€ $
Tax settings
select country
Select brand
 
Brand
Reset

ADVANCED SEARCH

Color
Price
Size
Reset

SPECIAL OFFER

Subcategories

Browse by category

New
Firearms
Firearm parts
Gear
Reloading & ammunition
Maintenance
Optics & Sights
Demo / Used items
Sale
Upper parts
Bolt small parts and recoil systems
Lower parts
Handguards, rails and mounts
Muzzle devices
Stocks and grips
Triggers and trigger parts
Gas blocks and tubes
Magazines and parts

AR15 and other rifle parts

Newest Items First
12 Per Page
Magpul AR15/M4 Carbine Buffer H - H3
€69.63  
This Mil-Spec construction AR15 / M4 H3 Carbine Buffer is for use in AR15 / M4 carbine-type receiver extensions. It is constructed out of aluminum and contains three tungsten weights.
In stock
+ −
Magpul Enhanced Receiver Extension SR25/M110 - 10 Position
€98.32  

The Magpul Enhanced Receiver Extension is a 10-position, Mil-Spec sized, SR25 / M110 profile buffer tube optimized to fit with the full line of Magpul Mil-Spec Carbine Stocks.

Due to its longer length, this receiver extension is compatible with most DPMS® Gen 1 pattern 7.62x51 firearms with standard length AR15 / M4 carbine buffer components as well as aftermarket A5 buffers and springs for use on 5.56x45 AR15 / M4 platforms.*

Constructed of impact extruded 7075-T6 aluminum with Type III, Class 2 hard coat anodizing for an extremely hard, abrasion resistant surface. The interior of the receiver extension features Everlube® coating for enhanced corrosion resistance and reduced friction and wear. The additional position holes allow for more length-of-pull fitment options.

Out of stock
Magpul Enhanced Receiver Extension AR15/M4 - 7 Position
€81.93  

The Magpul Enhanced Receiver Extension is a 7-position, Mil-Spec sized, AR15 / M4 profile buffer tube optimized to fit with the full line of Magpul Mil-Spec Carbine Stocks.

Constructed of impact-extruded 7075-T6 aluminum with Type III, Class 2 hard coat anodizing for an extremely hard, abrasion resistant surface. The interior of the receiver extension features Everlube® coating for enhanced corrosion resistance and reduced friction and wear. The additional position holes allow for more length-of-pull fitment options while retaining a standard length for the tube.

Out of stock
Magpul AFG - Angled Fore Grip
€39.30  
Compatible with most any M1913 Picatinny-railed hand guard, the Magpul AFG (Angled Fore Grip) takes into account natural body mechanics and provides a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the AFG helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots.
In stock
+ −
ODIN XMR 3 Extended Magazine Release
€24.55  
Inspired by the ODIN Works O2 Lite, the XMR3 is the latest mag release available from ODIN Works. Machined from billet 6061 aluminum and designed to work with KNS pins and the BAD lever. The XMR3 has the largest profile yet, making it easily accessible by all shapes and sizes of hands and fingers. Works with both AR15 and some AR10 lower receivers. For Aero M5 Lowers purchase the AR10 Add on button.
Out of stock
ODIN AR15 O2 LITE Handguard 9.5'' | 12.5'' | 15.5''
€196.68  
The O2 Lite is the latest and lightest of all the ODIN Works Forends. Precision machined from 6005-T651, the O2 Lite is a full 20% lighter than its predecessors. All ODIN Works Forends are free floating for accuracy and hard anodized for durability.
In stock
+ −
ODIN AR15 Zulu 2.0 Adjustable Stock Kit
€163.89  
The ZULU 2.0 stock combined with the ODIN Works padded intermediate buffer tube creates a complete stock suitable for rifle or carbine builds. Machined from 6061 aluminum with ergonomics and function in mind, the ZULU2.0 stock gives you an ambidextrous and adjustable solution for your rifle. With the reversible QD adapter included, this stock allows you to set it to your needs.
Out of stock
SPRINCO AR Buffer Spring RED
€22.91  
Extra Power Buffer Spring. This was our first AR buffer spring solution that we were tasked to design back in 2006 for a Force Modernization Team to specifically address spring-related M4 carbine reliability function issues for operating challenges in the Eastern Asia Theatre. The design loads of the Red spring are approximately 25% greater than the White spring for one of the considered Load Constants in the spring design. Refer to provided tuning procedure reference documents prior to calling for recommendations for use. The Red spring is commonly used in 9mm, 6.8 SPC, 6.5 Grendel, .450 BM, .450 SOCOM, .500 Beowulf, and Colt LE6920’s specimen carbines, but certain specimen guns can deviate from the norm depending upon port values and the power factor of your chosen ammunition loads. Color Coded RED.
Out of stock
SPRINCO AR Buffer Spring BLUE
€22.91  
Enhanced Power Buffer Spring. The design loads of the Blue spring are approximately 15% greater than the White spring for one of the considered Load Constants in the spring design. Refer to provided tuning procedure reference documents prior to calling for recommendations. While contemporary internet forum lore leans towards the use of the Blue spring with an H2 or ST-T2 buffer for 14.5 - 16” ML carbines, nothing is set in stone due to the vast range of gas port values in the wild that have come into play since we first entered the arena. Color Coded BLUE.
Out of stock
SPRINCO AR Buffer Spring YELLOW
€22.91  
Reduced Power Buffer Spring. We collaborated with two prominent commercial ammunition manufacturers and two prominent gunsmiths to arrive at the design for the Yellow spring. It’s approximately 20% lighter than the White spring, and was the consensus choice out of 4 different evaluation samples provided to all parties. They all added in their final evaluations that if a particular gun needed a lighter spring, that the gas port should be enlarged for overall reliability. The Yellow spring is also appropriate for with low power SRTA training or SIMS Rounds for training operations. Color coded YELLOW.
Out of stock
SPRINCO AR Buffer Spring ORANGE
€22.91  
Extra Extra Power Buffer Spring. The Orange spring is much stouter than the Red spring. The Orange buffer spring was originally engineered for the demands presented by.308 / 6.5 CM / .260 Rem, etc., heavy BCG carbine DPMS Pattern applications using standard 7" Depth M4 extension tubes and short 2.5" buffers (Including aftermarket "heavy buffers") in robustly gassed 16” - 18” ML gas carbine platforms, but has been proven to be a requirement for tuning over gassed carbines of any equivalent heavy calibers in AR-10 pattern tubes with 3.25" buffers or lesser calibers (5.56, etc.). Color Coded ORANGE.
In stock
+ −
S&W M&P15-22 Ejector
€27.01  
Smith & Wesson M&P15-22 Ejector. This ejector is manufactured for the Smith & Wesson M&P15-22 blowback-operated rifles chambered in .22 LR. This ejector is made from durable black steel and is responsible for ejecting spent casings from the firearm. This part is perfect as a spare on the workbench or as an immediate replacement for a lost or damaged piece.
In stock
+ −
1 2 3 4 5 6 7 8
3 - 17