting system with minimalist construction we were able to produce a high strength grip that only weighs 1.2 ounces, including hardware. 

 Allowing for a wider range of mounting location options, the M-LOK AFG is ¾" shorter than the AFG-2 while maintaining a similar gripping surface area. Even though the M-LOK AFG is more compact than its predecessors it continues to take into account natural body mechanics to provide a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the M-LOK AFG helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.

 Made in U.S.A.

Product Details

Designed to considerably improve the speed and efficiency of the AR15/M16 bolt catch, the B.A.D. Lever quickly addresses reloading and malfunction clearance shortcomings of AR15/M16 platforms by extending a paddle to the right side of the weapon, allowing manipulation of the bolt stop from the fire control/ready position with the right-hand trigger finger.

Made from milspec-anodized aluminum, the B.A.D. Lever attaches to the standard AR15/M16 bolt release without permanent modification to the weapon. Functional for both left and right-handed shooters, the B.A.D. Lever also allows traditional bolt catch manipulation according to the AR15/M16 manual of arms. All mounting hardware included.

 Made in U.S.A.

Product Details

The UBR GEN2 is an adjustable stock for AR15/M4 and AR10/SR25 platforms, designed to offer similar strength and stability as a fixed stock with a consistent and comfortable cheek weld in any position.

 An update of the revolutionary Utility/Battle Rifle (UBR) stock, the UBR GEN2 features a fixed cheek piece to provide a consistent cheek weld in any of its eight positions, and is compatible with Carbine as well as A5 and SR-25 length buffer systems. Designed to accommodate large bore AR calibers and withstand severe impacts, the UBR GEN2 is nearly five ounces lighter while retaining all the durability its predecessor was legendary for. Comes standard with front and rear QD sling attachment points, two footman’s loops, the ergonomic MOE SL™ angled-toe rubber butt-pad, and customizable storage compartment.

 Made in U.S.A.

Gas Tube Kit, Rifle

Product Details

The PRS GEN3 is a field precision stock for AR15/M16 and AR10/SR25 platforms, featuring tool-less length of pull and cheek piece height adjustment.

 With solid adjustments for length of pull and cheek piece height via aluminum detent knobs, the PRS GEN3 (Precision Rifle/Sniper) stock provides a stable interface and is intended for semi-automatic sniper or varmint type rifles. Offering a nearly universal fit, it is optimized for rifle-length receiver extensions but will also mount to many mil-spec carbine and A5-length tubes*. Includes a cant/height-adjustable rubber butt-pad and rotation-limiting QD sling swivel cups as well as M-LOK® slots on the bottom for rear monopod mounting.

 Made in U.S.A.

The latest innovation of Velocity Triggers is Diamond Like Carbon Coating (DLC) on the trigger which will give your Velocity Trigger the highly effective combination of a low coefficient of friction and high micro-hardness, its also a surface that will not rust and gives your trigger a deep dark black color.

Simply stated, the Diamond Like Carbon Coating (DLC) results in a greater wear resistance over the life of the trigger.

Finally, a high quality AR-15 trigger that makes your AR feel like a bolt action rifle.

This stock uses Ace?s original soft foam overtube for the ultimate cheek weld. A billet machined gusset reinforces the receiver extension tube at its weakest point directly behind the receiver. Precision machined aluminum butt clamps directly to the RET and provides a machined in sling mount.

Note: Comes only with ARFX Stock and Foam Overtube.  Does not include A2 Extension Tube, Rifle Buffer, Or Rifle Buffer Spring.

JP Enhanced Reliability Spring Kit

This spring kit will yield a 3.5-4.0 lb. trigger pull with JP Fire Control parts. This kit is intended for use with JP trigger parts and will not necessarily yield substantial change on standard AR-15 trigger components. 

Application: Use of this spring kit allows for use of ammunition with low-sensitivity primers such as those found in NATO-spec and various foreign-manufactured ammunitions, but in the case of large-frame ARs and duty/defense rifles, domestic-manufactured ammo is strongly recommended to ensure 100% ignition reliability.

TTI Firepower PMAG Magazine Extension

- Designed to work with stock spring.

- Overall weight 2.1oz.

- Length, 1 inch.

- Patented, proven push-pin design.

- Easily attaches and detaches from the magazine.

- No specialty tools, devices, or additional springs required for assembly/disassembly, simply pop off the insert at the bottom of the spring and slide on the extension.

- One piece design; no small parts to keep track of.

- Minimal length addition to allow usage while in a prone position.

- Holds 35+1 rounds on the PMAG30.

- Holds 46+1 rounds on the PMAG40.

- The added weight helps the magazine drop free easier for faster reloads.

- CNC machined from billet aluminum.

- Hard anodized.

Spectrum

Compensator ideal for tactical use, whose maximum yield is with short barrel carbines.

The side windows, specially tapered to dampen the recoil and at the same time break the flame. The upper holes, on the other hand, give the weapon stability and neutrality, minimizing the nose-up and reducing the twist. Lastly, the four frontal tips allow this compensator to be used as a means of breaking.

It is made of high quality steel and subjected to high-hardness heat treatments with the double end to make the non-stick surface to the gunpowder residues on one side and robust on the other.

Thread 1/2×28

he Seekins Precision DNA Charging Handle offers a full body and textured grip surface to improve user controls. Our team set out to create a product that would not only offer ergonomic fit and function, but also aesthetic design. Crafted in a climate controlled laboratory by a team of scientists who were only allowed to use their right hands, we can proudly say the DNA handle is the most non-ambidextrous charging handle in our product line up. Really, it's just a charging handle, a very non-ambidextrous one. Enjoy!