€ $
Tax settings
select country
Select brand
 
Brand
Reset

ADVANCED SEARCH

Color
Price
Size
Reset

SPECIAL OFFER

Subcategories

Browse by category

New
Firearms
Firearm parts
Gear
Reloading & ammunition
Maintenance
Optics & Sights
Demo / Used items
Sale
Upper parts
Bolt small parts and recoil systems
Lower parts
Handguards, rails and mounts
Muzzle devices
Stocks and grips
Triggers and trigger parts
Gas blocks and tubes
Magazines and parts

AR15 and other rifle parts

Newest Items First
96 Per Page
RC-tech 45 Degree Polymer Picatinny Offset Mount
€16.31  
Designed for addin a red dot sight to your rifle alongside a riflescope. Made from polymer.
In stock
+ −
HIPERFIRE HIPERTOUCH ELITE AR15 Trigger
€221.27  
HIPERFIRE HIPERTOUCH ELITE AR15 trigger.
In stock
+ −
KYNTEC KynSHOT RB5004 ''Shorty'' AR10 Cal .308 Hydraulic Buffer
€139.30  
The KynSHOT RB5004 “Shorty” Recoil Buffer is designed for AR-10 carbines with a collapsible stock and an AR-15 length (7.0") buffer tube which is common on many AR-10 applications. The RB5004 reduces felt recoil 20-30%, while largely eliminating muzzle flip. The improvement in weapon accuracy – specifically second and third shot accuracy – is even more noticeable as shooters report that their time to reacquire a target decreases, and in many cases never leaves their scope sights. This buffer has patented damping technology to absorb the shock of impact from the bolt carrier's rearward motion and to prevent bolt bounce as a new cartridge is chambered.
In stock
+ −
KYNTEC KynSHOT RB5000L AR15 300AAC Hydraulic Buffer
€139.30  
The KynSHOT RB5000L Hydraulic Recoil Buffer is optimized for use with light loads, including subsonic ammunition and .300 BLK. The RB5000L has seen heavy use with civilian competition shooters, law enforcement personnel, and the United Sates Armed Forces. This buffer has patented damping technology to absorb the shock of impact from the bolt carrier’s rearward motion and to prevent bolt bounce as a new cartridge is chambered. This model is made lighter and requires less force to cycle than the standard AR-15 KynSHOT Buffer. This is intended for soft cycling or under gassed guns that will not lock back on the last round with the standard carbine hydraulic buffer or heavier buffers. .300 BLK guns running exclusively supersonic ammo may be fine with a standard hydraulic buffer if the bolt cycles firmly and has proper ejection placement.
In stock
+ −
KYNTEC KynSHOT RB5000HP AR15 Hydraulic Buffer (also for 9mm CMMG Conversion)
€139.30  
The KynSHOT RB5000HP Recoil Buffer is designed for over gassed AR-15 carbines or "Thumpers" like the .50 Beowulf or .458 SOCOM. The RB5000HP is also designed for CMMG's 9mm radial delayed blowback system.  Please contact us to verify your application. Made using 17-4 stainless steel, the RB5000HP KynSHOT Recoil Buffer AR-15 is a proven system that has seen heavy use with civilian competition shooters, law enforcement personnel and the United States Armed Forces. This buffer has patented damping technology to absorb the shock of impact from the bolt carrier’s rearward motion and to prevent bolt bounce as a new cartridge is chambered. The RB5000HP KynSHOT Recoil Buffer reduces felt recoil by 20-30%, while largely eliminating muzzle flip.The improvement in weapon accuracy – specifically second and third shot accuracy- is large as shooters report that their time to reacquire a target decreases, and in many cases never leaves their scope sights.
Out of stock
HIPERFIRE X2S Mod3 Two-Stage AR Trigger
€237.66  
HIPERFIRE® is simply unmatched in performance and reliability. We have broken all of the standards in single-stage AR triggers with our HIPERTOUCH® family, and now we have done the same in our new X2S™ family of two-stage triggers. Whether you shoot competitively, train to defend yourself and...
In stock
+ −
HIPERFIRE X2S Mod1 Two-Stage AR Trigger
€221.27  
HIPERFIRE® is simply unmatched in performance and reliability. We have broken all of the standards in single-stage AR triggers with our HIPERTOUCH® family, and now we have done the same in our new X2S™ family of two-stage triggers. Whether you shoot competitively, train to defend yourself and your family, or you simply want to enjoy shooting out on the range, ensuring your rifle functions properly every time, without fail, is important. Our new two-stage triggers feature the same technology that HIPERFIRE has become known for. Radical Sear Mechanics™, Cam-Over Toggle Engine™, Soft Start Lock-Up™, Tactile Weightless Break™, user adjustable pull weights, mil-grade components, and precision manufacturing processes come together to make one of the most robust two-stage triggers available today. The MOD-1 design has a longer first stage than MOD-2 or MOD-3 for a more defined first stage prep, but shares the same curved bow and Maganese Phosphate coating as the MOD-2 design.
In stock
+ −
T-Arms AR15 Ambi Mag Release
€69.67  
In stock
+ −
T-Arms AR15 QD Back Plate Set
€36.89  
This set includes an AR15 backplate with a QD mount and a Castle nut for mounting your buffer tube.
In stock
+ −
T-Arms AR15 Mil-spec Upper Receiver
€184.43  
Mil-spec AR15 upper receiver with integrated bress deflector. Forward asist and ejection port cover are allready installed.
In stock
+ −
OUTERWILDE SS AR15/AR10 Gas Tube Black Nitride
€14.71  
Outerwild’s gas tubes are precisely machined from seamless stainless steel tubing and fit all standard AR-type gas systems.
In stock
+ −
Magpul AR-15/10 Heat-Treated Castle Nut
€9.80  

