Seleziona il marchio
 
Marca

Napredno iskanje

Parti di armi da fuoco


33.35  
Disponibile
+




19.67  

Kit includes: 
- Spring Buffer Pad 
- Custom Buffer Pin 
- Set Screw 
- Allen Wrench 
- 3 Springs: 
   "Red" Standard Power .062
   "Green" Reduced Power .055
   "Blue" Lightest Power .047

Disponibile
+

22.94  

Please see recommendations for matching Springs

YELLOW Carbine Spring recommended for most Standard Applications min 115 Power Factor up to 145 Power Factor.

WHITE Carbine Extra Long Spring recommended for 140 Power Factor and Above.

Disponibile
+




24.55  

Product Details

The Magpul PMAG Ranger Plate is a floorplate replacement for all 7.62x51 PMAG LR/SR GEN M3 magazines that incorporates an integral loop similar to the original Magpul USGI Ranger. When installed on the base of the magazine, the PMAG Ranger Plate provides unsurpassed speed and control during high stress, tactical magazine changes.

Made in U.S.A.

Disponibile
+

22.91  

Product Details

Designed as a drop-in upgrade for the standard AR15/M4 pistol grip, The MOE-K Grip provides an extremely low profile and compact design with a steeper grip angle compared to more traditional styles. The more vertical grip angle is optimized for use on PDW (Personal Defense Weapon) configurations and improves comfort and control on short LOP rifles that bring the primary hand in closer to the shooter's body. The thin profile and lack of backstrap 'beavertail' also makes it an excellent choice for shooters who prefer a smaller grip circumference. All mounting hardware included.

Made in U.S.A.

Features

  • Replacement for AR15/M4 pistol-grip*
  • One-piece reinforced polymer construction
  • More vertical grip angle than standard A2 grips
  • Minimalist design provides for a compact and thin profile
  • Aggressive TSP texture (Trapezoidal Surface Projections) for positive weapon control in all environments
Disponibile
+

15.57  

Product Details

Similar in concept to the Magpul Ranger Plate™ for AR15/M16 magazines, the SpeedPlate allows for rapid magazine extraction and positive handling. Protects the base of magazine from impact.

The SpeedPlate replaces the floorplate on all factory Fully Metal Lined (FML) GLOCK 9mm and .40S&W double-stack pistol magazines.*

*NOTE: SpeedPlate is NOT compatible with the Magpul® GL9 series of PMAGs®.

Made in U.S.A.



69.67  

Product Details

The MS1 Padded Sling is an optimized, dedicated two-point sling that serves equally well in a one-point role when using optional adapters. Built around our MS1 slider, this system provides rapid adjustments to either lengthen or shorten the sling with no slipping once set, and no tails, loops, or other potential snag hazards. In a two-point role, the MS1 allows easy shoulder transitions, rapid adjustability for hands free rifle carry and shooting support from various positions. The MS1 system also has a series of adapters that are sold separately and based on the MS3® and MS4™ slings. By adding the appropriate adapter (available with Paraclip™ or QD Sling Swivel) for the sling, you can easily add one-point functionality to your MS1.

FEATURES

  • Dedicated two-point sling with integrated padded section
  • Custom variable-width tubular webbing (1-1/4" to 1-7/8") is strong and wear resistant while remaining anti-chafe for user comfort
  • High-grade, ripstop coated, closed cell foam pad is sewn to the inside of the sling webbing for protection and strength
  • Rapidly adjustable for length (shorter or longer) with new MS1® Slider
  • No tails, loops, or other potential snag hazards
  • Light weight yet durable hardware made of heavy-duty polymer
  • Colored webbing has Near Infrared (NIR) treatment to reduce IR signature
  • Can be configured for two to one-point convertibility with optional adapters



17.21  

Product Details

The PMAG Minus 10 Round Limiter installs in 20 or 30 round GEN M3 PMAG bodies, reducing the magazine capacity by ten rounds. Designed for sporting and hunting applications, installation of the Limiter is simple, tool-less, and requires no permanent modification of the magazine body.

NOTE: Will NOT make a banned magazine legal! This product is intended for TEMPORARY capacity reduction of PMAG AR/M4 GEN M3 magazines. This product does not constitute a permanent capacity reduction. The user is responsible for knowing applicable laws in any jurisdiction that restricts magazines based on capacity or regulates magazine capacity for hunting. Please check all laws and regulations of your state and locality to determine the legality of your host ammunition magazines.

Made in U.S.A.

Disponibile
+

15.57  

JP .223 Enhanced Gas Rings

As a replacement for traditional three-piece gas rings, the JPEGR-223 utilizes a one-piece design similar to the McFarland rings. Unlike the McFarland rings, though, our precision-ground gas rings are engineered to precisely suit small-frame carrier group components such as our own JP EnhancedBolt™.

After testing numerous minute grind callouts, the final JP Enhanced Gas Rings spec is the perfect balance of a solid gas seal with a very low-friction relationship between rings and bolt carrier. Reducing the resistance between these components directly results in an overall increase in the rifle's operational window while the edge of the rings utilizes the cycling action itself to scrape the walls of the carrier, helping shed fouling with every shot.

Disponibile
+

19.66  

JP Enhanced Reliability Spring Kit

This spring kit will yield a 3.5-4.0 lb. trigger pull with JP Fire Control parts. This kit is intended for use with JP trigger parts and will not necessarily yield substantial change on standard AR-15 trigger components. 

