Select your country here
Please select your country
Корзина пуста
По этим критериям поиска ничего не найдено
For Shadow 2 and Tactical sport need to be fitted
Kit consisting of
Floating trigger pin, Barrel bushing SP-01, Ultra lite set, Race hammer kit, Sear spacer, Trigger return spring, Hammer pin, Shadow 2 only disconnector.
Ace's skeletonized stock for the AR-15 rifle. Closed cell foam overtube provides an extremely comfortable cheek weld. Uses A2 buffer tube, rifle length buffer and rifle length buffer spring (NOT INCLUDED). Foam overtube, buttpad and all needed mounting hardware included. Length 10" Weight 11.2oz
Note: Comes only with ARFX Stock and Foam Overtube. Does not include A2 Extension Tube, Rifle Buffer, Or Rifle Buffer Spring.
This stock uses Ace?s original soft foam overtube for the ultimate cheek weld. A billet machined gusset reinforces the receiver extension tube at its weakest point directly behind the receiver. Precision machined aluminum butt clamps directly to the RET and provides a machined in sling mount.
Seekins Precision, Safety Selector Kit, Red Finish
90 degree standard throw lever
60 degree short throw lever
Available in black or color anodize
Drop in replacement for Mil-Spec selector switch
Fully ambidextrous
Compatible with Ruger Precision Rifle
he Seekins Precision DNA Charging Handle offers a full body and textured grip surface to improve user controls. Our team set out to create a product that would not only offer ergonomic fit and function, but also aesthetic design. Crafted in a climate controlled laboratory by a team of scientists who were only allowed to use their right hands, we can proudly say the DNA handle is the most non-ambidextrous charging handle in our product line up. Really, it's just a charging handle, a very non-ambidextrous one. Enjoy!
Straight single action aluminum trigger with pre-and over-travel adjustment. All Cajun Gun Works supplied triggers include a 1.5mm allen wrench for your convenience. This trigger is now a Cajun Gun Works product proudly “Made in the USA”!
TECH TIP: This is a “conversion” trigger and completely disables the double action feature. When installing this trigger you will need our TR-PIN as a replacement for the throw away CZ OEM trigger pin, and our SP starter punch for removing the CZ OEM trigger pin. Remove the disconnector when installing this trigger. This trigger cannot be used in any CZ decocker.
Full width direct replacement Race hammer and CGW’s exclusive adjustable billet sear. Produces a competition grade single action pull under 3#’s; not recommended for self defense use. Will require the use of the CGW S-spacer which is included in the kit.
barrel bushing for the “standard barrel” 9mm manual safety and decocker pistols. Fits: 75B in 9mm (will not fit the 75B .40, see our 7510X), P-01, PCR, 75B Compact, 85C and 85B. Made from 4140 and heat treated to RC45. Reduces barrel muzzle play to -0- at lock-up. This is a direct replacement for the OEM bushing. Fits .504” OD CZ’s. USPSA Production Approved.
NOTE: Some minor fitting may be required typically at the #46 retaining pin groove.
IDPA Production Legal upgrade kit for the manual safety CZ 75 models. Fits all “classic” lock work manual safety 75 and 40B, including SP-01. Everything you need excluding tools. Our starter punch, part number SP is highly recommended. Absolutely No Substitutions.
IDPA production legal, full upgrade kit. Includes everything for a 100% compliant competition ready drop-in package for all manual safety 75 series, 75B, 75B Compact, 40B, and SP-01, etc. NOTE: Recommended “Competition” and “Race” gun use only.Produces a 3# or less SA pull weight, not recommended for self-defense use. For all other applications, see our 75100 and 75110 upgrade kits. Absolutely No Substitutions.
Shadow 2 Reach Reduction Kit with ultra-short reset now USPSA Production approved. Cajun Gun Works’ famous RRK that permanently re-positions the trigger rearward with the hammer fully lowered an amazing 5 mm’s and reduces single action pre-travel dramatically. Includes our “old style” stainless steel 85C trigger “Made in the USA” with pre and over-travel screws so you can custom tune to your CZ.
This not only relocates the trigger, but it also doubles as an ultra-short reset for single action.
Includes 2 different hammer pins (1 x HPIN and 1 x 75009) so you can be assured a secure attachment to either the factory hammer or Cajun Gun Works hammer. Lifetime warranty to the original purchaser
New Shadow 2 ultra-short reset disconnector. After extensive testing, we have engineered a new disco just for the Shadow 2. This part will drop into most S-2’s and require no fitting, however, due to the timing variations from pistol to pistol, some very slight fitting may be needed on some S-2’s.