The Heat-Treated Castle Nut screws onto the AR15/M4 lower receiver extension (buffer tube) and keeps the receiver extension and lower receiver end plate secured in place.  The large notches allow for positive engagement with a castle nut wrench for proper installation and torque.  The smaller notches provide a location for the end user to stake the castle nut to prevent accidental loosening.

Finished in a Mil-spec manganese phosphate.

In stock
+ −
Magpul AR15/M4 Carbine Buffer H - H3
€69.63  
This Mil-Spec construction AR15 / M4 H3 Carbine Buffer is for use in AR15 / M4 carbine-type receiver extensions. It is constructed out of aluminum and contains three tungsten weights.
In stock
+ −
Magpul Enhanced Receiver Extension SR25/M110 - 10 Position
€98.32  

The Magpul Enhanced Receiver Extension is a 10-position, Mil-Spec sized, SR25 / M110 profile buffer tube optimized to fit with the full line of Magpul Mil-Spec Carbine Stocks.

Due to its longer length, this receiver extension is compatible with most DPMS® Gen 1 pattern 7.62x51 firearms with standard length AR15 / M4 carbine buffer components as well as aftermarket A5 buffers and springs for use on 5.56x45 AR15 / M4 platforms.*

Constructed of impact extruded 7075-T6 aluminum with Type III, Class 2 hard coat anodizing for an extremely hard, abrasion resistant surface. The interior of the receiver extension features Everlube® coating for enhanced corrosion resistance and reduced friction and wear. The additional position holes allow for more length-of-pull fitment options.

Out of stock
Magpul Enhanced Receiver Extension AR15/M4 - 7 Position
€81.93  

The Magpul Enhanced Receiver Extension is a 7-position, Mil-Spec sized, AR15 / M4 profile buffer tube optimized to fit with the full line of Magpul Mil-Spec Carbine Stocks.

Constructed of impact-extruded 7075-T6 aluminum with Type III, Class 2 hard coat anodizing for an extremely hard, abrasion resistant surface. The interior of the receiver extension features Everlube® coating for enhanced corrosion resistance and reduced friction and wear. The additional position holes allow for more length-of-pull fitment options while retaining a standard length for the tube.

