AR15 and other rifle parts

 HIPERFIRE PDI Trigger

As a replacement for traditional three-piece gas rings, the JPEGR-223 utilizes a one-piece design similar to the McFarland rings. Unlike the McFarland rings, though, our precision-ground gas rings are engineered to precisely suit small-frame carrier group components such as our own JP EnhancedBolt™.

JP Enhanced Reliability Spring Kit

This spring kit will yield a 3.5-4.0 lb. trigger pull with JP Fire Control parts. This kit is intended for use with JP trigger parts and will not necessarily yield substantial change on standard AR-15 trigger components. 

Application: Use of this spring kit allows for use of ammunition with low-sensitivity primers such as those found in NATO-spec and various foreign-manufactured ammunitions, but in the case of large-frame ARs and duty/defense rifles, domestic-manufactured ammo is strongly recommended to ensure 100% ignition reliability.

GEN 2 AR-15 Silent Captured Spring Builder with Alternative Spring Pack

Standard Version

Includes SCS unit, five alternative weight springs and spacer to allow for installation in both carbine- and rifle-length buffer tubes.

Compatibility

The JPSCS2-15 will not function with older Primary Weapon Systems (PWS) bolt carriers. The design of the carrier will prevent the rifle from cycling.

Recoil Eliminators

Whether you're an practical rifle competitor, a varmint hunter, a member of a special military or police tactical team or just a plinker, sight recovery is the name of the game. Lower the recoil and you reduce muzzle flip, which leads to faster sight recovery and faster follow-up shots. Every compensator operates on this principle, but none can match the classic JP Recoil Eliminator. This design has been with us almost as long as JP has been in business. "Radical performance" was the goal then--it was the 90s, remember--and that still holds today with the Recoil Eliminator still providing the fastest possible sight recovery and the highest level of recoil reduction of any device on the market, including our own line of compensators.

Functional above all else, the brake's broad baffle surfaces redirect the vast majority of muzzle gases out to the sides with each shot. This actually drives the rifle forward during fire, counteracting the rearward recoil impulse for both minimized overall movement and muzzle flip coupled with reduced fatigue from constant fire, particularly with large-bore rifles. The JPRE also shapes these gases so as to spare the shooter from any concussion as well as the annoyance of thrown dust when shooting off a bipod.

A better shooting experience in every way; that's what the Recoil Eliminator delivers. Over two decades of reviews and match wins tell the tale.

Knights Armament Company, Top Rail Rubber Thumb Rest, Fits Picatinny, Black Finish

Mil-spec 6-position buffer tube manufactured from 7075 aluminum with black anodized finish.

Tube only; endplate and castle nut not included

Nordic Components, Purpose-Designed for Mounting Accessories at the 11 O’clock or 1 O’clock Positions On the NCT3 Handguard, This Rail Has Additional Height to Allow Clearance From the Integral Top Rail, Designed For Use with All M-LOK Compatible Handguards, M-LOK Aluminum Rail Sections Allow the Attachment of Various 1913 Picatinny-Spec Rail-Mounted Accessories. Machined From Milspec-Anodized Aluminum, M-LOK Rail Sections Feature Beveled Ends to Reduce Snagging and Eliminate Sharp Corners

The AFG-2 (Angled Fore Grip) is a slim line design that is shorter in overall length and width compared to the original AFG. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the AFG-2 helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots.

The Heat-Treated Castle Nut screws onto the AR15/M4 lower receiver extension (buffer tube) and keeps the receiver extension and lower receiver end plate secured in place.  The large notches allow for positive engagement with a castle nut wrench for proper installation and torque.  The smaller notches provide a location for the end user to stake the castle nut to prevent accidental loosening.

Finished in a Mil-spec manganese phosphate.

Product Details

Designed to considerably improve the speed and efficiency of the AR15/M16 bolt catch, the B.A.D. Lever quickly addresses reloading and malfunction clearance shortcomings of AR15/M16 platforms by extending a paddle to the right side of the weapon, allowing manipulation of the bolt stop from the fire control/ready position with the right-hand trigger finger.

Made from milspec-anodized aluminum, the B.A.D. Lever attaches to the standard AR15/M16 bolt release without permanent modification to the weapon. Functional for both left and right-handed shooters, the B.A.D. Lever also allows traditional bolt catch manipulation according to the AR15/M16 manual of arms. All mounting hardware included.

 Made in U.S.A.

The Magpul CTR (Compact/Type Restricted) model is a drop-in replacement buttstock for AR15 / M16 carbines, and comes in Mil-Spec and Commercial-Spec variants. Designed for light, fast action, the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation.

The Magpul AR Enhanced Magazine Release provides an enlarged contact surface for quick and fumble-free magazine changes. With easy bolt-on installation and no gunsmithing required, the Enhanced AR Magazine Release is made of Mil-Spec hard anodized aluminum to provide durability and light weight.

The Magpul Enhanced Receiver Extension is a 7-position, Mil-Spec sized, AR15 / M4 profile buffer tube optimized to fit with the full line of Magpul Mil-Spec Carbine Stocks.

Constructed of impact-extruded 7075-T6 aluminum with Type III, Class 2 hard coat anodizing for an extremely hard, abrasion resistant surface. The interior of the receiver extension features Everlube® coating for enhanced corrosion resistance and reduced friction and wear. The additional position holes allow for more length-of-pull fitment options while retaining a standard length for the tube.

