Select your country here
Please select your country
Корзина пуста
По этим критериям поиска ничего не найдено
Ace's skeletonized stock for the AR-15 rifle. Closed cell foam overtube provides an extremely comfortable cheek weld. Uses A2 buffer tube, rifle length buffer and rifle length buffer spring (NOT INCLUDED). Foam overtube, buttpad and all needed mounting hardware included. Length 10" Weight 11.2oz
Note: Comes only with ARFX Stock and Foam Overtube. Does not include A2 Extension Tube, Rifle Buffer, Or Rifle Buffer Spring.
Current Handgun pistol grips were carefully considered and reviewed to create a modern full-sized AR pistol grip that offer positive support and control for one handed operations. The finger swell and grooved back straps provide a positive grip surface with wet or gloved hands
? Increases operator comfort and weapon performance, providing more control during reloading and firing? Tab covers the receiver gaps that cause discomfort during sustained usage and can be easily removed if desired? Designed for M16/M4/AR15/HK41? Full Size Pistol Grip? Optimal for one handed operation
Weight: 2.5oz
Height: 1.2"
Width: 1.341"
Length: 2.543"
MBX "Fang" CTR & Hogue Stock Extensions
For installation on the Magpul model CTR, this extends the factory Butt Stock to allow for deeper and more stable contact with the shoulder pocket allowing for greater recoil control and added stability when reloading along with a raise stance when used in conjunction with the MBX off set mount.
Product Details
The Magpul CTR (Compact/Type Restricted) – Mil-Spec Model is a drop-in replacement buttstock for AR15/M16 carbines using mil-spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation.
The CTR also features a supplemental friction lock system that minimizes excessive stock movement for enhanced weapon stability* and an ambidextrous QD sling mount that will accept any push-button sling swivel. The Mil-Spec Model includes a standard 0.30" thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.
Made in U.S.A.
The Magpul M-LOK AFG (Angled Fore Grip) is the result of research and refinements done to the original AFG and AFG-2. By integrating the direct-attach M-LOK mounting system with minimalist construction we were able to produce a high strength grip that only weighs 1.2 ounces, including hardware.
Allowing for a wider range of mounting location options, the M-LOK AFG is ¾" shorter than the AFG-2 while maintaining a similar gripping surface area. Even though the M-LOK AFG is more compact than its predecessors it continues to take into account natural body mechanics to provide a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the M-LOK AFG helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.
The UBR GEN2 is an adjustable stock for AR15/M4 and AR10/SR25 platforms, designed to offer similar strength and stability as a fixed stock with a consistent and comfortable cheek weld in any position.
An update of the revolutionary Utility/Battle Rifle (UBR) stock, the UBR GEN2 features a fixed cheek piece to provide a consistent cheek weld in any of its eight positions, and is compatible with Carbine as well as A5 and SR-25 length buffer systems. Designed to accommodate large bore AR calibers and withstand severe impacts, the UBR GEN2 is nearly five ounces lighter while retaining all the durability its predecessor was legendary for. Comes standard with front and rear QD sling attachment points, two footman’s loops, the ergonomic MOE SL™ angled-toe rubber butt-pad, and customizable storage compartment.
The PRS GEN3 is a field precision stock for AR15/M16 and AR10/SR25 platforms, featuring tool-less length of pull and cheek piece height adjustment.
With solid adjustments for length of pull and cheek piece height via aluminum detent knobs, the PRS GEN3 (Precision Rifle/Sniper) stock provides a stable interface and is intended for semi-automatic sniper or varmint type rifles. Offering a nearly universal fit, it is optimized for rifle-length receiver extensions but will also mount to many mil-spec carbine and A5-length tubes*. Includes a cant/height-adjustable rubber butt-pad and rotation-limiting QD sling swivel cups as well as M-LOK® slots on the bottom for rear monopod mounting.
The four-piece XTM Hand Stop Kit serves as a lightweight, low-profile rail mounted index point for improved weapon control, or as a forward stop to prevent the shooter's hand from reaching the hot front sight assembly or muzzle. The kit includes one Hand Stop, one Index Panel, one full XTM Enhanced Panel, and one XTM Enhanced Half Panel.
The AFG-2 is a slim line design that is shorter in overall length and width compared to the original AFG. Smaller size allows for mounting on a wider variety of railed hand guards and better compatibility with rail covers and accessory mounts. Compatible with most any M1913 Picatinny-railed hand guard, the Magpul AFG-2 (Angled Fore Grip) takes into account natural body mechanics and provides a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control.
By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the AFG-2 helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots.
Mil-spec 6-position buffer tube manufactured from 7075 aluminum with black anodized finish.
Tube only; endplate and castle nut not included
This stock uses Ace?s original soft foam overtube for the ultimate cheek weld. A billet machined gusset reinforces the receiver extension tube at its weakest point directly behind the receiver. Precision machined aluminum butt clamps directly to the RET and provides a machined in sling mount.
The Magpul® Enhanced Rubber Butt-Pad, 0.70" is an optional replacement butt pad for the CTR® and MOE® Mil-Spec stocks as well as the original UBR®, all STR®, ACS-L™ and ACS™ stocks.
It is designed for enhanced shoulder purchase as well as offering slightly improved recoil reduction with its thicker, vented construction. The Enhanced Rubber Butt-Pad can also be installed on Commercial-Spec MOE®/CTR® stocks, but may prohibit use of fully collapsed position due the extended, slanted back of most commercial-spec receiver extensions.
All mounting hardware included.