In stock
+ −
Magpul AFG - Angled Fore Grip
€39.30  
Compatible with most any M1913 Picatinny-railed hand guard, the Magpul AFG (Angled Fore Grip) takes into account natural body mechanics and provides a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the AFG helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots.
In stock
+ −
ODIN XMR 3 Extended Magazine Release
€24.55  
Inspired by the ODIN Works O2 Lite, the XMR3 is the latest mag release available from ODIN Works. Machined from billet 6061 aluminum and designed to work with KNS pins and the BAD lever. The XMR3 has the largest profile yet, making it easily accessible by all shapes and sizes of hands and fingers. Works with both AR15 and some AR10 lower receivers. For Aero M5 Lowers purchase the AR10 Add on button.
In stock
+ −
ODIN AR15 O2 LITE Handguard 9.5'' | 12.5'' | 15.5''
€196.68  
The O2 Lite is the latest and lightest of all the ODIN Works Forends. Precision machined from 6005-T651, the O2 Lite is a full 20% lighter than its predecessors. All ODIN Works Forends are free floating for accuracy and hard anodized for durability.
In stock
+ −
ODIN AR15 Zulu 2.0 Adjustable Stock Kit
€163.89  
The ZULU 2.0 stock combined with the ODIN Works padded intermediate buffer tube creates a complete stock suitable for rifle or carbine builds. Machined from 6061 aluminum with ergonomics and function in mind, the ZULU2.0 stock gives you an ambidextrous and adjustable solution for your rifle. With the reversible QD adapter included, this stock allows you to set it to your needs.
Out of stock
SPRINCO AR Buffer Spring RED
€22.91  
Extra Power Buffer Spring. This was our first AR buffer spring solution that we were tasked to design back in 2006 for a Force Modernization Team to specifically address spring-related M4 carbine reliability function issues for operating challenges in the Eastern Asia Theatre. The design loads of the Red spring are approximately 25% greater than the White spring for one of the considered Load Constants in the spring design. Refer to provided tuning procedure reference documents prior to calling for recommendations for use. The Red spring is commonly used in 9mm, 6.8 SPC, 6.5 Grendel, .450 BM, .450 SOCOM, .500 Beowulf, and Colt LE6920’s specimen carbines, but certain specimen guns can deviate from the norm depending upon port values and the power factor of your chosen ammunition loads. Color Coded RED.
Out of stock
SPRINCO AR Buffer Spring BLUE
€22.91  
Enhanced Power Buffer Spring. The design loads of the Blue spring are approximately 15% greater than the White spring for one of the considered Load Constants in the spring design. Refer to provided tuning procedure reference documents prior to calling for recommendations. While contemporary internet forum lore leans towards the use of the Blue spring with an H2 or ST-T2 buffer for 14.5 - 16” ML carbines, nothing is set in stone due to the vast range of gas port values in the wild that have come into play since we first entered the arena. Color Coded BLUE.
Out of stock
SPRINCO AR Buffer Spring YELLOW
€22.91  
Reduced Power Buffer Spring. We collaborated with two prominent commercial ammunition manufacturers and two prominent gunsmiths to arrive at the design for the Yellow spring. It’s approximately 20% lighter than the White spring, and was the consensus choice out of 4 different evaluation samples provided to all parties. They all added in their final evaluations that if a particular gun needed a lighter spring, that the gas port should be enlarged for overall reliability. The Yellow spring is also appropriate for with low power SRTA training or SIMS Rounds for training operations. Color coded YELLOW.
Out of stock
SPRINCO AR Buffer Spring ORANGE
€22.91  
Extra Extra Power Buffer Spring. The Orange spring is much stouter than the Red spring. The Orange buffer spring was originally engineered for the demands presented by.308 / 6.5 CM / .260 Rem, etc., heavy BCG carbine DPMS Pattern applications using standard 7" Depth M4 extension tubes and short 2.5" buffers (Including aftermarket "heavy buffers") in robustly gassed 16” - 18” ML gas carbine platforms, but has been proven to be a requirement for tuning over gassed carbines of any equivalent heavy calibers in AR-10 pattern tubes with 3.25" buffers or lesser calibers (5.56, etc.). Color Coded ORANGE.
In stock
+ −
S&W M&P15-22 Ejector
€27.01  
Smith & Wesson M&P15-22 Ejector. This ejector is manufactured for the Smith & Wesson M&P15-22 blowback-operated rifles chambered in .22 LR. This ejector is made from durable black steel and is responsible for ejecting spent casings from the firearm. This part is perfect as a spare on the workbench or as an immediate replacement for a lost or damaged piece.
In stock
+ −
S&W M&P15-22 Firing Pin Spring
€12.30  
Smith & Wesson M&P15-22 Firing Pin Spring. This firing pin spring is manufactured for the Smith & Wesson M&P15-22 blowback-operated rifles chambered in .22 LR. This spring is responsible for returning the firing pin to position after the rifle has been fired. This steel...
In stock
+ −
S&W M&P15-22 Recoil spring
€12.30  
Smith & Wesson M&P15-22 Recoil Spring. Constructed from quality steel, this recoil spring is specifically manufactured for the Smith & Wesson M&P15-22 blowback-operated rifles chambered in .22 LR. This component is installed onto the guide rod and provides tension, helps reduce recoil, and returns the bolt forward after firing. Perfect as a spare or immediate replacement, this S&W piece will keep your Smith & Wesson firearm in top operating shape.
In stock
+ −
TIMNEY Impact AR-15 Trigger
€180.29  
Timney has been asked for an AR trigger at a lower price without compromising on quality for budget-build AR’s. You asked, Timney listened. Introducing the Impact - the next trigger in the People’s Choice Line of Excellence from the craftsmen and women of The World's Finest Trigger.
In stock
+ −
VOLQUARTSEN S&W M&P15-22 EDGE Extractor
€18.81  
Exact Edge Extractor for the Smith and Wesson M&P 15~~22. The replacement extractor was manufactured through a EDM process to provide exact tolerances. The geometry has been changed to provide positive ejection every time. The extractor is A2 Tool Steel and hardened to Rc 58~~60 so this extractor will not wear out or round over after years of use.
In stock
+ −
VOLQUARTSEN S&W M&P15-22 SureStrike Firing Pin
€40.94  
Our firing pin is CNC machined from S7 Tool Steel to withstand an unlimited amount of firing. It features a design with more material than factory to ensure hard-hitting performance. We also adjusted the point of contact to cover more of the rim to help achieve positive ignition on every shot.
In stock
+ −
T-Arms AR Aluminium Trigger Guard
€20.48  
In stock
+ −
Geissele Super 3Gun AR Trigger
€311.43  
The Geissele Super 3 Gun (S3G) is a semi-automatic, hybrid cross between a single-stage trigger and a traditional 2-stage trigger. Its robust feel and light pull weight, combined with a lightning-quick reset, make this trigger ideal for any 3 Gun competitor.
In stock
+ −
TIMNEY HK MP5 Two-Stage Trigger
€409.80  
The Timney HK MP5 trigger is factory-set with a two pound first stage and a two pound second stage that elevates the platform so the shooter can achieve the utmost in accuracy.
In stock
+ −
KYNTEC Spacer Weight 70g/2,5oz
€16.35  
Our KynSHOT buffer weight, that was designed in cooperartion with Blitzkrieg Components, LLC., can be used with our PCC hydraulic buffers, and in certain cases, our AR hydraulic buffers to add mass in front of the buffer. The Spacer Weight also adds .75" in length to the buffer system, and adds 2.5 ounces of weight, which is designed for a close fit buffer tube while preventing tilting of the buffer during cycling. The weight has several functions: the additional mass further delays initial bolt movement and slows the bolt velocity, it helps to keep the buffer aligned in the buffer tube, and its additional length can be used to make a short stroke system if desired.
Out of stock
MFT ENGAGE AR15/M16 Pistol Grip V2
€20.45  