Application: Use of this spring kit allows for use of ammunition with low-sensitivity primers such as those found in NATO-spec and various foreign-manufactured ammunitions, but in the case of large-frame ARs and duty/defense rifles, domestic-manufactured ammo is strongly recommended to ensure 100% ignition reliability.


20.45  

The instructors for Magpul's training division wanted a 1911 grip with advanced features, improved control characteristics, and Magpul value. These grips were designed with their input and testing.


Constructed of heavy-duty reinforced polymer, MOE 1911 Grip Panels have a unique diamond-shaped cross section to prevent twisting in the hand, aggressive magazine release cut-out, positive anti-slip texture, and are compatible with ambidextrous safeties. The grips are designed to fit full size framed 1911s with standard grip screw bushings.

Made in U.S.A.

Features

  • Fits Full Size Frame 1911s and copies with standard grip screw bushings
  • Reinforced polymer construction
  • Unique diamond-shaped cross-section to prevent twisting in the hand
  • Aggressive magazine release cut-out
  • Compatible with ambidextrous safeties
  • Positive, anti-slip texture


Disponibile
+

196.71  

The MBX "Patent Pending" Buffer is Designed specifically for Pistol Carbine Caliber. 

Features an Internal Spring captured within the Buffer to allow for the Buffer/Bolt speed to be significantly reduced during the cycling of the Firearm, resulting in an Extreme Reduction with Felt Recoil.

- Buffer weight 6.8 ozs - Overall length 4.9 inches - Made from Stainless Steel - Includes internal .062 recoil reduction spring - Captured Pin Design to ensure reliability and Performance

2 Adjustable Stoke Lengths: - 1.400 Stroke Long - .900 Stroke Short

In the MBX Buffer tube these parts move at the same velocity as the bolt and run much smoother and silent with a little oil. - Oil the MBX Buffer inside and out - Wipe the main Buffer spring with an oily cloth to add lubrication to the spring - Any medium to light weigh oil is good

Please see recommendations for matching Springs

YELLOW Carbine Spring recommended for most Standard Applications min 115 Power Factor up to 145 Power Factor.

WHITE Carbine Extra Long Spring recommended for 140 Power Factor and Above.

Disponibile
+

122.95  

MBX 9mm PCC Compensator "Patent pending"

Designed specifically for competition shooting to achieve the best performance possible with the lower gas volume Pistol Caliber Rifle.

Extra tall port design along with offset side semi circle design for increased surface area. Resulting in highly efficient gas redirection which creates improved downforce and greater stability for the ultimate in dot tracking and follow up shots.

- 20 Deg rear slope port configuration increases compensator forward brake motion to aid in felt recoil.

- Made from T6 aluminum, hard anodized for light weight and durability.

- Includes threaded lock nut for easy installation and 6/32 tapped set screw to aid in installation or pinning if required.

- 3" overall length, .875 wide & 1 1/4" tall

- Available threads: 1/2 x 28 & 1/2 x 36

- Weight: 2.4oz

Disponibile
+

28.68  

Mil-spec 6-position buffer tube manufactured from 7075 aluminum with black anodized finish.

Tube only; endplate and castle nut not included

Disponibile
+

29.51  

Nordic Components, Extended Magazine Release for 10/22 Rifles, Black Finish


302.46  


The Timney replacement trigger for the Sig Sauer MPX is the latest in the Timney lineage of semi-automatic, replacement triggers.  Timney collaborated directly with SIG on the design and features of the MPX drop in replacement trigger. 

The trigger, hammer, and bridge are constructed of heat-treated steel.  The housing is machined from 6061 T6 anodized alloy and the trigger is heat treated steel and coated with black oxide .

The trigger is single stage and features a straight blade. The Timney replacement trigger for the SIG MPX is a self-contained, 100% drop-in trigger ready to install in your rifle for an exceptionally smooth, crisp, trigger pull with no gunsmithing, fitting, or adjusting required.

The MPX replacement from Timney features a hardened steel bridge to protect the trigger components from the vigorous bolt blow back characteristics prominent in Pistol Caliber Carbines. 

The single stage trigger features a non adjustable trigger pull weight of 4.5 pounds. Drop in installation is simple once the Factory trigger is removed, you will reuse the factory Hammer and Trigger pins.

Set screws are located in the housing to lock the trigger in place and prevent the pins from walking out of place. 

The Timney drop in MPX trigger works with the factory safety as well as many aftermarket replacements, especially the Timney 49r ambidextrous, short throw safety available here on the website. 


127.05  

The Super Charging Handle (SCH®) is 3D machined from a solid block of aircraft grade 7075-T6 aluminum. Its ambidextrous design allows for seamless operation from either side of the weapon.

SUPER CHARGING HANDLE (SCH®) 5.56

The Super Charging Handle (SCH®) is 3D machined from a solid block of aircraft grade 7075-T6 aluminum. Its ambidextrous design allows for seamless operation from either side of the weapon. The levers are dual contoured similar to that of the charging handle of an M14, where not only the x-axis but also the y-axis receive radius cuts. The handling surface of the lever is also checkered, adding a textured grip aiding to the use when operating with gloves. The heightened rear lip of the SCH aids in mitigating gas blow back to the shooter when shooting with short barreled and suppressed weapon systems. All parts are then Type 3 Hardcoat anodized and are available in black 


Disponibile
+