Select your country here
Please select your country
El carrito esta vacío
No se ha encontrado ningún articulo con el criterio de búsqueda elegido.
Ace's skeletonized stock for the AR-15 rifle. Closed cell foam overtube provides an extremely comfortable cheek weld. Uses A2 buffer tube, rifle length buffer and rifle length buffer spring (NOT INCLUDED). Foam overtube, buttpad and all needed mounting hardware included. Length 10" Weight 11.2oz
Note: Comes only with ARFX Stock and Foam Overtube. Does not include A2 Extension Tube, Rifle Buffer, Or Rifle Buffer Spring.
Factory 25-round magazine for Smith & Wesson M&P 15-22 rifles.
This is a one-piece molded polymer body with a textured gripping surface that has a 25 round capacity of .22 LR and features a load assist button.
Textured gripping surface and wide-cut windows.
M&P 15-22 magazines match NATO standard AR-15 magazines in size and nearly in capacity—making them perfect trainer mags and practical all-around choices for your kit.
The PMAG D-60 is a durable, lightweight, highly reliable 60-round 5.56x45 NATO/.223 Remington* polymer drum magazine for AR15/M4 compatible weapons.
With a larger capacity than previous PMAGs, the PMAG D-60 gives the shooter 60 rounds of ammunition, effectively allowing the same round count as two standard capacity 30-round magazines without requiring a critical reload.
Product Details
The Magpul MOE AK Hand Guard is a replacement for standard AK pattern rifles without a front sling loop on the hand guard retainer. Featuring an extended gripping portion, integrated heat shield, M-LOK® mounting capability, and replacement gas tube cover, the MOE AK Hand Guard is an upgrade to any AK pattern rifle.
Made in U.S.A. Hand Guard counts as one US compliance part for 922(r).
The all-new NCT3 compensator, designed to eliminate recoil and muzzle climb while being tailored to your exact requirements. Available for .223 or 9mm bore diameters.
Compensator specially designed for sports activities, it is ideal for long barrel carbines.
Its side windows give stability and neutrality to the weapon, minimizing the nose-up and getting back on target cracking followup shots as fast as possible.
The special radial holes located at the base of each window have been specially designed to dampen the recoil.
Functional for both close and long range shooting.
The elongated shape combined with the windows gives a distinguishable and refined image.
It is made of high quality steel and subjected to heat treatments in order to make the non-stick surface to gunpowder residues.
Thread 1/2×28
Current Handgun pistol grips were carefully considered and reviewed to create a modern full-sized AR pistol grip that offer positive support and control for one handed operations. The finger swell and grooved back straps provide a positive grip surface with wet or gloved hands
? Increases operator comfort and weapon performance, providing more control during reloading and firing? Tab covers the receiver gaps that cause discomfort during sustained usage and can be easily removed if desired? Designed for M16/M4/AR15/HK41? Full Size Pistol Grip? Optimal for one handed operation
Weight: 2.5oz
Height: 1.2"
Width: 1.341"
Length: 2.543"
The Geissele Hi-Speed National Match Trigger Series is designed for NRA High Power Rifle competition with highly modified match-grade AR-15-type rifles. The Service Rifle, Designated Marksman Rifle, and Match Rifle Spring sets are all included in this purchase.
MBX "Fang" CTR & Hogue Stock Extensions
For installation on the Magpul model CTR, this extends the factory Butt Stock to allow for deeper and more stable contact with the shoulder pocket allowing for greater recoil control and added stability when reloading along with a raise stance when used in conjunction with the MBX off set mount.
BT12-QK: Standard Height Accu-Shot® Precision Rail Monopod
The BT12-QK is our standard height Precision Rail Monopod (PRM) with QK01 Quick Knob. Attaches to standard 1913 Picatinny rail. Available in black only.
Elevation Range: 3.75 – 4.65”
Folded Length: 3.85" approximate
Weight: 7.4 ounces
The Magpul CTR (Compact/Type Restricted) – Mil-Spec Model is a drop-in replacement buttstock for AR15/M16 carbines using mil-spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation.
The CTR also features a supplemental friction lock system that minimizes excessive stock movement for enhanced weapon stability* and an ambidextrous QD sling mount that will accept any push-button sling swivel. The Mil-Spec Model includes a standard 0.30" thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.
Made in U.S.A.