15 degree angle improves comfort and control. Texture provides a positive grip surface with wet or gloved hands A combination of fit and function unparalleled by the originally supplied M16/AR15/M4/HK416 pistol grip.

In stock
+ −
ADC PCC/AR15 Ovs. Mag Release Button
€24.55  
In stock
+ −
MimTac Sport Trigger - AR15
€143.36  
Introducing the game-changer in firearm triggers: the sleek and innovative flat trigger. The sleek design isn’t just about aesthetics; it’s about enhancing your performance. With a wide range of customizable options available, you can select the perfect pull weight to suit your personal preferences and shooting style. Don’t settle for mediocrity when you can upgrade to greatness.
In stock
+ −
SAI A2 NATO Flash Hidder 1/2x28 UNEF
€49.18  
Standard A2 NATO flashider with 1/2x28 UNEF thread.
Out of stock
T-Arms AR15 Cal. .30 Muzzle Break 5/8x24 UNEF
€61.47  
In stock
+ −
T-Arms AR15 .223Rem Muzzle Break 1/2x28 UNEF
€57.38  
Out of stock
TONI System M-Lok Short Vertical Grip
€26.23  
M-Lok short vertical grip.
In stock
+ −
TONI System M-Lok Finger Rest
€16.39  
M-Lok finger rest.
In stock
+ −
TONI Vibram Grips for AR15 Handle
€34.43  
In stock
+ −
T-Arms AR15 Recoil Spring Hard - Carbine Lenght
€11.44  
In stock
+ −
T-Arms AR15/PCC Tactical Handguard Alu 11,5''
€139.30  
In stock
+ −
T-Arms AR15/AR9 Tiger Charging Handle
€65.53  
In stock
+ −
Magpul MOE SL-S Carbine Stock Mil-Spec
€102.42  

The storage-capable version of the flagship Magpul MOE SL® carbine stock, the MOE SL-S (Storage) Carbine Stock - Mil-Spec is a direct replacement buttstock for AR15/M4 carbines. The sleek profile, dual-side release latches, and waterproof battery tubes make it the slimmest storage tube stock available. The SL-S provides an enhanced cheek weld and true, O-ring sealed, 10m waterproof storage area desired by many, but fits it into the narrowest package possible to allow a more upright head position and minimize bulk.

