€ $
Tax settings
select country
Select brand
 
Brand
Reset

ADVANCED SEARCH

Price
Reset

SPECIAL OFFER

Subcategories

Browse by category

New
Firearms
Firearm parts
Gear
Reloading & ammunition
Maintenance
Optics & Sights
Demo / Used items
Sale

Bolt small parts and recoil systems

Sort Alphabetically: A to Z
24 Per Page
ADC A2 Competition Buffer
€40.16  

Ideal for sporting use, this has been made lighter than the standard A2 and it is therefore compatible with our lightweight carriers and spring A2.

In stock
+ −
ADC A2 Light Recoil Spring
€13.11  

The ADC lightweight spring for AR15/A2 fixed stock. Ideal for light weight carriers.

Out of stock
ADC A2 Spring and Buffer Kit
€49.18  

The package allows the variation from collapsible to fixed and includes tube, buffer, spring and screw.

In stock
+ −
ADC A2 Stock Spring
€12.30  

Lightweight spring for fixed stock. Ideal for sporting activities and for light weight carriers.

In stock
+ −
ADC AR15 Recoil Reducer
€135.25  

A recoil reducer designed to eliminate vibration and annoying noise that characterises the operation of AR platforms. 

Out of stock
ADC M4 Carbine Buffer Utež 92g
€27.87  
Out of stock
ADC M4 Carbine Standard Spring
€12.30  
Out of stock
AR15 Bolt gas rings (set of 3)
€7.38  
Out of stock
CMMG AR15 223rem Bolt Rehab Kit
€49.14  

Parts Kit, AR15, Bolt Rehab

In stock
+ −
CMMG Bolt Rehab Kit, 22AR Conversion
€40.94  
In stock
+ −
CMMG SPRING KIT, 22AR CONVERSION
€20.45  
In stock
+ −
EEMANN Tech AR-15 Bolt Gas Ring Kit - 3 pcs kit
€5.73  
In stock
+ −
EEMANN Tech AR-15 CAM PIN FOR AR-15
€16.31  
In stock
+ −
JP Enhanced Gas Ring .223
€15.57  

As a replacement for traditional three-piece gas rings, the JPEGR-223 utilizes a one-piece design similar to the McFarland rings. Unlike the McFarland rings, though, our precision-ground gas rings are engineered to precisely suit small-frame carrier group components such as our own JP EnhancedBolt™.

In stock
+ −
JP GEN 2 AR-15 Silent Captured Spring and parts
€16.39  

GEN 2 AR-15 Silent Captured Spring Builder with Alternative Spring Pack

Standard Version

Includes SCS unit, five alternative weight springs and spacer to allow for installation in both carbine- and rifle-length buffer tubes.

Compatibility

The JPSCS2-15 will not function with older Primary Weapon Systems (PWS) bolt carriers. The design of the carrier will prevent the rifle from cycling.