The Magpul Enhanced Receiver Extension is a 10-position, Mil-Spec sized, SR25 / M110 profile buffer tube optimized to fit with the full line of Magpul Mil-Spec Carbine Stocks.

Due to its longer length, this receiver extension is compatible with most DPMS® Gen 1 pattern 7.62x51 firearms with standard length AR15 / M4 carbine buffer components as well as aftermarket A5 buffers and springs for use on 5.56x45 AR15 / M4 platforms.*

Constructed of impact extruded 7075-T6 aluminum with Type III, Class 2 hard coat anodizing for an extremely hard, abrasion resistant surface. The interior of the receiver extension features Everlube® coating for enhanced corrosion resistance and reduced friction and wear. The additional position holes allow for more length-of-pull fitment options.

The Magpul® Enhanced Rubber Butt-Pad, 0.70" is an optional replacement butt pad for the CTR® and MOE® Carbine Mil-Spec stocks as well as the original UBR®, all STR®, ACS-L™ and ACS™ stocks.

The Enhanced Trigger Guard is a non-folding black anodized aluminum drop in replacement for the AR15/M4 weapons platform. It features a shallow "V" shape for better use of gloves in tactical shooting or cold weather operations.

The Magpul M-LOK AFG (Angled Fore Grip) is the result of research and refinements done to the original AFG and AFG-2. By integrating the direct-attach M-LOK mounting system with minimalist construction, we were able to produce a high strength grip that only weighs 1.2 ounces, including hardware.

The Magpul M-LOK Bipod Mount allows for the attachment of most Harris®-style stud mounted bipods to M-LOK compatible hand guards and forends. The M-LOK Bipod Mount offers a low-profile, robust, and elegant mounting solution for the most common bipods on the market.  By utilizing the direct-connect properties of the M-LOK system, the bipod sits closer to the mounting surface than other adapters while providing superior support to the bipod for strength and stability.

Designed for use with all M-LOK compatible hand guards and forends, our 11-slot M-LOK Polymer Rail Sections provide a cost effective method of attaching various 1913 Picatinny-Spec rail-mounted accessories such as lights, vertical grips, etc. Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight, our M-LOK Polymer Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges.

Magpul M-LOK QD Sling Mount provides a forward attachment point for the Magpul MS4 Sling and other push-button QD slings. 

The M-LOK T-Nut Replacement Set is a replacement hardware pack designed for use with all M-LOK accessories. Made of 4140 Chromoly Steel with a Mil-Spec Manganese Phosphate finish, the hardware set is supplied with two T-Nuts as well as two different length button-head cap screws to ensure compatibility with various hand guard or forend thicknesses.

The MIAD (Mission Adaptable) GEN 1.1 Grip is a drop-in replacement for the standard AR15 / AR10 grip, now available in two dedicated configurations to fit most receivers. It is designed to improve ergonomics with interchangeable front and rear straps for personalized hand fit, an aggressive texture for positive weapon control, and is compatible with all Magpul grip cores to adapt to various storage needs.

Product Details

The PMAG Minus 10 Round Limiter installs in 20 or 30 round GEN M3 PMAG bodies, reducing the magazine capacity by ten rounds. Designed for sporting and hunting applications, installation of the Limiter is simple, tool-less, and requires no permanent modification of the magazine body.

NOTE: Will NOT make a banned magazine legal! This product is intended for TEMPORARY capacity reduction of PMAG AR/M4 GEN M3 magazines. This product does not constitute a permanent capacity reduction. The user is responsible for knowing applicable laws in any jurisdiction that restricts magazines based on capacity or regulates magazine capacity for hunting. Please check all laws and regulations of your state and locality to determine the legality of your host ammunition magazines.

Made in U.S.A.

Product Details

The M-LOK MVG is a light weight, inexpensive vertical foregrip that attaches directly to M-LOK compatible hand guards and forends with no additional Picatinny rails required. Made from the same high quality polymer as other Magpul products, the M-LOK MVG uses the new Magpul TSP texture for positive control in all environments. 

 With rounded contours and a shorter length, it has been optimized for use with the "thumb break method" of shooting and can also be used as a traditional vertical foregrip. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.

 Made in U.S.A.

Product Details

The MOE Grip (Magpul Original Equipment) is a drop-in upgrade for the standard AR15/M4 pistol grip. The ergonomic, hand filling design combines anti-slip texturing with storage core capability. With a similar shape to a 'medium' sized MIAD, the one-piece reinforced polymer construction provides simplicity and a reduced cost while still maintaining the durability needed to withstand operational environments. The MOE Grip accepts optional Storage Cores for gear stowage and includes a basic grip cap. All mounting hardware included.

 Made in U.S.A.

Kopito za puške MOE (Magpul Original Equipment) je nadomestek za puške AR15/M16 A1 in A2, ki uporablja Rifle lenght dolžino buffer tube. Zasnovano kot osnovna nadgradnja ima vgrajeno 1,25-palčno zanko za nosilni jermen, dvostranske sprednje in zadnje pritrdilne točke QD, zamenljivo protizdrsno gumirano podlogo in notranji predal za shranjevanje, dostopen skozi zadnjo stran kopita.