Select your country
Please select your country
Cart is empty
No items found matching the search criteria
The Taran Tactical Innovations GLOCK +3/4 Base Pad works on GLOCK models 17/17L/22/24/34/35. This base pad will add 4 extra rounds in 9mm and 3 extra rounds in 40 Caliber to the magazine. This base pad does add a little extra weight to the magazine which helps the empty mag drop free easier for faster reloads. This TTI GLOCK base pad, just like all of our base pads, is designed to give you the edge over your adversaries. We use our patented push pin design to lock the base pad to the magazine, which makes for easy field stripping and cleaning your magazines between stages. Just push down the pin, slide the base pad onto the magazine and push the pin up to lock the base pad onto the magazine. Our one piece design is great because there are no extra parts or tools needed to attach the base pad to your magazine. The base pad itself is machined out of billet aluminum and is hard anodized to ensure durable long lasting color. All machining and manufacturing is done in the USA.
Will not work on GLOCK 19
New generation of high performance magazines for BUL SAS II type. Made of heat treated 410 stainless steel for level of quality and durability. A spacer is not required for 9mm / .38 cartridges.
Choose between either our 16”and 18'' .223 Wylde or 11.5” 5.56 barrels
12 ga. Low Drag Follower, 12 ga. Low-Drag Follower for Benelli Nova/Super Nova and Vinci/Super Vinci
HARRIS BIPODS
The 7.62x51 NATO (.308 Winchester) PMAG 20 LR/SR GEN M3 is a lightweight, cost effective, high reliability magazine for SR25/M110 pattern rifles featuring true 20-round capacity, constant-curve body, anti-tilt follower, and snap on Impact/Dust Cover. Designed specifically for SAAMI-spec ammunition, the PMAG 20 LR/SR is less than half the weight of standard issue steel magazines and maintains a service life round count approximately equal to the rifle barrel itself.
Product Details
The PMAG 30 AK/AKM GEN M3 is a durable, lightweight, high reliability 30-round polymer magazine designed for Kalashnikov pattern rifles in 7.62x39mm (AK-47, AKM, AKS, SIG556R, and others.)
It features steel-reinforced locking lugs, removable floorplate, constant curve geometry, and a high-reliability/low-friction follower for the performance and military-grade durability you expect from a PMAG.
The MOE Stock – Mil-Spec Model (Magpul Original Equipment) is a drop-in replacement buttstock for AR15/M16 carbines using mil-spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation.
The Mil-Spec Model includes a standard 0.30" thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.
Made in U.S.A.
The M-LOK MVG is a light weight, inexpensive vertical foregrip that attaches directly to M-LOK compatible hand guards and forends with no additional Picatinny rails required. Made from the same high quality polymer as other Magpul products, the M-LOK MVG uses the new Magpul TSP texture for positive control in all environments.
With rounded contours and a shorter length, it has been optimized for use with the "thumb break method" of shooting and can also be used as a traditional vertical foregrip. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.
The MOE+ Grip combines reinforced polymer body construction with comfortable, wrap-around rubber overmolding for maximum weapon control in adverse environments. With a similar shape to a 'medium' sized MIAD, this AR15 / M4 drop-in design features a hard-polymer bottom edge to reduce the possibility of equipment snags or grip damage. The MOE+ Grip accepts optional Storage Cores for gear stowage and includes a basic grip cap.
Designed for use with all M-LOK compatible hand guards and forends, our 11-slot M-LOK Polymer Rail Sections provide a cost effective method of attaching various 1913 Picatinny-Spec rail-mounted accessories such as lights, vertical grips, etc. Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight, our M-LOK Polymer Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges.
The MOE Trigger Guard (Magpul Original Equipment) is an enhanced polymer drop in replacement for the AR15/M4 weapons platform. It features a shallow "V" shape for better use of gloves in tactical shooting or cold weather operations. The MOE Trigger Guard is non-folding, has rounded edges, and fills the annoying "gap" at the rear of the standard trigger guard. Also works well with most 7.62x51 AR platforms but some custom fitting may be required. All mounting hardware included.
White Label Armory AR15 gas tubes.
FEATURES:
MBX "Fang" CTR & Hogue Stock Extensions
The 9mm Silent Captured Spring is a drop-in component that softens recoil and reduces cycling noise and vibration in your 9mm carbine. The result is a refined rifle that's a pleasure to shoot. Paired with our 9mm bolt assembly, you have the most reliable 9mm operating system available. The 9mm Enhanced Version provides the same buffering mass as our standard 9mm SCS. At the same time, we've increased overall bolt mass slightly with more room for increased weight if needed. The result is even softer recoil thanks to a further delay in blowback.
