Factory 25-round magazine for Smith & Wesson M&P 15-22 rifles.

This is a one-piece molded polymer body with a textured gripping surface that has a 25 round capacity of .22 LR and features a load assist button.

Textured gripping surface and wide-cut windows.

M&P 15-22 magazines match NATO standard AR-15 magazines in size and nearly in capacity—making them perfect trainer mags and practical all-around choices for your kit.

Nordic Components, Purpose-Designed for Mounting Accessories at the 11 O’clock or 1 O’clock Positions On the NCT3 Handguard, This Rail Has Additional Height to Allow Clearance From the Integral Top Rail, Designed For Use with All M-LOK Compatible Handguards, M-LOK Aluminum Rail Sections Allow the Attachment of Various 1913 Picatinny-Spec Rail-Mounted Accessories. Machined From Milspec-Anodized Aluminum, M-LOK Rail Sections Feature Beveled Ends to Reduce Snagging and Eliminate Sharp Corners

Nordic Component M-Lok accessories were designed for use with all M-LOK compatible handguards. M-LOK aluminum rail/QD sections allow the attachment of various mounted accessories. All hardware necessary for attachment directly to M-LOK slots is included

The all-new NCT3 compensator, designed to eliminate recoil and muzzle climb while being tailored to your exact requirements.  Available for .223 or 9mm bore diameters.

NORDIC COMPONENTS AR1-15 FORGED UPPER RECEIVER- STRIPPED

The latest innovation of Velocity Triggers is Diamond Like Carbon Coating (DLC) on the trigger which will give your Velocity Trigger the highly effective combination of a low coefficient of friction and high micro-hardness, its also a surface that will not rust and gives your trigger a deep dark black color.

Simply stated, the Diamond Like Carbon Coating (DLC) results in a greater wear resistance over the life of the trigger.

Finally, a high quality AR-15 trigger that makes your AR feel like a bolt action rifle.

BT15: 3.35" 1913 Rail

The BT15 - 3.35" 1913 Rail will accommodate hole patterns with a center to center spacing of 1.76 – 2.78" and a relieved back to accommodate curved surfaces. A standard sling stud and sling stud spacer can be used as one fastener or two button head machine screws can be used. NO HARDWARE IS INCLUDED. See BT1517 to attach this rail to the forearm of standard rifle stocks. Available in black only.

BT12-QK: Standard Height Accu-Shot® Precision Rail Monopod

The BT12-QK is our standard height Precision Rail Monopod (PRM) with QK01 Quick Knob. Attaches to standard 1913 Picatinny rail. Available in black only.

Elevation Range: 3.75 – 4.65”

Folded Length: 3.85" approximate

Weight: 7.4 ounces

The PMAG D-60 is a durable, lightweight, highly reliable 60-round 5.56x45 NATO/.223 Remington* polymer drum magazine for AR15/M4 compatible weapons.

 With a larger capacity than previous PMAGs, the PMAG D-60 gives the shooter 60 rounds of ammunition, effectively allowing the same round count as two standard capacity 30-round magazines without requiring a critical reload.

Product Details

The MagLink is a coupler for PMAG 30 and 40 round AR/M4 magazines* which allows the user to attach two magazines together for more efficient speed reloads, and to keep additional ammunition accessible on the weapon at all times. The MagLink features a two-piece bolt on design and durable, lightweight reinforced polymer construction.

Features

• Fits 5.56x45 PMAG 30 and 40 round AR/M4 GEN M2 MOE® and AR/M4 GEN M3™ magazines*
• Impact resistant polymer construction provides light weight and resists operational abuse
• Wide-set, two-piece bolt-on design resists flexing
• Integral grooves interface with PMAG ribbing to eliminate slippage

TONI SISTEM FIXED STOCK

Fixed stocks: specifically designed for pratical shooting, beyond its innovative design, it significatly reduces muzzle rise. Our AR stocks are available in 4 types: 7 inch for tactical shooting, 9 inch for dynamic, 11 inch for dynamic shooting and 11 inch from a fixed location with nose and butt adjustment.

Product Details

The Magpul Zhukov-S Stock is a no-compromise folding stock for the modern AK. The Zhukov-S Stock casts aside traditional AK stock shortcomings and offers a folding, collapsible stock with QD sling mounts, modular Cheek Risers, and a shock-absorbing rubber butt-pad for superior traction. 