Designed to considerably improve the speed and efficiency of the AR15/M16 bolt catch, the B.A.D. Lever quickly addresses reloading and malfunction clearance shortcomings of AR15/M16 platforms by extending a paddle to the right side of the weapon, allowing manipulation of the bolt stop from the fire control/ready position with the right-hand trigger finger.Made from milspec-anodized aluminum, the B.A.D. Lever attaches to the standard AR15/M16 bolt release without permanent modification to the weapon. Functional for both left and right-handed shooters, the B.A.D. Lever also allows traditional bolt catch manipulation according to the AR15/M16 manual of arms. All mounting hardware included.
The Magpul M-LOK AFG (Angled Fore Grip) is the result of research and refinements done to the original AFG and AFG-2. By integrating the direct-attach M-LOK mounting system with minimalist construction we were able to produce a high strength grip that only weighs 1.2 ounces, including hardware.
Allowing for a wider range of mounting location options, the M-LOK AFG is ¾" shorter than the AFG-2 while maintaining a similar gripping surface area. Even though the M-LOK AFG is more compact than its predecessors it continues to take into account natural body mechanics to provide a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the M-LOK AFG helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.
NORDIC COMPONENTS AR1-15 FORGED UPPER RECEIVER- STRIPPED
Super Dynamic Enhanced SD-E AR Trigger
The Geissele Super Dynamic-Enhanced (SD-E) Trigger featuring an exclusive flat trigger bow, is a finely-tuned two stage trigger providing enhanced trigger control and weapon accuracy while maintaining the robustness and reliability of our combat-proven two-stage trigger.
The UBR GEN2 is an adjustable stock for AR15/M4 and AR10/SR25 platforms, designed to offer similar strength and stability as a fixed stock with a consistent and comfortable cheek weld in any position.
An update of the revolutionary Utility/Battle Rifle (UBR) stock, the UBR GEN2 features a fixed cheek piece to provide a consistent cheek weld in any of its eight positions, and is compatible with Carbine as well as A5 and SR-25 length buffer systems. Designed to accommodate large bore AR calibers and withstand severe impacts, the UBR GEN2 is nearly five ounces lighter while retaining all the durability its predecessor was legendary for. Comes standard with front and rear QD sling attachment points, two footman’s loops, the ergonomic MOE SL™ angled-toe rubber butt-pad, and customizable storage compartment.
The PRS GEN3 is a field precision stock for AR15/M16 and AR10/SR25 platforms, featuring tool-less length of pull and cheek piece height adjustment.
With solid adjustments for length of pull and cheek piece height via aluminum detent knobs, the PRS GEN3 (Precision Rifle/Sniper) stock provides a stable interface and is intended for semi-automatic sniper or varmint type rifles. Offering a nearly universal fit, it is optimized for rifle-length receiver extensions but will also mount to many mil-spec carbine and A5-length tubes*. Includes a cant/height-adjustable rubber butt-pad and rotation-limiting QD sling swivel cups as well as M-LOK® slots on the bottom for rear monopod mounting.
Nordic Components, The M-LOK QD Sling Mount Provides a Forward Attachment Point For a Push-Button QD Sling, Machined From Milspec Anodized Aluminum, The Low-Profile M-LOK QD Sling Mount Features Beveled Edges to Reduce Snagging and Has an Anti-Rotation Design That Prevents Swivels From Spinning, All Hardware Necessary for Attachment Directly to M-LOK Slots is Included
A recoil reducer designed to eliminate vibration and annoying noise that characterizes the operation of AR platforms.
The package includes the spring system and thickness body for potential use of fixed calcium.
Choose between either our 16”and 18'' .223 Wylde or 11.5” 5.56 barrels
The AFG-2 is a slim line design that is shorter in overall length and width compared to the original AFG. Smaller size allows for mounting on a wider variety of railed hand guards and better compatibility with rail covers and accessory mounts. Compatible with most any M1913 Picatinny-railed hand guard, the Magpul AFG-2 (Angled Fore Grip) takes into account natural body mechanics and provides a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control.
By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the AFG-2 helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots.
The four-piece XTM Hand Stop Kit serves as a lightweight, low-profile rail mounted index point for improved weapon control, or as a forward stop to prevent the shooter's hand from reaching the hot front sight assembly or muzzle. The kit includes one Hand Stop, one Index Panel, one full XTM Enhanced Panel, and one XTM Enhanced Half Panel.
Pimp your AR !!! Toni System is the adress to look for functionality, quality and design.
To pesonalize your AR you can choose different colors
To enhance and speed up the handling of your AR, look no further, TONI System has the right parts.
Gas Tube Kit, Rifle
The latest innovation of Velocity Triggers is Diamond Like Carbon Coating (DLC) on the trigger which will give your Velocity Trigger the highly effective combination of a low coefficient of friction and high micro-hardness, its also a surface that will not rust and gives your trigger a deep dark black color.