This ''Follower Kit'' includes: A "Grams Format" follower (CL) & (13coil) spring. For use in CZ "large frame" (Tactical Sport/Checkmate), 9x19 or 40&w magazines, that measure up to 171mm long (with a base pad attached).
A truly ergonomic, shooter focused flat top grip for AR platform rifles and chassis systems. Designed for performance by creating a better interface between the shooter and firearm, the Ergo Grip is still the standard by which positive grip and shooter comfort are measured. The Ergo Grip comes with the patented Gapper™ for increased comfort. Very similar in size to the Original ERGO Grip
Knights Armament Company, Top Rail Rubber Thumb Rest, Fits Picatinny, Black Finish
BUTTSTOCK, PISTOL GRIP(NTG), & M-LOK VERTICAL FOREGRIP COMBO - MIL SPEC +®
The Daniel Defense adjustable buttstock is constructed of a proprietary blend of glass infused polymers and finished off with soft touch rubber overmolding in strategic points. The new buttstock is precision formed for mil-spec receiver extensions to have very little forward or lateral play that is so common in many other buttstocks. This eliminates the need for a tensioning device or friction lock. All of this results in a durable buttstock that will give the shooter a comfortable and repeatable cheek weld and unprecedented control of the firearm. The buttstock can be run with one of two included buttpads or without any buttpad at all to custom fit the rifle to whatever gear the operator must wear. The buttpads come in two sizes: a thicker convex shape (0.8”), and a thinner concave shape (0.5”); designed to keep from snagging when shouldering the rifle. Limited rotation QD swivel attachment points are integrated on both sides of the buttstock for ambidextrous sling connection.
PISTOL GRIP
The new Daniel Defense pistol grip is an improvement to the old standby A2. We designed our grip with ergonomics and controllability in mind. Our grip shares the angle of the classic 1911 pistol for the most natural hand position and comfortable feel. This pistol grip incorporates an oversized trigger guard covering the gap between grip and lower receiver which can wear on the shooters hand and easily accommodates for gloves. Installation is simplified by the fact the integral trigger guard doesn’t require a roll pin so there is a reduced chance of damaging the lower receiver. A soft touch overmolding section enhances grip, wet or dry.
ELF AR-9 Match Trigger
Product Description
Kit includes: - Spring Buffer Pad - Custom Buffer Pin - Set Screw - Allen Wrench - 3 Springs: "Red" Standard Power .062 "Green" Reduced Power .055 "Blue" Lightest Power .047
Please see recommendations for matching Springs
YELLOW Carbine Spring recommended for most Standard Applications min 115 Power Factor up to 145 Power Factor.
WHITE Carbine Extra Long Spring recommended for 140 Power Factor and Above.
Product Details
The Magpul PMAG Ranger Plate is a floorplate replacement for all 7.62x51 PMAG LR/SR GEN M3 magazines that incorporates an integral loop similar to the original Magpul USGI Ranger. When installed on the base of the magazine, the PMAG Ranger Plate provides unsurpassed speed and control during high stress, tactical magazine changes.
Made in U.S.A.
Designed as a drop-in upgrade for the standard AR15/M4 pistol grip, The MOE-K Grip provides an extremely low profile and compact design with a steeper grip angle compared to more traditional styles. The more vertical grip angle is optimized for use on PDW (Personal Defense Weapon) configurations and improves comfort and control on short LOP rifles that bring the primary hand in closer to the shooter's body. The thin profile and lack of backstrap 'beavertail' also makes it an excellent choice for shooters who prefer a smaller grip circumference. All mounting hardware included.
Features
Similar in concept to the Magpul Ranger Plate™ for AR15/M16 magazines, the SpeedPlate allows for rapid magazine extraction and positive handling. Protects the base of magazine from impact.
The SpeedPlate replaces the floorplate on all factory Fully Metal Lined (FML) GLOCK 9mm and .40S&W double-stack pistol magazines.*
*NOTE: SpeedPlate is NOT compatible with the Magpul® GL9 series of PMAGs®.
The MS1 Padded Sling is an optimized, dedicated two-point sling that serves equally well in a one-point role when using optional adapters. Built around our MS1 slider, this system provides rapid adjustments to either lengthen or shorten the sling with no slipping once set, and no tails, loops, or other potential snag hazards. In a two-point role, the MS1 allows easy shoulder transitions, rapid adjustability for hands free rifle carry and shooting support from various positions. The MS1 system also has a series of adapters that are sold separately and based on the MS3® and MS4™ slings. By adding the appropriate adapter (available with Paraclip™ or QD Sling Swivel) for the sling, you can easily add one-point functionality to your MS1.
