Select your country here
Please select your country
Panier vide
Pas d'items trouvés correspondants à votre critère de recherche
Extractor with 2 springs and plate
Set includes:
1pcs Striker spring Grey 24N
1pcs Striker spring Red 28N
1pcs Striker spring Blue 31N
1pcs Trigger spring
1pcs Firing pin Safety spring
This base pad Race for CZ gives you the best grip and durability.Designed with advanced sports and professional competition shooters.They are legal for IPSC production division and standard division (fits IPSC box).
Prevents expensive frame damage when shooting high-pressure, major power factor loads. Replaceable, poly-fiber washer installs behind the recoil spring on any length guide rod. The shock absorbing action stops the slide from battering the frame. Injection molded for the optimum balance between shock absorption and longevity. Replace every 1,000 rounds.
CGW 10X barrel bushing for the .550” diameter heavy barrel SP-01’s – Shadow 2, SP-01 manual safety and SP-01 Tactical in 9mm and .40 S&W. Also fits 75B in .40. Made from 4140 carbon steel and heat treated to RC 57-59, vastly superior to the loose fitting, soft, non-heat treated OEM bushing. Only works with the standard 4.7” barrel, will not work with any extended or threaded barrels. Reduces barrel muzzle play to -0- at lock-up. This is a direct replacement for the OEM bushing. Many shooters have verified a significant improvement in accuracy.
Note: Very minor fitting may be required, can be installed in minutes with common tools. Will not work with any threaded or extended barrel.
Product Details
The MIAD (MIssion ADaptable) GEN 1.1 Grip is a drop-in replacement for the standard AR15/AR10 grip, now available in two dedicated configurations to fit most receivers. It is designed to improve ergonomics with interchangeable front and rear straps for personalized hand fit, an aggressive texture for positive weapon control, and is compatible with all Magpul grip cores to adapt to various storage needs.
This update to the original MIAD has improved strap retention and also comes standard with the newest grip core that holds an included 1/2 oz. lubrication bottle.
Two sizes are available- this TYPE 1 Kit (MAG520) fits most 5.56x45 and 7.62x51 AR receivers and the TYPE 2 Kit (MAG521) which is required for some 7.62x51 size receivers*. All mounting hardware is included.
Made in U.S.A.
New design Glock base pad. New features is a tight grip and deep side grooves that makes sure your handling is swift and precise, it adds the extra needed support for one-handed manipulation. Magazine base pad fits into the original Glock magazine notches.
Magazine pad is precisely-engineered in our factory and features easy disassembly and assembly without any tools required. Finger grip will make sure that you will get the best out of the product even when using both hands.
Base pads will add additional 2 rounds to your Glock magazine.
They come in 5 colors – Black, Red, Blue, Gold and Silver.
Made in Europe from a solid piece of finest aircraft grade aluminium.
comes with PIN and screw
fits in IPSC, IDPA and USPSA box
weight 40 grams with pin and screw
Brass version
https://cesar-shop.com/product/1911-magwell-special-made-from-rc-tech
GRIPS CZ SHADOW 2 long checker
Fits Cobra mags, Dawson mags, Trip mags and Metallform mags.
Precision cut with RC logo.
Also available are Magazin spring plates in brass.
adds weight(50grams) to bottom for faster reload
Magazine 1911, 9 Millimeter caliber, ten round, removable .500 polymer base pad, government grip length, flex follower, 12C .042 spring.
Toni system rib is the fastest targeting system in the world. Available for many shotgun models.
Magazine for Glock pistols and those who use Glock magazines.
Magazine Base Pad MaXXXGrip
NOT FOR MAGWELL USE
Fits in standard box for IPSC Matches.
Comes complete with the specially designed plate for easier assamble and disassembling the magazine.
We always have requests for an aggressive grip for the tactical members and weekend match goers. Something with a little bite. This is what we came up with, a big old nasty 5 dpi (diamond per inch) grip, made in G10. The Diamond Backs are by far the most aggressive grips we produce. We wouldn't recommend them for all day carry, but some do and swear by them.
These grips are a result of the success the VZ FRAG Pattern had in some of our 1911 grips. It only made sense to try it on the CZ 75, and it turned out really nice. They offer a nice medium texture that provides you with plenty of grip. The border on the edge of the grip gives you a nice smooth finish and really accents that VZ FRAG pattern well.
The evolution continues! The third offering in the Operator line of grips that we here at VZ started back 12 years ago. The Operator line is not only the best selling textured grip, but the most copied. Form follows function and beauty. With our new stippled texture offering it only made sense to wring out as much function by pairing it with the slants of the Operator series. Combining the two textures just like its predecessors in the series, it becomes a much more functional grip in the sense of allowing it to be used in more applications. From the concealed carry firearm to the tactical and tournament shooter it exceeds in all applications. Not least to mention its beauty that compliments any firearm.
These are the same basic design as the original Operators™, we just replaced the large aggressive checkering next to the front strap with an aggressive golfball pattern. We have also added a thumb recess for the magazine release. This is a very functional grip for the tournament shooter or those in the tactical high speed environment.