Simply stated, the Diamond Like Carbon Coating (DLC) results in a greater wear resistance over the life of the trigger.
Finally, a high quality AR-15 trigger that makes your AR feel like a bolt action rifle.
Parts Kit, AR15, Bolt Rehab
JP Enhanced Reliability Spring Kit
This spring kit will yield a 3.5-4.0 lb. trigger pull with JP Fire Control parts. This kit is intended for use with JP trigger parts and will not necessarily yield substantial change on standard AR-15 trigger components.
Application: Use of this spring kit allows for use of ammunition with low-sensitivity primers such as those found in NATO-spec and various foreign-manufactured ammunitions, but in the case of large-frame ARs and duty/defense rifles, domestic-manufactured ammo is strongly recommended to ensure 100% ignition reliability.
Seekins Precision, Safety Selector Kit, Red Finish
90 degree standard throw lever
60 degree short throw lever
Available in black or color anodize
Drop in replacement for Mil-Spec selector switch
Fully ambidextrous
Compatible with Ruger Precision Rifle
Mil-spec 6-position buffer tube manufactured from 7075 aluminum with black anodized finish.
Tube only; endplate and castle nut not included
TTI Firepower PMAG Magazine Extension
- Designed to work with stock spring.
- Overall weight 2.1oz.
- Length, 1 inch.
- Patented, proven push-pin design.
- Easily attaches and detaches from the magazine.
- No specialty tools, devices, or additional springs required for assembly/disassembly, simply pop off the insert at the bottom of the spring and slide on the extension.
- One piece design; no small parts to keep track of.
- Minimal length addition to allow usage while in a prone position.
- Holds 35+1 rounds on the PMAG30.
- Holds 46+1 rounds on the PMAG40.
- The added weight helps the magazine drop free easier for faster reloads.
- CNC machined from billet aluminum.
- Hard anodized.
Safety sel. ambi 90°-45°
Safety selector ambi that offers the option of being installed at 90 degrees or 45 degrees.
It has a central screw that allows safe adjustment, making it perfectly operational both assembled on the trigger kit ULTRA and on all other trigger group on the market.
The package includes a short external lever and a reversible standard one that allow ambidextrous use.
The aesthetic peculiarity is the shape of the ace of spades, the ADC brand.
This stock uses Ace?s original soft foam overtube for the ultimate cheek weld. A billet machined gusset reinforces the receiver extension tube at its weakest point directly behind the receiver. Precision machined aluminum butt clamps directly to the RET and provides a machined in sling mount.
The Competition handguard is 100% made in Italy, CNC machined, it was designed specifically for sports activities; for this purpose it has been heavily lightened by making millings which optimize its grip and allow the regulation of our gas block ADJ. from the outside.
Round, free-float profile, it has double barrel nut, both inside and outside.
The holes positioned throughout its length allow mounting from outside the picatinny sections every 22.5 °.
Material: 6082 aluminum, hard black anodizing
Available lengths: 15,5”
Weight (without barrel nut): 208 gr
Width: 50 mm
Inside Diameter: 35mm
The Competition handguard is 100% made in Italy, CNC machined, it was designed specifically for sports activities; for this purpose it has been heavily lightened by making millings which optimize its grip and allow the regulation of our gas block ADJ, from the outside.
M-Lok, Free-float profile, it has double barrel nut, both inside and outside.
The holes positioned throughout its length allow mounting from outside the picatinny sections
Available lengths: 15”
Weight (without barrel nut): 240 gr
Spectrum
Compensator ideal for tactical use, whose maximum yield is with short barrel carbines.
The side windows, specially tapered to dampen the recoil and at the same time break the flame. The upper holes, on the other hand, give the weapon stability and neutrality, minimizing the nose-up and reducing the twist. Lastly, the four frontal tips allow this compensator to be used as a means of breaking.
It is made of high quality steel and subjected to high-hardness heat treatments with the double end to make the non-stick surface to the gunpowder residues on one side and robust on the other.
Desgined for use with 22LR AR conversions. 25rd Capacity.
JP .223 Enhanced Gas Rings
As a replacement for traditional three-piece gas rings, the JPEGR-223 utilizes a one-piece design similar to the McFarland rings. Unlike the McFarland rings, though, our precision-ground gas rings are engineered to precisely suit small-frame carrier group components such as our own JP EnhancedBolt™.
After testing numerous minute grind callouts, the final JP Enhanced Gas Rings spec is the perfect balance of a solid gas seal with a very low-friction relationship between rings and bolt carrier. Reducing the resistance between these components directly results in an overall increase in the rifle's operational window while the edge of the rings utilizes the cycling action itself to scrape the walls of the carrier, helping shed fouling with every shot.