GEN 2 AR-15 Silent Captured Spring Builder with Alternative Spring Pack
Standard Version
Includes SCS unit, five alternative weight springs and spacer to allow for installation in both carbine- and rifle-length buffer tubes.
The JPSCS2-15 will not function with older Primary Weapon Systems (PWS) bolt carriers. The design of the carrier will prevent the rifle from cycling.
Recoil Eliminators
Whether you're an practical rifle competitor, a varmint hunter, a member of a special military or police tactical team or just a plinker, sight recovery is the name of the game. Lower the recoil and you reduce muzzle flip, which leads to faster sight recovery and faster follow-up shots. Every compensator operates on this principle, but none can match the classic JP Recoil Eliminator. This design has been with us almost as long as JP has been in business. "Radical performance" was the goal then--it was the 90s, remember--and that still holds today with the Recoil Eliminator still providing the fastest possible sight recovery and the highest level of recoil reduction of any device on the market, including our own line of compensators.
Functional above all else, the brake's broad baffle surfaces redirect the vast majority of muzzle gases out to the sides with each shot. This actually drives the rifle forward during fire, counteracting the rearward recoil impulse for both minimized overall movement and muzzle flip coupled with reduced fatigue from constant fire, particularly with large-bore rifles. The JPRE also shapes these gases so as to spare the shooter from any concussion as well as the annoyance of thrown dust when shooting off a bipod.
A better shooting experience in every way; that's what the Recoil Eliminator delivers. Over two decades of reviews and match wins tell the tale.
Created as an evolution of the original MOE 1911 Grip Panels, the 1911 Grip Panels with TSP texture offers the user a more aggressive texture allowing for better control of the weapon in all environments.Constructed of heavy-duty reinforced polymer, the grips have a unique diamond-shaped cross section to prevent twisting in the hand, an aggressive magazine release cut-out, aggressive TSP texture (Trapezoidal Surface Projections) for positive control, and are compatible with ambidextrous safeties. The grips are designed to fit full size framed 1911s with standard grip screw bushings.
Features
Mag Springs designed to fit a "Grams Format" follower. They are a replacement spring for any of the Grams "Follower Kits".
All of the functional requirements are met while keeping the weight under 6 ounces. This stock adapts and changes to your environment or operational needs by utilizing custom accessory mounts and accepts a new optimized sling configuration. The lightest stock of its kind in the market.
? Slide-on replacement for collapsible butt stock? Angled non-slip rubberized buttpad allows faster presentation, even with body armor? Multiple Sling Slots with single point mounting? Quick Detach Sling mounting point is positioned for optimum usage including ambidextrous shooters? Upper section provides enhanced cheek weld? MilSpec Buffer Tube Spec
Mil Spec size 1.148 diameter receiver extensions (buffer tube)
Weight: 5.8oz
Height: 5.22"
Width: 1.752"
Length: 7.084"
Commercial spec size 1.17 diameter receiver extenstions (buffer tubes)
This easy to install, inexpensive, drop in upgrade is perfect for any AR rifle. CNC machined from a solid piece of 6061-T6 aluminum, the Billet Mag Release Button is larger and easier to manipulate than the Mil-Spec version. A diamond texture face and a blind threaded hole keep the lines clean and give it unique styling.
Fits Beretta 682, Some 687 models, Silver Hawk, DT10, Some 391 models
These Optima Choke tubes are available in internal and external versions for 12 gauge shotguns. They are longer and slimmer than conventional Mobilchoke tubes. Thanks to the elongated cone they minimize pellet deformation and improve shot patterns. The various versions are fully interchangeable on 12 gauge guns with Optima Bore barrels. These choke tubes are for 12 gauge shotguns with the Optima-Choke system only.
Does not fit Benelli.
Bul 1911 modular trigger.
Trigger shoe B is included in the package.
NOTE
Other trigger shoes sold separately: https://cesar-shop.com/firearm...
Modular trigger shoe 1911 and 2011 Bul modular trigger.
FEATURES
Use the TTI Base Pad with the TTI spring and TTI Follower for maximum capacity. This Patented push pin design is indestructible and will not come off until you are ready to remove it. One Piece construction made from solid aluminum, will not break or come loose, which is essential in the heat of competition. This base pad allows the magazine to be disassembled in seconds with one hand and no tools. You don’t have to worry about losing small parts or specialty tools to disassemble it.
Pistol parts
AR15 and other rifle parts
Shotgun parts
Other parts
PCC specific parts