In stock
+ −
Magpul MOE SL-K Carbine Stock Mil-Spec
€53.24  

A drop-in replacement buttstock for AR15/M4 Mil-Spec carbine buffer tubes, the SL-K is designed for compact PDW style weapons or users desiring a small and light stock. Features a shorter and slimmer profile, a smaller rubber butt-pad with rolled toe for easy shouldering and sure grip, and a 1.25" footman's loop with the ability to accept an optional M-LOK QD Sling Mount for push-button style QD sling swivels.

In stock
+ −
Magpul M-LOK T-Nut Replacement Set
€8.16  

The M-LOK T-Nut Replacement Set is a replacement hardware pack designed for use with all M-LOK accessories. Made of 4140 Chromoly Steel with a Mil-Spec Manganese Phosphate finish, the hardware set is supplied with two T-Nuts as well as two different length button-head cap screws to ensure compatibility with various hand guard or forend thicknesses.

Out of stock
Magpul M-LOK Bipod Mount
€27.01  

The Magpul M-LOK Bipod Mount allows for the attachment of most Harris®-style stud mounted bipods to M-LOK compatible hand guards and forends. The M-LOK Bipod Mount offers a low-profile, robust, and elegant mounting solution for the most common bipods on the market.  By utilizing the direct-connect properties of the M-LOK system, the bipod sits closer to the mounting surface than other adapters while providing superior support to the bipod for strength and stability.

Out of stock
Magpul AFG-2 M-LOK Adapter Rail
€10.62  
The Magpul AFG-2 M-LOK Adapter Rail is a polymer M-LOK accessory rail that is optimized for the attachment of the Magpul AFG-2 to all M-LOK compatible hand guards and forends except for the MOE AKM Hand Guard, MAG620. Molded of the same high quality material as other Magpul Polymer Rails, the AFG-2 M-LOK Adapter Rail has the same footprint as the AFG-2 and lower profile than a standard Picatinny rail to ensure a seamless transition between the different components.
In stock
+ −
MAGPUL ZHUKOV-S Stock
€147.50  

Product Details

The Magpul Zhukov-S Stock is a no-compromise folding stock for the modern AK. The Zhukov-S Stock casts aside traditional AK stock shortcomings and offers a folding, collapsible stock with QD sling mounts, modular Cheek Risers, and a shock-absorbing rubber butt-pad for superior traction. 

 The Zhukov-S has right-side folding for compatibility with side-mounted optics. Designed to fit most common stamped AK receivers without modification via a unique wedge block, the durable injection molded polymer Zhukov-S Stock redefines the human interface with the AK platform.

 