The Magpul® Enhanced Rubber Butt-Pad, 0.70" is an optional replacement butt pad for the CTR® and MOE® Mil-Spec stocks as well as the original UBR®, all STR®, ACS-L™ and ACS™ stocks.
It is designed for enhanced shoulder purchase as well as offering slightly improved recoil reduction with its thicker, vented construction. The Enhanced Rubber Butt-Pad can also be installed on Commercial-Spec MOE®/CTR® stocks, but may prohibit use of fully collapsed position due the extended, slanted back of most commercial-spec receiver extensions.
All mounting hardware included.
This compensator and recoil reducer, with unusual and futuristic design, is designed to provide finest sports performance with steel case ammunition.
he Seekins Precision DNA Charging Handle offers a full body and textured grip surface to improve user controls. Our team set out to create a product that would not only offer ergonomic fit and function, but also aesthetic design. Crafted in a climate controlled laboratory by a team of scientists who were only allowed to use their right hands, we can proudly say the DNA handle is the most non-ambidextrous charging handle in our product line up. Really, it's just a charging handle, a very non-ambidextrous one. Enjoy!
Our Gun builders kit includes most of the necessary parts to build up your lower group except the commonly upgraded parts. Does not include Trigger Guard, Fire Control Group, and pistol grip.
Ideal for sports activities, it is advisable to use it on long barrel carbines, both for close-range and long-distance shooting.
A truly ergonomic, shooter focused flat top grip for AR platform rifles and chassis systems. Designed for performance by creating a better interface between the shooter and firearm, the Ergo Grip is still the standard by which positive grip and shooter comfort are measured. The Ergo Grip comes with the patented Gapper™ for increased comfort. Very similar in size to the Original ERGO Grip
The MOE Stock – Mil-Spec Model (Magpul Original Equipment) is a drop-in replacement buttstock for AR15/M16 carbines using mil-spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation.
The Mil-Spec Model includes a standard 0.30" thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.
Designed as a drop-in upgrade for the standard AR15/M4 pistol grip, The MOE-K Grip provides an extremely low profile and compact design with a steeper grip angle compared to more traditional styles. The more vertical grip angle is optimized for use on PDW (Personal Defense Weapon) configurations and improves comfort and control on short LOP rifles that bring the primary hand in closer to the shooter's body. The thin profile and lack of backstrap 'beavertail' also makes it an excellent choice for shooters who prefer a smaller grip circumference. All mounting hardware included.
Features
The Magpul PMAG Ranger Plate is a floorplate replacement for all 7.62x51 PMAG LR/SR GEN M3 magazines that incorporates an integral loop similar to the original Magpul USGI Ranger. When installed on the base of the magazine, the PMAG Ranger Plate provides unsurpassed speed and control during high stress, tactical magazine changes.
The PMAG Minus 10 Round Limiter installs in 20 or 30 round GEN M3 PMAG bodies, reducing the magazine capacity by ten rounds. Designed for sporting and hunting applications, installation of the Limiter is simple, tool-less, and requires no permanent modification of the magazine body.
NOTE: Will NOT make a banned magazine legal! This product is intended for TEMPORARY capacity reduction of PMAG AR/M4 GEN M3 magazines. This product does not constitute a permanent capacity reduction. The user is responsible for knowing applicable laws in any jurisdiction that restricts magazines based on capacity or regulates magazine capacity for hunting. Please check all laws and regulations of your state and locality to determine the legality of your host ammunition magazines.
The MagLink is a coupler for PMAG 30 and 40 round AR/M4 magazines* which allows the user to attach two magazines together for more efficient speed reloads, and to keep additional ammunition accessible on the weapon at all times. The MagLink features a two-piece bolt on design and durable, lightweight reinforced polymer construction.
The square side windows have been specially designed to dampen the recoil, the holes give stability and neutrality to the weapon, minimizing the nose-up. Lastly, the four front propellers, staggered by each other, allow the contrast of the grooves of the barrel, decreasing the twist.