 The Zhukov-S has right-side folding for compatibility with side-mounted optics. Designed to fit most common stamped AK receivers without modification via a unique wedge block, the durable injection molded polymer Zhukov-S Stock redefines the human interface with the AK platform.

Product Details

The Magpul CTR (Compact/Type Restricted) – Mil-Spec Model is a drop-in replacement buttstock for AR15/M16 carbines using mil-spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation.

The CTR also features a supplemental friction lock system that minimizes excessive stock movement for enhanced weapon stability* and an ambidextrous QD sling mount that will accept any push-button sling swivel. The Mil-Spec Model includes a standard 0.30" thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.

Made in U.S.A.

Product Details

The MOE Fixed Carbine Stock – Mil-Spec Model (Magpul Original Equipment) provides an inexpensive, fixed, non-collapsing stock option for mil-spec size carbine-length buffer tubes.

 The MOE Fixed Carbine Stock has a slim profile, improved cheek weld, and multiple sling attachment options, and is compatible with ASAP®Plates and PRS® Extended Rubber Butt-Pad. Installation is non-armorer and does not require the castle nut or lock plate to be removed.

 Made in U.S.A.

Product Details

The MOE Rifle Stock (Magpul Original Equipment) is a drop-in replacement for AR15/M16 A1 and A2 rifle stocks utilizing the standard rifle-length receiver extension (buffer tube).

Designed as a basic upgrade, the stock features integral 1.25" sling loop, optional dual-side front and rear QD mounting points, replaceable anti-slip rubberized butt-pad, and internal storage compartment accessible through the rear storage door.

Made in U.S.A.

Product Details

The PRS GEN3 is a field precision stock for AR15/M16 and AR10/SR25 platforms, featuring tool-less length of pull and cheek piece height adjustment.

 With solid adjustments for length of pull and cheek piece height via aluminum detent knobs, the PRS GEN3 (Precision Rifle/Sniper) stock provides a stable interface and is intended for semi-automatic sniper or varmint type rifles. Offering a nearly universal fit, it is optimized for rifle-length receiver extensions but will also mount to many mil-spec carbine and A5-length tubes*. Includes a cant/height-adjustable rubber butt-pad and rotation-limiting QD sling swivel cups as well as M-LOK® slots on the bottom for rear monopod mounting.

 Made in U.S.A.

Product Details

The UBR GEN2 is an adjustable stock for AR15/M4 and AR10/SR25 platforms, designed to offer similar strength and stability as a fixed stock with a consistent and comfortable cheek weld in any position.

 An update of the revolutionary Utility/Battle Rifle (UBR) stock, the UBR GEN2 features a fixed cheek piece to provide a consistent cheek weld in any of its eight positions, and is compatible with Carbine as well as A5 and SR-25 length buffer systems. Designed to accommodate large bore AR calibers and withstand severe impacts, the UBR GEN2 is nearly five ounces lighter while retaining all the durability its predecessor was legendary for. Comes standard with front and rear QD sling attachment points, two footman’s loops, the ergonomic MOE SL™ angled-toe rubber butt-pad, and customizable storage compartment.

 Made in U.S.A.

Product Details

The Magpul® Enhanced Rubber Butt-Pad, 0.70" is an optional replacement butt pad for the CTR® and MOE® Mil-Spec stocks as well as the original UBR®, all STR®, ACS-L™ and ACS™ stocks.

 It is designed for enhanced shoulder purchase as well as offering slightly improved recoil reduction with its thicker, vented construction. The Enhanced Rubber Butt-Pad can also be installed on Commercial-Spec MOE®/CTR® stocks, but may prohibit use of fully collapsed position due the extended, slanted back of most commercial-spec receiver extensions.

 All mounting hardware included.

 Made in U.S.A.

Product Details

Internal core unit for the MIAD as well as the MOE® and MOE-K2® Grips* designed to hold one (1) standard AR15/M4 complete bolt and firing pin.

 Made in U.S.A.

Product Details

The four-piece XTM Hand Stop Kit serves as a lightweight, low-profile rail mounted index point for improved weapon control, or as a forward stop to prevent the shooter's hand from reaching the hot front sight assembly or muzzle. The kit includes one Hand Stop, one Index Panel, one full XTM Enhanced Panel, and one XTM Enhanced Half Panel.