FEATURES
The PMAG Minus 10 Round Limiter installs in 20 or 30 round GEN M3 PMAG bodies, reducing the magazine capacity by ten rounds. Designed for sporting and hunting applications, installation of the Limiter is simple, tool-less, and requires no permanent modification of the magazine body.
NOTE: Will NOT make a banned magazine legal! This product is intended for TEMPORARY capacity reduction of PMAG AR/M4 GEN M3 magazines. This product does not constitute a permanent capacity reduction. The user is responsible for knowing applicable laws in any jurisdiction that restricts magazines based on capacity or regulates magazine capacity for hunting. Please check all laws and regulations of your state and locality to determine the legality of your host ammunition magazines.
JP .223 Enhanced Gas Rings
As a replacement for traditional three-piece gas rings, the JPEGR-223 utilizes a one-piece design similar to the McFarland rings. Unlike the McFarland rings, though, our precision-ground gas rings are engineered to precisely suit small-frame carrier group components such as our own JP EnhancedBolt™.
After testing numerous minute grind callouts, the final JP Enhanced Gas Rings spec is the perfect balance of a solid gas seal with a very low-friction relationship between rings and bolt carrier. Reducing the resistance between these components directly results in an overall increase in the rifle's operational window while the edge of the rings utilizes the cycling action itself to scrape the walls of the carrier, helping shed fouling with every shot.
JP Enhanced Reliability Spring Kit
This spring kit will yield a 3.5-4.0 lb. trigger pull with JP Fire Control parts. This kit is intended for use with JP trigger parts and will not necessarily yield substantial change on standard AR-15 trigger components.
Application: Use of this spring kit allows for use of ammunition with low-sensitivity primers such as those found in NATO-spec and various foreign-manufactured ammunitions, but in the case of large-frame ARs and duty/defense rifles, domestic-manufactured ammo is strongly recommended to ensure 100% ignition reliability.
The instructors for Magpul's training division wanted a 1911 grip with advanced features, improved control characteristics, and Magpul value. These grips were designed with their input and testing.
Constructed of heavy-duty reinforced polymer, MOE 1911 Grip Panels have a unique diamond-shaped cross section to prevent twisting in the hand, aggressive magazine release cut-out, positive anti-slip texture, and are compatible with ambidextrous safeties. The grips are designed to fit full size framed 1911s with standard grip screw bushings.
The MBX "Patent Pending" Buffer is Designed specifically for Pistol Carbine Caliber.
Features an Internal Spring captured within the Buffer to allow for the Buffer/Bolt speed to be significantly reduced during the cycling of the Firearm, resulting in an Extreme Reduction with Felt Recoil.
- Buffer weight 6.8 ozs - Overall length 4.9 inches - Made from Stainless Steel - Includes internal .062 recoil reduction spring - Captured Pin Design to ensure reliability and Performance
2 Adjustable Stoke Lengths: - 1.400 Stroke Long - .900 Stroke Short
In the MBX Buffer tube these parts move at the same velocity as the bolt and run much smoother and silent with a little oil. - Oil the MBX Buffer inside and out - Wipe the main Buffer spring with an oily cloth to add lubrication to the spring - Any medium to light weigh oil is good
MBX 9mm PCC Compensator "Patent pending"
Designed specifically for competition shooting to achieve the best performance possible with the lower gas volume Pistol Caliber Rifle.
Extra tall port design along with offset side semi circle design for increased surface area. Resulting in highly efficient gas redirection which creates improved downforce and greater stability for the ultimate in dot tracking and follow up shots.
- 20 Deg rear slope port configuration increases compensator forward brake motion to aid in felt recoil.
- Made from T6 aluminum, hard anodized for light weight and durability.
- Includes threaded lock nut for easy installation and 6/32 tapped set screw to aid in installation or pinning if required.
- 3" overall length, .875 wide & 1 1/4" tall
- Available threads: 1/2 x 28 & 1/2 x 36
- Weight: 2.4oz
Mil-spec 6-position buffer tube manufactured from 7075 aluminum with black anodized finish.