In stock
+ −
Magpul PMAG 10 7.62 AC AICS Short Action
€49.14  
A higher-capacity version of our proven PMAG 5 7.62 AC, the PMAG 10 7.62 AC is a reliable and durable polymer magazine for the .308 Winchester-based family of cartridges.
In stock
+ −
Magpul PMAG Ranger Plate for AR/M4 GEN M3 - 3 Pack
€27.83  
The Magpul PMAG Ranger Plate is a floorplate replacement for the 5.56x45 PMAG AR/M4 GEN M3 magazines. It incorporates an integral loop similar to the original Magpul USGI Ranger Plate. When installed on the base of the magazine, the PMAG Ranger Plate provides unsurpassed speed and control during high stress, tactical magazine changes.
In stock
+ −
Magpul MOE-K2+ AR15/M4 Grip
€25.37  
The MOE-K2+ Grip combines reinforced polymer body construction with comfortable, wrap-around rubber overmolding for maximum weapon control in adverse environments. Similar in concept to the smaller MOE-K, the MOE-K2 is a drop in upgrade for AR15 / M4's that offers a more vertical grip angle, but in a full-size grip design. The steeper vertical grip angle is optimized for use on PDW configurations and improves comfort and control on short LOP rifles that bring the primary hand in closer to the shooter's body.
In stock
+ −
Magpul MOE-K AR15/M4 Grip
€22.91  
Designed as a drop-in upgrade for the standard AR15/M4 pistol grip, the MOE-K Grip provides an extremely low profile and compact design with a steeper grip angle compared to more traditional styles. The more vertical grip angle is optimized for use on PDW (Personal Defense Weapon) configurations and improves comfort and control on short LOP rifles that bring the primary hand in closer to the shooter's body. The thin profile and lack of backstrap 'beavertail' also makes it an excellent choice for shooters who prefer a smaller grip circumference.
In stock
+ −
Magpul ACS-L Carbine Stock
€98.32  
The Magpul ACS-L (Adaptable Carbine Stock - Light) Mil-Spec is a drop-in replacement buttstock for AR15/M4 carbines using Mil-Spec sized receiver extension tubes. A streamlined version of the ACS, the ACS-L utilizes the same center storage compartment and cheek weld but removes the battery tubes for a slimmer, lighter weight package.
In stock
+ −
Magpul ACS Carbine Stock
€106.52  
The Magpul ACS (Adaptable Carbine/Storage) - Mil-Spec model is a drop-in replacement buttstock for AR15/M4 carbines using Mil-Spec sized receiver extension tubes. Dual, rear accessible, water-resistant battery storage tubes and an integral storage compartment in the butt of the stock provides multiple storage options.
In stock
+ −
Magpul MOE SL Carbine Stock
€73.73  

The MOE SL Stock– Commercial-Spec Model (MOE Slim Line) is a drop-in replacement buttstock for AR15/M4 carbines using Commercial-Spec sized receiver extension tubes. Designed for the modern battlefield, the sleek profile, dual-side release latches, rolled toe, and angled rubber butt-pad are optimized for use with body armor or modular gear and provides for efficient shoulder transitions.

In stock
+ −
Magpul PMAG 30G MagLevel for HK G36
€36.84  
The PMAG 30G MagLevel® – HK® G36 (5.56x45 NATO) is a durable, lightweight, highly reliable 30-round polymer magazine designed specifically for the Heckler & Koch G36. It features an advanced impact-resistant polymer construction and an easy to disassemble design with a flared floorplate for positive magazine extraction from pouches. The PMAG 30G utilizes a resilient Milspec black oxide coated stainless steel spring for corrosion resistance and an anti-tilt, self-lubricating follower for increased reliability. It is compatible with all PMAG floor plate accessories.
Out of stock
Magpul PMAG 10/30 AR/M4 GEN M3 Limited to 10rds
€26.19  
The PMAG 10/30 AR/M4 GEN M3 is a 10-round polymer magazine for AR15/M4 compatible weapons chambered in 5.56x45 NATO/.223 Remington. It was designed for users who reside in areas with magazine capacity restrictions but desire a standard 30-round magazine form.
In stock
+ −
Magpul Enhanced Ejection Port Cover
€20.45  
The Enhanced Ejection Port Cover is a drop-in upgrade designed to provide an improved installation process, physical strength, and corrosion resistance over the standard USGI ejection port cover. Traditional stamped-steel ejection ports are malleable, prone to corrosion, and require tools to install. The Enhanced Ejection Port Cover snaps into place easily on forged Mil-spec uppers without having to remove your hand guard or barrel nut, wind any loose springs, or adjust small e-clips. Constructed of impact-resistant injection molded polymer, it is corrosion resistant and will not bend or deform from impacts.
In stock
+ −
MAGPUL PRS LITE AR15/AR10 STOCK BLACK
€139.30  
In stock
+ −
Magpul MOE® K2-XL Grip
€23.73  
Designed for use with larger hands, the K2-XL Grip is similar to our MOE-K2® Grip – AR15/M4 but it's nearly 25% bigger. A drop in upgrade for the AR15/M4, it offers a more vertical grip angle, improving comfort and control on short LOP rifles that bring the primary hand in closer to the shooter's body. The larger size of the grip also allows proper finger placement in precision shooting, helping improve accuracy.
Out of stock
Magpul PMAG® 10 rd 5.56 AC AICS Short Action
€49.14  

The PMAG® 10 5.56 AC is a polymer 5.56x45 NATO (.223 Remington) magazine designed for short action Accuracy International Chassis Systems (AICS) pattern bottom metal, including the Bolt Action Magazine Well for the Magpul Hunter family of stocks. Designed with many of the same qualities that make our PMAGS the most reliable and durable in the world, the PMAG 10 5.56 AC features GEN M3 technology, including a self-lubricating follower, a stainless-steel spring, and constant-curve internal geometry for smooth feeding.

