Select your country here
Please select your country
Il carrello è vuoto
Nessun elemento trovato che soddisfa i criteri di ricerca
Pimp your AR !!! Toni System is the adress to look for functionality, quality and design.
To pesonalize your AR you can choose different colors
To enhance and speed up the handling of your AR, look no further, TONI System has the right parts.
The Elite handguard is 100% made in Italy, CNC machined, it was designed primarily to maximize the particular design that features the ADC carbines, allowing compatibility with other AR platforms.
It is characterized by an octagonal profile, free-float, with four frontal picatinny.
It is distinguished by other models for futuristic design and for the upper interrupted picatinny.
It is important to emphasize the use of the modern M-LOK system.
Material: 6082 aluminum, hard black anodizing
Available lengths: 9” – 12” – 14” – 15,5”
Weight (without barrel nut): 224 gr – 248 gr – 272 gr – 288 gr
Width: 41mm
Inside Diameter: 35mm
The Competition handguard is 100% made in Italy, CNC machined, it was designed specifically for sports activities; for this purpose it has been heavily lightened by making millings which optimize its grip and allow the regulation of our gas block ADJ. from the outside.
Round, free-float profile, it has double barrel nut, both inside and outside.
The holes positioned throughout its length allow mounting from outside the picatinny sections every 22.5 °.
Available lengths: 15,5”
Weight (without barrel nut): 208 gr
Width: 50 mm
The Competition handguard is 100% made in Italy, CNC machined, it was designed specifically for sports activities; for this purpose it has been heavily lightened by making millings which optimize its grip and allow the regulation of our gas block ADJ, from the outside.
M-Lok, Free-float profile, it has double barrel nut, both inside and outside.
The holes positioned throughout its length allow mounting from outside the picatinny sections
Available lengths: 15”
Weight (without barrel nut): 240 gr
Spectrum
Compensator ideal for tactical use, whose maximum yield is with short barrel carbines.
The side windows, specially tapered to dampen the recoil and at the same time break the flame. The upper holes, on the other hand, give the weapon stability and neutrality, minimizing the nose-up and reducing the twist. Lastly, the four frontal tips allow this compensator to be used as a means of breaking.
It is made of high quality steel and subjected to high-hardness heat treatments with the double end to make the non-stick surface to the gunpowder residues on one side and robust on the other.
Thread 1/2×28
Ideal for sports activities, it is advisable to use it on long barrel carbines, both for close-range and long-distance shooting.
This compensator and recoil reducer, with unusual and futuristic design, is designed to provide finest sports performance with steel case ammunition.
It is made of high quality steel and subjected to heat treatments in order to make the non-stick surface to gunpowder residues.
The square side windows have been specially designed to dampen the recoil, the holes give stability and neutrality to the weapon, minimizing the nose-up. Lastly, the four front propellers, staggered by each other, allow the contrast of the grooves of the barrel, decreasing the twist.
Compensator specially designed for sports activities, it is ideal for long barrel carbines.
Its side windows give stability and neutrality to the weapon, minimizing the nose-up and getting back on target cracking followup shots as fast as possible.
The special radial holes located at the base of each window have been specially designed to dampen the recoil.
Functional for both close and long range shooting.
The elongated shape combined with the windows gives a distinguishable and refined image.
Ace's skeletonized stock for the AR-15 rifle. Closed cell foam overtube provides an extremely comfortable cheek weld. Uses A2 buffer tube, rifle length buffer and rifle length buffer spring (NOT INCLUDED). Foam overtube, buttpad and all needed mounting hardware included. Length 10" Weight 11.2oz
Note: Comes only with ARFX Stock and Foam Overtube. Does not include A2 Extension Tube, Rifle Buffer, Or Rifle Buffer Spring.
This stock uses Ace?s original soft foam overtube for the ultimate cheek weld. A billet machined gusset reinforces the receiver extension tube at its weakest point directly behind the receiver. Precision machined aluminum butt clamps directly to the RET and provides a machined in sling mount.
Seekins Precision, Safety Selector Kit, Red Finish
90 degree standard throw lever
60 degree short throw lever
Available in black or color anodize
Drop in replacement for Mil-Spec selector switch
Fully ambidextrous
Compatible with Ruger Precision Rifle
he Seekins Precision DNA Charging Handle offers a full body and textured grip surface to improve user controls. Our team set out to create a product that would not only offer ergonomic fit and function, but also aesthetic design. Crafted in a climate controlled laboratory by a team of scientists who were only allowed to use their right hands, we can proudly say the DNA handle is the most non-ambidextrous charging handle in our product line up. Really, it's just a charging handle, a very non-ambidextrous one. Enjoy!
A truly ergonomic, shooter focused flat top grip for AR platform rifles and chassis systems. Designed for performance by creating a better interface between the shooter and firearm, the Ergo Grip is still the standard by which positive grip and shooter comfort are measured. The Ergo Grip comes with the patented Gapper™ for increased comfort. Very similar in size to the Original ERGO Grip
Knights Armament Company, Top Rail Rubber Thumb Rest, Fits Picatinny, Black Finish
BUTTSTOCK, PISTOL GRIP(NTG), & M-LOK VERTICAL FOREGRIP COMBO - MIL SPEC +®
The Daniel Defense adjustable buttstock is constructed of a proprietary blend of glass infused polymers and finished off with soft touch rubber overmolding in strategic points. The new buttstock is precision formed for mil-spec receiver extensions to have very little forward or lateral play that is so common in many other buttstocks. This eliminates the need for a tensioning device or friction lock. All of this results in a durable buttstock that will give the shooter a comfortable and repeatable cheek weld and unprecedented control of the firearm. The buttstock can be run with one of two included buttpads or without any buttpad at all to custom fit the rifle to whatever gear the operator must wear. The buttpads come in two sizes: a thicker convex shape (0.8”), and a thinner concave shape (0.5”); designed to keep from snagging when shouldering the rifle. Limited rotation QD swivel attachment points are integrated on both sides of the buttstock for ambidextrous sling connection.
PISTOL GRIP
The new Daniel Defense pistol grip is an improvement to the old standby A2. We designed our grip with ergonomics and controllability in mind. Our grip shares the angle of the classic 1911 pistol for the most natural hand position and comfortable feel. This pistol grip incorporates an oversized trigger guard covering the gap between grip and lower receiver which can wear on the shooters hand and easily accommodates for gloves. Installation is simplified by the fact the integral trigger guard doesn’t require a roll pin so there is a reduced chance of damaging the lower receiver. A soft touch overmolding section enhances grip, wet or dry.
Parti superiori
Bolts and recoil parts
Parti inferiori
Paramano e rotaie
Dispositivi per avancarica
Fusti e maniglie
Parti del grilletto
Blocchi e tubi di gas
Caricatore e parti