Tube only; endplate and castle nut not included
Nordic Components, Extended Magazine Release for 10/22 Rifles, Black Finish
The Super Charging Handle (SCH®) is 3D machined from a solid block of aircraft grade 7075-T6 aluminum. Its ambidextrous design allows for seamless operation from either side of the weapon.
SUPER CHARGING HANDLE (SCH®) 5.56
The Super Charging Handle (SCH®) is 3D machined from a solid block of aircraft grade 7075-T6 aluminum. Its ambidextrous design allows for seamless operation from either side of the weapon. The levers are dual contoured similar to that of the charging handle of an M14, where not only the x-axis but also the y-axis receive radius cuts. The handling surface of the lever is also checkered, adding a textured grip aiding to the use when operating with gloves. The heightened rear lip of the SCH aids in mitigating gas blow back to the shooter when shooting with short barreled and suppressed weapon systems. All parts are then Type 3 Hardcoat anodized and are available in black
SUPER DYNAMIC 3 GUN (SD-3G) TRIGGER
The Geissele Super Dynamic 3 Gun (SD-3G) Trigger is based on the S3G Trigger. Like the S3G, the SD-3G has a shortened pull length and a lightning-quick reset to give it a unique, hybrid trigger pull that is a cross between a traditional two-stage and single-stage trigger while still retaining the safety and robustness of a two-stage combat trigger. The SD-3G’s flat trigger bow further enhances the trigger’s performance by reducing the perceived pull weight and improving the trigger’s tactile feedback to the operator making it ideally suited for 3 Gun competition shooting.
The Geissele Hi-Speed National Match Trigger Series is designed for NRA High Power Rifle competition with highly modified match-grade AR-15-type rifles. The Service Rifle, Designated Marksman Rifle, and Match Rifle Spring sets are all included in this purchase.
Desgined for use with 22LR AR conversions. 25rd Capacity.
Super Dynamic Enhanced SD-E AR Trigger
The Geissele Super Dynamic-Enhanced (SD-E) Trigger featuring an exclusive flat trigger bow, is a finely-tuned two stage trigger providing enhanced trigger control and weapon accuracy while maintaining the robustness and reliability of our combat-proven two-stage trigger.
Our Gun builders kit includes most of the necessary parts to build up your lower group except the commonly upgraded parts. Does not include Trigger Guard, Fire Control Group, and pistol grip.
Gas Tube Kit, Rifle
Parts Kit, AR15, Bolt Rehab
Armanov Magazine Base Pad for CZ 75, Shadow2, SP01 MaxxxGrip +2Rnd has extremly high gripping force so handling is much more secure and precise. Bottom of magazine pad is covered with special anti-slip material and sides are serrated for maximum grip. This is very important in dynamic sport shooting where you have to change your magazine fast and precise.
Base pad also adds two rounds to increase the magazine capacity from 17 to 19. Legal for IPSC production division. Compatible with all CZ 75 17rnd capacity magazines. CZ Shaodow2 for CZ and Mec-Gar Magazines.
spring not included
Aluminum "Plus-2" adapter to fit on Mec-Gar magazines with a metal floorplate.
Contains:
If used to replace a polymer floorplate this item will leave a gap between the frame and floorplate! Use item F42223-ST for a better fit.
Fits on the following Mec-Gar magazines:
follower not included
Replacement floorplate set to increase the capacity on Mec-Gar Optimum Series flush fitting magazines
FEATURES Caliber .45
Capacity 6 Standard
Carbon Steel Tube, heat-treated for strength
Higher tensile music wire spring
Steel follower
Welded butt-plate
FEATURES Caliber 9 mm
Capacity 8 Standard
The DAA 1911/2011 Ambidextrous Safeties with Shields are precision-made stainless-steel Safeties made with state-of-art Metal Injection Molding (MIM) technology. They are designed for use on any 2011 or 1911 pistol, with some minor fitting required. It is always recommended to have a competent Gun Smith fit safeties!
Take your Shadow 2 or Shadow 1 from great to OMG! This will transform your S-2, delivering an ice crisp SA of 3 lbs. or less. DA typically runs 6 lbs. or less using our famous HS-12000 (11.5#) hammer spring. The disconnector will require minor fitting so you get the reset to a PERFECT 1 mm, which is not difficult to do with CGW tech support. Turns the CZ lock work into a precision Swiss watch! USPSA Production legal too!
MBX Z-Max 11 Coil Spring & Competition Follower Set for 140mm & 126mm MBX STI/SVI style tubes
1911
Пистолет
AR15 винтовка
Дробовик
Другое
детали карабина пистолетного калибра