 Made in U.S.A.

Product Details

The AFG-2 is a slim line design that is shorter in overall length and width compared to the original AFG. Smaller size allows for mounting on a wider variety of railed hand guards and better compatibility with rail covers and accessory mounts. Compatible with most any M1913 Picatinny-railed hand guard, the Magpul AFG-2 (Angled Fore Grip) takes into account natural body mechanics and provides a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control.

 By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the AFG-2 helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots.

 Made in U.S.A.

Product Details

The Magpul M-LOK AFG (Angled Fore Grip) is the result of research and refinements done to the original AFG and AFG-2. By integrating the direct-attach M-LOK mounting system with minimalist construction we were able to produce a high strength grip that only weighs 1.2 ounces, including hardware. 

 Allowing for a wider range of mounting location options, the M-LOK AFG is ¾" shorter than the AFG-2 while maintaining a similar gripping surface area. Even though the M-LOK AFG is more compact than its predecessors it continues to take into account natural body mechanics to provide a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the M-LOK AFG helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.

 Made in U.S.A.

Product Details

The Magpul MOE AK Hand Guard is a replacement for standard AK pattern rifles without a front sling loop on the hand guard retainer. Featuring an extended gripping portion, integrated heat shield, M-LOK® mounting capability, and replacement gas tube cover, the MOE AK Hand Guard is an upgrade to any AK pattern rifle.

 Made in U.S.A. Hand Guard counts as one US compliance part for 922(r).

Product Details

The Enhanced Trigger Guard is a black anodized aluminum drop in replacement for the AR15/M4 weapons platform. It features a shallow "V" shape for better use of gloves in tactical shooting or cold weather operations. The Enhanced Trigger Guard is non-folding, has rounded edges, and fills the annoying "gap" at the rear of the standard trigger guard. All mounting hardware included.

 Made in U.S.A.

Product Details

Designed to considerably improve the speed and efficiency of the AR15/M16 bolt catch, the B.A.D. Lever quickly addresses reloading and malfunction clearance shortcomings of AR15/M16 platforms by extending a paddle to the right side of the weapon, allowing manipulation of the bolt stop from the fire control/ready position with the right-hand trigger finger.

Made from milspec-anodized aluminum, the B.A.D. Lever attaches to the standard AR15/M16 bolt release without permanent modification to the weapon. Functional for both left and right-handed shooters, the B.A.D. Lever also allows traditional bolt catch manipulation according to the AR15/M16 manual of arms. All mounting hardware included.

 Made in U.S.A.

Product Details

The Magpul AR Enhanced Magazine Release provides an enlarged contact surface for quick and fumble free magazine changes.

 With easy bolt-on installation with no gunsmithing required, the Enhanced AR Magazine Release is made of Mil-Spec hard anodized aluminum to provide durability and light weight.

Nordic Components, The M-LOK QD Sling Mount Provides a Forward Attachment Point For a Push-Button QD Sling, Machined From Milspec Anodized Aluminum, The Low-Profile M-LOK QD Sling Mount Features Beveled Edges to Reduce Snagging and Has an Anti-Rotation Design That Prevents Swivels From Spinning, All Hardware Necessary for Attachment Directly to M-LOK Slots is Included

TE AR15 Easy instal dust cover assembly

AR15 Forward assist assembly

AR15 Folding vertical grip with storage and switch mount

AR15 Bolt catch

AR15 Pivot/Takedown pin set

The Ambidextrous Magazine Release replicates the feel and length of a standard magazine release button but also accommodates left-handed shooters and one-handed magazine changes. This magazine release is constructed of rugged machined billet tool steel. Patent pending. Available in Black.

The Ambidextrous Bolt Release is an indispensable device that easily releases or holds bolt open with one hand to streamline firearm clearing and reloading after a malfunction. By being ambidextrous, this bolt release eliminates hand changeovers improving control of rifle when in use. Made from hardened aircraft aluminum. Available in Black.

The Troy Quick Attach Rail Sections secures with two screws to a backer on the inside of certain Troy Rails. For use on Alpha, Delta, TRX 308, TRX Extreme, Troy HK rails and T-22 Sport Chassis, M7 Uppers and M7 Kit, the Troy Quick Attach Rail sections accommodate a full range of accessories and installing them solidly onto the rail. Available in Black.