In stock
+ −
Ergo AR15 SHUREGRIP The Original Ergo Grip
€28.69  
The Original ERGO Grip, designed for performance creates a better interface between the shooter and firearm. The Ergo Grip is still the standard by which positive grip and shooter comfort are measured. The Ergo Grip comes with the proprietary Gapper™ for increased comfort.
Out of stock
S&W M&P15-22 Extractor
€20.49  
Smith & Wesson M&P15-22 Extractor. This extractor is manufactured for the Smith & Wesson M&P15-22 blowback-operated rifles chambered in .22 LR. The extractor is installed onto the bolt assembly and is responsible for extracting spent ammunition. Machined from steel and featuring a black finish, this component is perfect as a spare on the workbench or as an immediate replacement for a lost or damaged piece.
In stock
+ −
S&W M&P15-22 Extractor spring
€9.84  
Smith & Wesson M&P15-22 Extractor Spring. This extractor spring is manufactured for the Smith & Wesson M&P15-22 blowback-operated rifles chambered in .22 LR. The extractor spring applies tension so that the extractor can function appropriately. This steel component is perfect as a spare on the workbench or as an immediate replacement for a lost or damaged piece.
In stock
+ −
S&W M&P15-22 Firing pin
€20.49  
Smith & Wesson M&P15-22 Firing Pin. Constructed from quality steel and featuring a black finish, this firing pin is specifically manufactured for the Smith & Wesson M&P15-22 blowback-operated rifles chambered in .22 LR. This component is installed into the bolt assembly and is responsible for striking the primer of the chambered round. Perfect as a spare or immediate replacement, this S&W piece will keep your Smith & Wesson AR in top operating shape.
In stock
+ −
HIPERFIRE AR15 Enhanched Duty Trigger - Sharp Shooter
€106.52  
HIPERFIRE AR15 Enhanched Duty Trigger - Sharp Shooter
In stock
+ −
ODIN AR15 RUNE Handguard
€155.70  
15.2"
The RUNE is the latest addition to the ODIN Works modular, free-float rail systems. With its sleek and simple design, it fits comfortably into your hand allowing for quick and accurate target acquisition. Constructed out of high-grade Aluminum and weighing in at just over 6 oz, the RUNE is also one of the lightest hand guards on the market to date.
In stock
+ −
ODIN Adjustable AR15 CLAMP-ON Gas Block 0,750''
€98.32  
The Clamp on Adjustable Gas Block from ODIN Works is truly adjustable and packed with features. Machined from steel and black nitrided for durability, our clamp on adjustable gas block is equipped with a front facing stainless steel adjustment screw and spring to handle high temperatures. 20 clicks of ball detent adjustment, no set screws needed, simply adjust the stainless screw where you want it and you’re done.
In stock
+ −
ODIN Tunable AR15 Gas block
€61.48  
Set it and forget it! Easily achieve perfect gas cycling with our stainless steel, black nitrided tunable low profile gas block. Easily tune your rifle and make adjustments if you're changing ammo or adding a suppressor. This gas block is included with all DI ODIN Works barrels.
Out of stock
Geissele Super 3 Gun S3G Replacement Spring kit
€24.55  
Replacement Springs for the Super 3 Gun (S3G), Super Dynamic 3 Gun (SD-3G), and Large Pin Super 3 Gun triggers.
In stock
+ −
KYNTEC KynSHOT RB5000 Standard Damped AR15 .223 Hydraulic Buffer
€139.30  
The RB5000 KynSHOT Recoil Buffer is designed to fit AR-15 carbines with a collapsible stock. Made using 17-4 stainless steel, the KynSHOT RB5000 Recoil Buffer is a proven system that has seen heavy use with civilian competition shooters, law enforcement personnel and the United States Armed Forces.
Out of stock
Magpul MIAD/MOE CR123A Battery Storage Core
€13.12  
Internal core unit for the MIAD®, MOE®, MOE-K2®, and MOE® AK Grips*. Designed to hold two (2) CR123A lithium type batteries in a self contained, water-resistant unit. Rubber cap is captured to the unit and can be opened with a push of the thumb.
In stock
+ −
Magpul Ladder Rail Panel
