Firearm parts

• SIG MPX TRIGGER

The Timney replacement trigger for the Sig Sauer MPX is the latest in the Timney lineage of semi-automatic, replacement triggers.  Timney collaborated directly with SIG on the design and features of the MPX drop in replacement trigger. 

The trigger, hammer, and bridge are constructed of heat-treated steel.  The housing is machined from 6061 T6 anodized alloy and the trigger is heat treated steel and coated with black oxide .

The trigger is single stage and features a straight blade. The Timney replacement trigger for the SIG MPX is a self-contained, 100% drop-in trigger ready to install in your rifle for an exceptionally smooth, crisp, trigger pull with no gunsmithing, fitting, or adjusting required.

The MPX replacement from Timney features a hardened steel bridge to protect the trigger components from the vigorous bolt blow back characteristics prominent in Pistol Caliber Carbines. 

The single stage trigger features a non adjustable trigger pull weight of 4.5 pounds. Drop in installation is simple once the Factory trigger is removed, you will reuse the factory Hammer and Trigger pins.

Set screws are located in the housing to lock the trigger in place and prevent the pins from walking out of place. 

The Timney drop in MPX trigger works with the factory safety as well as many aftermarket replacements, especially the Timney 49r ambidextrous, short throw safety available here on the website. 

The Super Charging Handle (SCH®) is 3D machined from a solid block of aircraft grade 7075-T6 aluminum. Its ambidextrous design allows for seamless operation from either side of the weapon.

SUPER CHARGING HANDLE (SCH®) 5.56

The Super Charging Handle (SCH®) is 3D machined from a solid block of aircraft grade 7075-T6 aluminum. Its ambidextrous design allows for seamless operation from either side of the weapon. The levers are dual contoured similar to that of the charging handle of an M14, where not only the x-axis but also the y-axis receive radius cuts. The handling surface of the lever is also checkered, adding a textured grip aiding to the use when operating with gloves. The heightened rear lip of the SCH aids in mitigating gas blow back to the shooter when shooting with short barreled and suppressed weapon systems. All parts are then Type 3 Hardcoat anodized and are available in black 

SUPER DYNAMIC 3 GUN (SD-3G) TRIGGER

The Geissele Super Dynamic 3 Gun (SD-3G) Trigger is based on the S3G Trigger. Like the S3G, the SD-3G has a shortened pull length and a lightning-quick reset to give it a unique, hybrid trigger pull that is a cross between a traditional two-stage and single-stage trigger while still retaining the safety and robustness of a two-stage combat trigger. The SD-3G’s flat trigger bow further enhances the trigger’s performance by reducing the perceived pull weight and improving the trigger’s tactile feedback to the operator making it ideally suited for 3 Gun competition shooting.

The Geissele Hi-Speed National Match Trigger Series is designed for NRA High Power Rifle competition with highly modified match-grade AR-15-type rifles.  The Service Rifle, Designated Marksman Rifle, and Match Rifle Spring sets are all included in this purchase.

Desgined for use with 22LR AR conversions. 25rd Capacity.

Super Dynamic Enhanced SD-E AR Trigger

The Geissele Super Dynamic-Enhanced (SD-E) Trigger featuring an exclusive flat trigger bow, is a finely-tuned two stage trigger providing enhanced trigger control and weapon accuracy while maintaining the robustness and reliability of our combat-proven two-stage trigger.

Rifle lenght gas tube kit.

Parts Kit, AR15, Bolt Rehab

spring not included

FEATURES

Aluminum "Plus-2" adapter to fit on Mec-Gar magazines with a metal floorplate.

1. 7075 aircraft grade hard anodized Aluminum
2. Notch in front offers guide in handling during magazine change!
3. Available in Blue, Red or Grey
4. Does not leave gap between frame and floorplate

Contains:

• 1 - Aluminum "Plus-2" adapter
• 1 - Locking plate - Metal

 If used to replace a polymer floorplate this item will leave a gap between the frame and floorplate!  Use item F42223-ST for a better fit.

 Fits on the following Mec-Gar magazines:

• MGBRHP13 B/N - Browning HP 9mm 13rd - Adds 1 rounds
• MGBRHP15 B/N - Browning HP 9mm 15rd - Adds 2 rounds
• MGBR4010 B/N - Browning .40 10rd - Adds 1 rounds
• MGCZ7516B - CZ 75B 9mm 16rd - Adds 2 rounds
• MGCZ7514B - CZ 75 Compact 9mm 14rd - Adds 2 rounds
• MGRP8515 B/N - Ruger P85/89/93/94/95 9mm 15rd - Adds 3 rounds
• MGRP8517 B/N - Ruger P85/89/93/94/95 9mm 17rd - Adds 2 rounds
• MGSW5917 B/N - S&W 5900 Series 9mm 17rd - Adds 2 rounds

FEATURES

Replacement floorplate set to increase the capacity on Mec-Gar Optimum Series flush fitting magazines

1. Polymer "Plus-2" magazine extender
2. Phosphate steel locking plate, heat-treated. When ordered the complete base pad with locking plate.

Caliber .45, Caliber 9 mm

The DAA 1911/2011 Ambidextrous Safeties with Shields are precision-made stainless-steel Safeties made with state-of-art Metal Injection Molding (MIM) technology. They are designed for use on any 2011 or 1911 pistol, with some minor fitting required. It is always recommended to have a competent Gun Smith fit safeties!

Take your Shadow 2 or Shadow 1 from great to OMG!  This will transform your S-2, delivering an ice crisp SA of 3 lbs. or less.   DA typically runs 6 lbs. or less using our famous HS-12000 (11.5#) hammer spring.   The disconnector will require minor fitting so you get the reset to a PERFECT 1 mm, which is not difficult to do with CGW tech support.  Turns the CZ lock work into a precision Swiss watch!  USPSA Production legal too!

MBX Z-Max 11 Coil Spring & Competition Follower Set for 140mm & 126mm MBX STI/SVI style tubes.

MBX Z-Max 13 Coil Spring & Competition Follower Set for 170mm & 155mm MBX STI/SVI style tubes.

Competition Follower does not activate slide stop when mag is empty.

Bushing screws attach directly to the metal frame. Grip plates than center on the bushing screws and attach with grip screws.