Select your country
Please select your country
Cart is empty
No items found matching the search criteria
Compensator specially designed for sports activities, it is ideal for long barrel carbines.
Ideal for sporting use, this has been made lighter than the standard A2 and it is therefore compatible with our lightweight carriers and spring A2.
The ADC lightweight spring for AR15/A2 fixed stock. Ideal for light weight carriers.
Lightweight spring for fixed stock. Ideal for sporting activities and for light weight carriers.
Support base with rail for sight, characterised by an adjustment wheel and two low tolerance sliding shafts that allow accurate calibration.
Increased pins, with external screws that ensure a precise alignment between trigger and hammer, avoiding deformation of the trigger.
Ambiu safety selector that offers the option of being installed at 90 degrees or 45 degrees. It has a central screw that allows safe adjustment, making it perfectly operational both assembled on the trigger kit ULTRA and on all other trigger group on the market.
This compensator and recoil reducer, with unusual and futuristic design, is designed to provide finest sports performance with steel case ammunition.
Ideal for sports activities, it is advisable to use it on long barrel carbines, both for close-range and long-distance shooting.
Compensator ideal for tactical use, whose maximum yield is with short barrel carbines.
The Competition handguard is 100% made CNC machined in Italy. It was designed specifically for sports activities; for this purpose it has been heavily lightened, front side rails are removed which optimizes its grip and allow the regulation ADC gas block from the outside.
Low-profile gas block for barrels with standard diameter of .750 “, featuring Clamp-on locking system with high resistance torx screws. It can be used with handguards with a minimum internal diameter of 35mm. Typically designed for sporting activity it has been lightened by side windows.
Bolt catch oversized both internally and externally. Visible prolonged internal flap that allows adaptability with all magazines. The knurled outer surface is great for improving its grip.
Mag release oversized, made up of two different pieces to ensure greater functionality while assembly phase. The knurled outer surface is great for improving its grip, as well as the elongated shape that makes the release easy even for those with small hands.
A recoil reducer designed to eliminate vibration and annoying noise that characterises the operation of AR platforms.
Springs kit for lightening trigger. Kit includes two different spring weights, one (red) ideal for tactical use, the other (white) for sporting activities, which allows the reduction of the trigger weight up to 1kg.
Increased and calibrated pins, specially designed to reduce coupling tolerances between Upper and Lower.
The Elite handguard is 100% made in Italy, CNC machined, it was designed primarily to maximize the particular design that features the ADC carbines, allowing compatibility with other AR platforms.
The Competition handguard is 100% made in Italy, CNC machined, it was designed specifically for sports activities; for this purpose it has been heavily lightened by making millings which optimize its grip and allow the regulation of our gas block ADJ. from the outside.
Round, free-float profile, it has double barrel nut, both inside and outside.
The holes positioned throughout its length allow mounting from outside the picatinny sections every 22.5 °.
Material: 6082 aluminum, hard black anodizing
Available lengths: 15,5”
Weight (without barrel nut): 208 gr
Width: 50 mm
Inside Diameter: 35mm
The M5 Plus handguard is 100% made in Italy, CNC machined, it was designed primarily to maximize the particular design that features the ADC carbines, allowing compatibility with other AR platforms. It is characterized by a free-float design an octagonal profile with full size picatinny. It uses the M-LOK system for attaching further accessories.
The ADC M5 upper assembley receiver for AR-15 comes with both the port door and forward assist hardware preinstalled.
Picatinny rail for ADC handguards.
The trigger kit “ULTRA”, all of our design, it is designed for top-level sport activities. Its modularity makes it functional also for precision shooting.
The ALG Defense Advanced Combat Trigger (ACT) is designed for those shooters where tradition, value and regulatory concerns are of primary importance. The pull of the ACT is very similar to a standard mil-spec trigger, however it is sharper and the grittiness of the stock trigger pull has been removed while the traditional reliability of a stock trigger remains. Pull Weight is about 6.0lbs.
Completely new design adds +5 rounds of capacity, featuring rough and rounded bottom, covered with Spider texture for solid position when shooting from floor or over an obstacle while using magazine as monopod support.
The two-part design of the BoreLock muzzle brake provides for secure, simple, and quick installation.
BT15: 3.35" 1913 Rail
The BT15 - 3.35" 1913 Rail will accommodate hole patterns with a center to center spacing of 1.76 – 2.78" and a relieved back to accommodate curved surfaces. A standard sling stud and sling stud spacer can be used as one fastener or two button head machine screws can be used. NO HARDWARE IS INCLUDED. See BT1517 to attach this rail to the forearm of standard rifle stocks. Available in black only.
BT12-QK: Standard Height Accu-Shot® Precision Rail Monopod
The BT12-QK is our standard height Precision Rail Monopod (PRM) with QK01 Quick Knob. Attaches to standard 1913 Picatinny rail. Available in black only.
