Select your country
Please select your country
Cart is empty
No items found matching the search criteria
The Ultimate Firing Pin is CNC Precision machined from 17-4 Stainless steel, and heat treated to increase its hardness and lifespan.
Its weight has been increased over factory to increase the kinetic energy being transferred into the primer.The ultimate FP is also extended to allow a deeper hit into primers over the factory FP. Matched with a lighter FP spring these two will give you a hard hitting reliable combo to set off the hardest of primers.
CGW’s new CZ P-10 C short reset trigger. Drops in and produces a reduction in pre-travel. The over-travel stop is built into the trigger body.
This magwell is intended for open division shooters wanting to add weight to their gun with no modifications, this is a "plug and play" part.
For open division - will not fit the IPSC standard division box.
EXTREMELY HEAVY: 597g
Eemann Tech extractor for ADC PCC AR-9 rifles and their clones.
COMPATIBLE WITH: ADC PCC, Bul PCC, Troy PCC, Others
MBX Z-Max 11 Coil Spring & Competition Follower Set for 140mm & 126mm MBX BUL style tubes.
MBX Z-Max 13 Coil Spring & Competition Follower Set for 170mm & 155mm MBX BUL style tubes.
Competition Follower does not activate slide stop when mag is empty.
The MOE AK+ Grip combines reinforced polymer body construction with comfortable, wrap-around rubber overmolding for maximum weapon control in adverse environments.
Robert's 3 piece spring set for 1911/2011/SAS will elevate your pistol to a new level.
Minimum quantity for "RC-TECH Progressive Hammer Spring 1911 / 2011 / SAS" is 2.
HIPERFIRE PDI Trigger
Improvs magazine handling speed and precision of your Sig P226, X5 or LDC pistol. IS MAGWELL COMPATTIBLE! It also adds +2 rounds to increase the magazine capacity from 17 to 19 using the stock magazine springs, but the superb handling and grip is what truly makes this base pad a worthwhile upgrade.
Eemann Tech Disconnector Spring for CZ Scorpion EVO 3. Reduced-power springs provide lighter trigger pull for improved accuracy in competition shooting.
The Eemann Tech GLOCK Competition Springs Kit allows you to lighten the trigger pull weight for your GLOCK 43/43X. The GLOCK trigger pull weight is determined by spring weight and GLOCK connector.
Sig MPX Magazine Base Pad increases original magazines capacity by 5 extra rounds. Made from super durable solid Nylon, it adds gripping surface and more solid grip. Installed in seconds and without use of tools.
This Magazine Pad for Sig Sauer drastically improves the gripping action of your pouched magazines thanks to deep side grooves and added surface area.
Oversized Magwell for ADC PCC rifles. 3D printed and designed to make your reloads as fast as possible when they really count.
ADCs special 12" round competition handguard for PCC rifles, is designed to be as low-profile as possible, to enable fast and controlled shooting. Specially designed for PCC rifles that are designed on AR platform.
The M5 Plus handguard is 100% made in Italy, CNC machined, it was designed primarily to maximize the particular design that features the ADC carbines, allowing compatibility with other AR platforms. It is characterized by a free-float design an octagonal profile with full size picatinny. It uses the M-LOK system for attaching further accessories.
Lightweight but incredibly strong, our PMAG D-50 MP is a highly reliable, 9x19mm Parabellum, 50-round drum magazine for HK94/MP5 large-format pistols and pistol caliber carbines. Providing 50-round capacity, the unique drum configuration keeps the height of the magazine manageable, allowing for prone firing and easier storage.
Lightweight but incredibly strong, our PMAG D-50 MP is a highly reliable, 9x19mm Parabellum, 50-round drum magazine for CZ Scorpion EVO pistol caliber carbines. Providing 50-round capacity, the unique drum configuration keeps the height of the magazine manageable, allowing for prone firing and easier storage. For easy loading, it includes a ratcheting loading lever that removes tension from the internal spring
The two-part design of the BoreLock muzzle brake provides for secure, simple, and quick installation.