BUTTSTOCK, PISTOL GRIP(NTG), & M-LOK VERTICAL FOREGRIP COMBO - MIL SPEC +®
The Daniel Defense adjustable buttstock is constructed of a proprietary blend of glass infused polymers and finished off with soft touch rubber overmolding in strategic points. The new buttstock is precision formed for mil-spec receiver extensions to have very little forward or lateral play that is so common in many other buttstocks. This eliminates the need for a tensioning device or friction lock. All of this results in a durable buttstock that will give the shooter a comfortable and repeatable cheek weld and unprecedented control of the firearm. The buttstock can be run with one of two included buttpads or without any buttpad at all to custom fit the rifle to whatever gear the operator must wear. The buttpads come in two sizes: a thicker convex shape (0.8”), and a thinner concave shape (0.5”); designed to keep from snagging when shouldering the rifle. Limited rotation QD swivel attachment points are integrated on both sides of the buttstock for ambidextrous sling connection.
PISTOL GRIP
The new Daniel Defense pistol grip is an improvement to the old standby A2. We designed our grip with ergonomics and controllability in mind. Our grip shares the angle of the classic 1911 pistol for the most natural hand position and comfortable feel. This pistol grip incorporates an oversized trigger guard covering the gap between grip and lower receiver which can wear on the shooters hand and easily accommodates for gloves. Installation is simplified by the fact the integral trigger guard doesn’t require a roll pin so there is a reduced chance of damaging the lower receiver. A soft touch overmolding section enhances grip, wet or dry.
SUPER DYNAMIC 3 GUN (SD-3G) TRIGGER
The Geissele Super Dynamic 3 Gun (SD-3G) Trigger is based on the S3G Trigger. Like the S3G, the SD-3G has a shortened pull length and a lightning-quick reset to give it a unique, hybrid trigger pull that is a cross between a traditional two-stage and single-stage trigger while still retaining the safety and robustness of a two-stage combat trigger. The SD-3G’s flat trigger bow further enhances the trigger’s performance by reducing the perceived pull weight and improving the trigger’s tactile feedback to the operator making it ideally suited for 3 Gun competition shooting.
The MOE Rifle Stock (Magpul Original Equipment) is a drop-in replacement for AR15/M16 A1 and A2 rifle stocks utilizing the standard rifle-length receiver extension (buffer tube).
Designed as a basic upgrade, the stock features integral 1.25" sling loop, optional dual-side front and rear QD mounting points, replaceable anti-slip rubberized butt-pad, and internal storage compartment accessible through the rear storage door.
Internal core unit for the MIAD as well as the MOE® and MOE-K2® Grips* designed to hold one (1) standard AR15/M4 complete bolt and firing pin.
Knights Armament Company, Top Rail Rubber Thumb Rest, Fits Picatinny, Black Finish
The Magpul AR Enhanced Magazine Release provides an enlarged contact surface for quick and fumble free magazine changes.
With easy bolt-on installation with no gunsmithing required, the Enhanced AR Magazine Release is made of Mil-Spec hard anodized aluminum to provide durability and light weight.
Ideal for sporting use, this has been made lighter than the standard A2 and it is therefore compatible with our lightweight carriers and spring A2.
It can be used only with fixed stocks.
Weight: 85 g
The MOE Fixed Carbine Stock – Mil-Spec Model (Magpul Original Equipment) provides an inexpensive, fixed, non-collapsing stock option for mil-spec size carbine-length buffer tubes.
The MOE Fixed Carbine Stock has a slim profile, improved cheek weld, and multiple sling attachment options, and is compatible with ASAP®Plates and PRS® Extended Rubber Butt-Pad. Installation is non-armorer and does not require the castle nut or lock plate to be removed.
BT15: 3.35" 1913 Rail
The BT15 - 3.35" 1913 Rail will accommodate hole patterns with a center to center spacing of 1.76 – 2.78" and a relieved back to accommodate curved surfaces. A standard sling stud and sling stud spacer can be used as one fastener or two button head machine screws can be used. NO HARDWARE IS INCLUDED. See BT1517 to attach this rail to the forearm of standard rifle stocks. Available in black only.
Bolt catch oversized both internally and externally. Visible prolonged internal flap that allows adaptability with all magazines. The knurled outer surface is great for improving its grip.
It is made of high quality steel and subjected to heat treatments to make the contact surfaces resistant and unaltered over time.
Springs for A2 Stock regular and light strength
The Enhanced Trigger Guard is a black anodized aluminum drop in replacement for the AR15/M4 weapons platform. It features a shallow "V" shape for better use of gloves in tactical shooting or cold weather operations. The Enhanced Trigger Guard is non-folding, has rounded edges, and fills the annoying "gap" at the rear of the standard trigger guard. All mounting hardware included.
Partes superiores
Bolts and recoil parts
Partes inferiores
Guardamanos y sistema de raíles
Frenos de boca de fuego
Cajas y empuñaduras
Partes del gatillo
Bloques de gas y tubos
Cargadores y partes