€12.30  
Ladder Panels offer very low-profile 1913 Picatinny rail coverage. The Santoprene material provides a rubbery surface for improved weapon control and rail protection.
In stock
+ −
Geissele Sig Sauer MCX Super Charging Handle
€147.50  
The MCX Super Charging Handle (SCH®) is 3D machined from a solid block of aircraft grade 7075-T6 aluminum and made specifically for Sig Sauer’s MCX platform. Its ambidextrous design allows for seamless operation from either side of the weapon. The levers are dual contoured similar to that of the charging handle of an M14, where not only the x-axis but also the y-axis receive radius cuts.
In stock
+ −
ODIN Adjustable Buffer AR15 Heavy
€61.48  
ODIN Works is always looking for new ways to make your build as customizable as possible to fit you, the shooter. This adjustable buffer does just that. Available to fit AR-15 platforms, each buffer also comes with multiple weights to customize the weight combination for your personal build.
In stock
+ −
ADC Castle Nut + Plate for M4 Carbine
€13.12  
In stock
+ −
ADC M4 Carbine Buffer Utež 92g
€27.87  
Out of stock
ADC M4 Carbine Buffer Tube
€29.51  
Out of stock
ADC M4 Carbine Standard Spring
€12.30  
Out of stock
Ruger 10/22 .22lr 25rd Magazine
€32.75  
The RUGER BX-25 Magazine, 22 LR, 25 Rd, Polymer Black (90361) is absolutely flawless. This genuine magazine with Ruger logo has been tested and has proven to feed as reliably as the standard BX-1 10-round Ruger rotary magazine. The BX-25 magazine will work with any factory original Ruger 10/22 rifle, SR-22 rifle, and 22 Charger pistol.
Out of stock
ASE UTRA .223 HiPer Bore Lock Flash Hider 1/2x28 UNEF
€95.49  
The Hiper flash hider is an extremely efficient flash hider. The tapered alignment surface before the attachment thread effectively blocks fouling from entering the mounting surfaces and allows for ease of attachment and removal. HiPer flash hiders are available to a variety of weapon types. Compatible with Bore Lock suppressors.
Out of stock
ASE UTRA .223 Bird Cage Bore Lock Flash Hider 1/2x28 UNEF
€95.49  
Traditional flash hider solution compatible with Bore Lock Suppressor systems.
Out of stock
ASE UTRA .30/.338 BoreLock Muzzle Brake 5/8x24 UNEF
€95.49  
The two-part design of the BoreLock muzzle brake provides for secure, simple, and quick installation. No washers or shims required, thus allowing for precise alignment. Designed to allow quick attach/detach of ASE UTRA silencers.
Out of stock
T-Arms WIDOW Charging Handle for Tippmann M4-22
€65.53  
T-arms WIDOW is an aluminum charging handle for the TIPPMANN M4-22 rifles. It enables easier use due to enlarged handles and also offers greater durability.
In stock
+ −
T-Arms AR15/PCC 9.5"-15" Alu Handguard
€147.50  
13,5"
High quality CNC milled aluminium handguard for AR15 platform compatible weapons. Wery light and strong.
In stock
+ −
T-Arms Alu Charging Handle for Smith & Wesson MP15-22
€65.53  
In stock
+ −
HIPERFIRE HIPERTOUCH Reflex AR15 Trigger
€221.27  
Hiperfire Hipertuch Reflex trigger is an enhanced AR15 trigger with Pull Weights of 2½ - 3½ lbs. Very desirable for precision and dynamic sports shooting. Extreme crisp action with clean breake and fast reset.
In stock
+ −
T-Arms TIGER AMBI Charging Handle for Tippmann M4-22
€65.53  
T-arms Tiger is an aluminum charging handle for the TIPPMANN M4-22 rifles. It enables easier use due to enlarged handles and also offers greater durability.
In stock
+ −
CMMG 9ARC Adapter for AR Magazine 2-pack
€73.73  
2-pack CMMG’s 9 AR Conversion makes it possible to shoot 9mm ammunition from your unmodified AR15 lower receiver when paired with a CMMG 9mm Radial Delayed Blowback upper.
In stock
+ −
UTG AR15 Platform Anti-Wobble Wedge
€2.50  
Out of stock
CAA Rail Covers 4pcs
€16.39  
In stock
+ −
AR15 KeyMod Handguard Slim 9"
€35.16  
Out of stock
Del-Ton AR15 Essential Repair Kit
€16.35  
Contains Springs that are commonly used or lost when dissasembling or cleaning your AR.
Out of stock
1 2 3