The new DUAL556-S-BL (141 mm) is 19 % shorter than original DUAL556-BL (175 mm). Suppressor represents the newest advanced flow through technology. The flow-through design is optimal for semi and fully automatic rifles. DUAL556-S-BL is ultra-compact and efficient suppressor for demanding professional users. Suppressor is especially made for CQB weapons.
Bul 3.0lb connector for AXE models and Glock gen3.
Mounting thread adapter for Aimsport silencers.
The SAI M80 family of silencers / suppressors has its basis in the lock & twist mounting system developed by SAI. This locking system enables the user to fit the M80 to the standard NATO flash suppressor without the need of tools and without any alterations to the firearm.
Triton no.3 silencer for cal. 9mm, with 1/2x28 UNEF thread adapter. Changing thread is easy, just replace the stainless steel barrel nut.
SIG SAUER factory minimalist plus, folding stock installs easily on your MCX/MPX via the receiver's 1913/picatinny interface.
M-LOK mount for clip-on slings. Mounts to M-LOK compatible hand guards and forends. Accepts clip-style attachments such as our own Paraclip.
The MS4 Dual QD GEN2 incorporates a new, low profile quick-adjust slider which minimizes bulk and allows for secure, yet effortless, sling adjustment. Webbing length has also been increased for a comfortable fit with all body types and armour configurations.
Designed for use with 1913 Picatinny railed hand guards, the RVG is a basic, light weight, cost-effective vertical fore grip. Shape is ergonomically designed for use as a traditional vertical grip. It has also been optimized for use with the "thumb break method" of shooting.
Recoil spring for BUL Light and Ultralight 3.25" models. For both 1911 and 2011 models.
Set of replacement pins for BUL AXE pistols. Fits Compact and FullSize models.
It provides flexibility and durability in a versatile sling framework. The OPS can also increase operator survivability by keeping the weapon in the battle if there should be a case of injury to the operator’s shoulder, arm, or hand. Style and appearance may vary.
The MS1® Sling is the most versatile addition to the Magpul® line of rifle slings. Built around our MS1 slider, this system provides rapid adjustments to either lengthen or shorten the sling with no slipping once it's set, with no tails, loops, or other potential snag hazards.
The RSA QD provides a forward attachment point for the Magpul MS4® Sling and other push-button QD slings. Made from corrosion resistant steel, mounts on 1913 Picatinny rail, and places the attachment point at an angle optimized for comfortable two-point sling use while maintaining easy push-button access.
The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Our lightweight Mil-Spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. Its low-profile design conceals its internal mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between user configurations.
M-LOK Type 2 Rail Covers are low-profile, two-piece covers that install directly onto most M-LOK aluminum hand guards (non-polymer). This pack of six M-LOK covers is non-orientation specific, which allows the user to mount them in any direction desired without affecting function. Not compatible with MAGPUL MOE M-LOK, MOE SL and SGA forends, and may not be compatible with free-float hand guards that have a wider and flatter profile, as they will not seat deep enough to allow the center portion to lock in.
The MS3 Multi-Mission Sling System was designed to give a versatile weapon-retention solution for a multitude of tactical environments and missions. As a standalone product, the rapidly-convertible MS3 allows an operator to leverage the maneuverability of one-point attachment for direct action, or two-point attachment for stability. Single-hand adjustments and quick-release, positive-locking hardware provide flexibility and durability in a truly adaptable sling system.
Magazine for Glock pistols and those who use Glock magazines.
Kummer CZ Alu DotMatrix ERGO Grips are 3D designed and CNC machined, they have a golf ball pattern that provides enough texture to give the shooter confidence that they can grip the gun no matter the situation. Whether you are upgrading your existing pistol or designing the optimal competition pistol, these grips offer the sure grip that every shooter needs.
Similar to original thickness, Kummer Corundum Grips offer enhanced grip due to grip tape inserts. They also improve aesthetics of your firearm.
Eemann Tech Hammer Spring for AR-15. 10% less than original AR-15 hammer spring.
Pistol parts
AR15 and other rifle parts
Shotgun parts
Other parts
PCC specific parts