Elevation Range: 3.75 – 4.65”
Folded Length: 3.85" approximate
Weight: 7.4 ounces
Bul Armory PCC Magwell for Bul Armory PCC rifle.
CMMG’s 9 AR Conversion makes it possible to shoot 9mm ammunition from your unmodified AR15 lower receiver when paired with a CMMG 9mm Radial Delayed Blowback upper.
Parts Kit, AR15, Bolt Rehab
Receiver Extension, A1
Rifle lenght gas tube kit.
Desgined for use with 22LR AR conversions. 25rd Capacity.
Ace's skeletonized stock for the AR-15 rifle. Closed cell foam overtube provides an extremely comfortable cheek weld. Uses A2 buffer tube, rifle length buffer and rifle length buffer spring (NOT INCLUDED). Foam overtube, buttpad and all needed mounting hardware included. Length 10" Weight 11.2oz
This stock uses Ace original soft foam overtube for the ultimate cheek weld. A billet machined gusset reinforces the receiver extension tube at its weakest point directly behind the receiver. Precision machined aluminum butt clamps directly to the RET and provides a machined in sling mount.
BUTTSTOCK, PISTOL GRIP(NTG), & M-LOK VERTICAL FOREGRIP COMBO - MIL SPEC +®
PISTOL GRIP
The new Daniel Defense pistol grip is an improvement to the old standby A2. We designed our grip with ergonomics and controllability in mind. Our grip shares the angle of the classic 1911 pistol for the most natural hand position and comfortable feel. This pistol grip incorporates an oversized trigger guard covering the gap between grip and lower receiver which can wear on the shooters hand and easily accommodates for gloves. Installation is simplified by the fact the integral trigger guard doesn’t require a roll pin so there is a reduced chance of damaging the lower receiver. A soft touch overmolding section enhances grip, wet or dry.
Eemann Tech Hammer Spring for AR-15. 10% less than original AR-15 hammer spring.
A truly ergonomic, shooter focused flat top grip for AR platform rifles and chassis systems. Designed for performance by creating a better interface between the shooter and firearm, the Ergo Grip is still the standard by which positive grip and shooter comfort are measured. The Ergo Grip comes with the patented Gapper™ for increased comfort. Very similar in size to the Original ERGO Grip
The Geissele Hi-Speed National Match Trigger Series is designed for NRA High Power Rifle competition with highly modified match-grade AR-15-type rifles. The Service Rifle, Designated Marksman Rifle, and Match Rifle Spring sets are all included in this purchase.
The Super Charging Handle (SCH®) is 3D machined from a solid block of aircraft grade 7075-T6 aluminum. Its ambidextrous design allows for seamless operation from either side of the weapon.
SUPER CHARGING HANDLE (SCH®) 5.56
The Super Charging Handle (SCH®) is 3D machined from a solid block of aircraft grade 7075-T6 aluminum. Its ambidextrous design allows for seamless operation from either side of the weapon. The levers are dual contoured similar to that of the charging handle of an M14, where not only the x-axis but also the y-axis receive radius cuts. The handling surface of the lever is also checkered, adding a textured grip aiding to the use when operating with gloves. The heightened rear lip of the SCH aids in mitigating gas blow back to the shooter when shooting with short barreled and suppressed weapon systems. All parts are then Type 3 Hardcoat anodized and are available in black
SUPER DYNAMIC 3 GUN (SD-3G) TRIGGER
The Geissele Super Dynamic 3 Gun (SD-3G) Trigger is based on the S3G Trigger. Like the S3G, the SD-3G has a shortened pull length and a lightning-quick reset to give it a unique, hybrid trigger pull that is a cross between a traditional two-stage and single-stage trigger while still retaining the safety and robustness of a two-stage combat trigger. The SD-3G’s flat trigger bow further enhances the trigger’s performance by reducing the perceived pull weight and improving the trigger’s tactile feedback to the operator making it ideally suited for 3 Gun competition shooting.
Super Dynamic Enhanced SD-E AR Trigger
The Geissele Super Dynamic-Enhanced (SD-E) Trigger featuring an exclusive flat trigger bow, is a finely-tuned two stage trigger providing enhanced trigger control and weapon accuracy while maintaining the robustness and reliability of our combat-proven two-stage trigger.
The SMR MK4 and MK8 were one of the first RIS sistems feature M-LOK technology. Available in multiple lenghts, with fore rails (MK4) or completly modular (MK8). Thez also feature Geissele's proprietary 2.25" long barrel nut. This increases the surface contact where the rail interfaces with the receiver and creates a platform that can be trusted to be straight and true the entire length of the free float rail. This increases accuracy and zero repeatability during disassembly and reassembly when performing maintenance.
Upper parts
Bolt small parts and recoil systems
Lower parts
Handguards, rails and mounts
Muzzle devices
Stocks and grips
Triggers and trigger parts
Gas blocks and tubes
Magazines and parts