Parts Kit, AR15, Bolt Rehab

Our Gun builders kit includes most of the necessary parts to build up your lower group except the commonly upgraded parts. Does not include Trigger Guard, Fire Control Group, and pistol grip.

Gas Tube Kit, Rifle

Desgined for use with 22LR AR conversions. 25rd Capacity.

Super Dynamic Enhanced SD-E AR Trigger

The Geissele Super Dynamic-Enhanced (SD-E) Trigger featuring an exclusive flat trigger bow, is a finely-tuned two stage trigger providing enhanced trigger control and weapon accuracy while maintaining the robustness and reliability of our combat-proven two-stage trigger.

SUPER DYNAMIC 3 GUN (SD-3G) TRIGGER

The Geissele Super Dynamic 3 Gun (SD-3G) Trigger is based on the S3G Trigger. Like the S3G, the SD-3G has a shortened pull length and a lightning-quick reset to give it a unique, hybrid trigger pull that is a cross between a traditional two-stage and single-stage trigger while still retaining the safety and robustness of a two-stage combat trigger. The SD-3G’s flat trigger bow further enhances the trigger’s performance by reducing the perceived pull weight and improving the trigger’s tactile feedback to the operator making it ideally suited for 3 Gun competition shooting.

The Geissele Hi-Speed National Match Trigger Series is designed for NRA High Power Rifle competition with highly modified match-grade AR-15-type rifles.  The Service Rifle, Designated Marksman Rifle, and Match Rifle Spring sets are all included in this purchase.

The Super Charging Handle (SCH®) is 3D machined from a solid block of aircraft grade 7075-T6 aluminum. Its ambidextrous design allows for seamless operation from either side of the weapon.

SUPER CHARGING HANDLE (SCH®) 5.56

The Super Charging Handle (SCH®) is 3D machined from a solid block of aircraft grade 7075-T6 aluminum. Its ambidextrous design allows for seamless operation from either side of the weapon. The levers are dual contoured similar to that of the charging handle of an M14, where not only the x-axis but also the y-axis receive radius cuts. The handling surface of the lever is also checkered, adding a textured grip aiding to the use when operating with gloves. The heightened rear lip of the SCH aids in mitigating gas blow back to the shooter when shooting with short barreled and suppressed weapon systems. All parts are then Type 3 Hardcoat anodized and are available in black 

Mil-spec 6-position buffer tube manufactured from 7075 aluminum with black anodized finish.

Tube only; endplate and castle nut not included

JP .223 Enhanced Gas Rings

As a replacement for traditional three-piece gas rings, the JPEGR-223 utilizes a one-piece design similar to the McFarland rings. Unlike the McFarland rings, though, our precision-ground gas rings are engineered to precisely suit small-frame carrier group components such as our own JP EnhancedBolt™.

After testing numerous minute grind callouts, the final JP Enhanced Gas Rings spec is the perfect balance of a solid gas seal with a very low-friction relationship between rings and bolt carrier. Reducing the resistance between these components directly results in an overall increase in the rifle's operational window while the edge of the rings utilizes the cycling action itself to scrape the walls of the carrier, helping shed fouling with every shot.

JP Enhanced Reliability Spring Kit

This spring kit will yield a 3.5-4.0 lb. trigger pull with JP Fire Control parts. This kit is intended for use with JP trigger parts and will not necessarily yield substantial change on standard AR-15 trigger components. 

Application: Use of this spring kit allows for use of ammunition with low-sensitivity primers such as those found in NATO-spec and various foreign-manufactured ammunitions, but in the case of large-frame ARs and duty/defense rifles, domestic-manufactured ammo is strongly recommended to ensure 100% ignition reliability.

Product Details

The PMAG Minus 10 Round Limiter installs in 20 or 30 round GEN M3 PMAG bodies, reducing the magazine capacity by ten rounds. Designed for sporting and hunting applications, installation of the Limiter is simple, tool-less, and requires no permanent modification of the magazine body.

NOTE: Will NOT make a banned magazine legal! This product is intended for TEMPORARY capacity reduction of PMAG AR/M4 GEN M3 magazines. This product does not constitute a permanent capacity reduction. The user is responsible for knowing applicable laws in any jurisdiction that restricts magazines based on capacity or regulates magazine capacity for hunting. Please check all laws and regulations of your state and locality to determine the legality of your host ammunition magazines.

Made in U.S.A.