In stock
+ −
KYNTEC KynSHOT RB5000 Standard Damped AR15 .223 Hydraulic Buffer
€139.30  
The RB5000 KynSHOT Recoil Buffer is designed to fit AR-15 carbines with a collapsible stock. Made using 17-4 stainless steel, the KynSHOT RB5000 Recoil Buffer is a proven system that has seen heavy use with civilian competition shooters, law enforcement personnel and the United States Armed Forces.
Out of stock
KYNTEC KynSHOT RB5000HP AR15 Hydraulic Buffer (also for 9mm CMMG Conversion)
€139.30  
The KynSHOT RB5000HP Recoil Buffer is designed for over gassed AR-15 carbines or "Thumpers" like the .50 Beowulf or .458 SOCOM. The RB5000HP is also designed for CMMG's 9mm radial delayed blowback system.  Please contact us to verify your application. Made using 17-4 stainless steel, the RB5000HP KynSHOT Recoil Buffer AR-15 is a proven system that has seen heavy use with civilian competition shooters, law enforcement personnel and the United States Armed Forces. This buffer has patented damping technology to absorb the shock of impact from the bolt carrier’s rearward motion and to prevent bolt bounce as a new cartridge is chambered. The RB5000HP KynSHOT Recoil Buffer reduces felt recoil by 20-30%, while largely eliminating muzzle flip.The improvement in weapon accuracy – specifically second and third shot accuracy- is large as shooters report that their time to reacquire a target decreases, and in many cases never leaves their scope sights.
Out of stock
KYNTEC KynSHOT RB5000L AR15 300AAC Hydraulic Buffer
€139.30  
The KynSHOT RB5000L Hydraulic Recoil Buffer is optimized for use with light loads, including subsonic ammunition and .300 BLK. The RB5000L has seen heavy use with civilian competition shooters, law enforcement personnel, and the United Sates Armed Forces. This buffer has patented damping technology to absorb the shock of impact from the bolt carrier’s rearward motion and to prevent bolt bounce as a new cartridge is chambered. This model is made lighter and requires less force to cycle than the standard AR-15 KynSHOT Buffer. This is intended for soft cycling or under gassed guns that will not lock back on the last round with the standard carbine hydraulic buffer or heavier buffers. .300 BLK guns running exclusively supersonic ammo may be fine with a standard hydraulic buffer if the bolt cycles firmly and has proper ejection placement.
In stock
+ −
KYNTEC KynSHOT RB5004 ''Shorty'' AR10 Cal .308 Hydraulic Buffer
€139.30  
The KynSHOT RB5004 “Shorty” Recoil Buffer is designed for AR-10 carbines with a collapsible stock and an AR-15 length (7.0") buffer tube which is common on many AR-10 applications. The RB5004 reduces felt recoil 20-30%, while largely eliminating muzzle flip. The improvement in weapon accuracy – specifically second and third shot accuracy – is even more noticeable as shooters report that their time to reacquire a target decreases, and in many cases never leaves their scope sights. This buffer has patented damping technology to absorb the shock of impact from the bolt carrier's rearward motion and to prevent bolt bounce as a new cartridge is chambered.
In stock
+ −
KYNTEC Spacer Weight 70g/2,5oz
€16.35  
Our KynSHOT buffer weight, that was designed in cooperartion with Blitzkrieg Components, LLC., can be used with our PCC hydraulic buffers, and in certain cases, our AR hydraulic buffers to add mass in front of the buffer. The Spacer Weight also adds .75" in length to the buffer system, and adds 2.5 ounces of weight, which is designed for a close fit buffer tube while preventing tilting of the buffer during cycling. The weight has several functions: the additional mass further delays initial bolt movement and slows the bolt velocity, it helps to keep the buffer aligned in the buffer tube, and its additional length can be used to make a short stroke system if desired.
Out of stock
Magpul AR15/M4 Carbine Buffer H - H3
€69.63  
This Mil-Spec construction AR15 / M4 H3 Carbine Buffer is for use in AR15 / M4 carbine-type receiver extensions. It is constructed out of aluminum and contains three tungsten weights.
In stock
+ −
ODIN Adjustable Buffer AR15 Heavy
€61.48  
ODIN Works is always looking for new ways to make your build as customizable as possible to fit you, the shooter. This adjustable buffer does just that. Available to fit AR-15 platforms, each buffer also comes with multiple weights to customize the weight combination for your personal build.
In stock
+ −
S&W M&P15-22 Ejector
€27.01  
Smith & Wesson M&P15-22 Ejector. This ejector is manufactured for the Smith & Wesson M&P15-22 blowback-operated rifles chambered in .22 LR. This ejector is made from durable black steel and is responsible for ejecting spent casings from the firearm. This part is perfect as a spare on the workbench or as an immediate replacement for a lost or damaged piece.
In stock
+ −
S&W M&P15-22 Extractor
€20.49  
Smith & Wesson M&P15-22 Extractor. This extractor is manufactured for the Smith & Wesson M&P15-22 blowback-operated rifles chambered in .22 LR. The extractor is installed onto the bolt assembly and is responsible for extracting spent ammunition. Machined from steel and featuring a black finish, this component is perfect as a spare on the workbench or as an immediate replacement for a lost or damaged piece.
In stock
+ −
1 2