• TEXTURE: Very Aggressive • USE: Tactical, IPSC, IDPA, etc... • MATERIALS: G10, Micarta, Carbon Fiber
Add some “Electric Viking Deco Spirit” to your weapon with these Ragnarok or Walkure Grips from the Andrew Bawidamann Designer series. Original in design and easy to carry, these Grips are as Aesthetically pleasing as they are Functional.
• TEXTURE: Medium • USE: Carry, Tactical, Range, Competition • MATERIAL: G10, Carbon Fiber
These ship in sets of four in either stainless steel or blued steel for standard and slim line 1911 grips.
Tanfoglio GU-011 Aluminium grips for small frame 630.
Tanfoglio unica (unique in italian) is a parts and accessories line that offers the opportunity to customize tanfoglio pistols with originality and creativity. Unica products have high quality standards, durability and a daring colouring: they allow to increase shooting performance and to enrich the pistol with plays of colors.
Choose your color, choose your style, make your tanfoglio unique!
Fits for Tanfoglio Large frame
Does not work with magwell
FOR glock MAGAZINES
3 HOLES FINGER REST Left side Right shooter
Base pad ALU with plate Y3 Tanfoglio LF +1
NOT FOR MAGWELL!
With reserve plate.
Base pad ALU with plate Y2 Tanfoglio SMALL FRAME +1
- The +5/6 Base Pad comes with a +10% stronger spring.
- Overall weight 1.6oz.
- Length, 1 1/2 inch front side, 3/4 inch on back side.
- Will work on all full size double stacked GLOCKs.
- Patented proven push pin design.
- Super easy to attach and detach from the magazine.
- No specialty tools or devices required to disassemble.
- One piece design, no extra parts to possibly lose during disassembly.
- Fits the USPSA 140mm gauge.
- Ideal for full size magazines.
- Holds 20+1 rounds of 40S&W.
- Holds 23+1 rounds of 9mm.
- The added weight helps the magazine drop free easily for faster reloads.
- CNC machined from billet aluminum.
- Hard Anodized.
Taran Tactical Innovations Competition Magazine Well for 2011 provides the ultimate in reloading performance for your pistol. CNCd from Stainless Steal right here in America, our one-piece push pin design offers premium performance without the irritation of a two piece design. Forward ergonomic relief cuts provide comfort, while a rather large underside funnel to help increases the speed and success of quick reloads. 2.2 ounces of stainless steel provides weight for balance.
TTI Firepower PMAG Magazine Extension
- Designed to work with stock spring.
- Overall weight 2.1oz.
- Length, 1 inch.
- Patented, proven push-pin design.
- Easily attaches and detaches from the magazine.
- No specialty tools, devices, or additional springs required for assembly/disassembly, simply pop off the insert at the bottom of the spring and slide on the extension.
- One piece design; no small parts to keep track of.
- Minimal length addition to allow usage while in a prone position.
- Holds 35+1 rounds on the PMAG30.
- Holds 46+1 rounds on the PMAG40.
- The added weight helps the magazine drop free easier for faster reloads.
- Hard anodized.
TTI Firepower Base Pad Kit for GLOCK.
- Overall weight 0.8oz.
- Length, 1/2 inch.
- Works only on high-cap double stacked GLOCK OEM magazines.
- Holds 18+1 rounds of 40S&W.
- Holds 21+1 rounds of 9mm.
MBX "Mega" PCC 6" Competition Extension Basepad with MBX Custom Spring
Adds Maximum capacity up to 57 rounds
For Factory Glock 9mm and ETS Magazines only.
Includes: - MBX 6" Mega Extension Basepad - MBX 28 Coil Custom Spring
The Next Generation of High Performance Competition Ready Magazines for BUL SAS Styles.
Made from Heat Treated 410 Stainless for Ultimate Durability.
No spacer required for 9mm/.38 magazines.
MBX Complete Tubes were designed to be competition ready with exclusive features to meet the highest demands for today's shooters.
- All 126mm 9mm/.38 magazines hold 20-21 rounds.
- All 126mm .40/10mm magazines hold 18-19 rounds.
- All 141.25mm 9mm/.38 magazines hold 23-24 rounds.
- All 141.25mm .40/10mm magazines hold 20-21 rounds.
- All 171.25mm 9mm/.38 magazines hold 29-30 rounds.
*Our tubes are designed exclusively to work with MBX Basepads, Springs, and Followers. These tubes are not designed to work with other manufacturers components.
The tube is designed to work with the MBX Extreme Follower. This is a wider follower with new features that will allow for maximum reliability and capacity.
Witness holes on rear of tube to indicate round count for all tubes.
Choose between either our 16”and 18'' .223 Wylde or 11.5” 5.56 barrels
12 ga. Low Drag Follower, 12 ga. Low-Drag Follower for Benelli Nova/Super Nova and Vinci/Super Vinci
HARRIS BIPODS
The 7.62x51 NATO (.308 Winchester) PMAG 20 LR/SR GEN M3 is a lightweight, cost effective, high reliability magazine for SR25/M110 pattern rifles featuring true 20-round capacity, constant-curve body, anti-tilt follower, and snap on Impact/Dust Cover.
Designed specifically for SAAMI-spec ammunition, the PMAG 20 LR/SR is less than half the weight of standard issue steel magazines and maintains a service life round count approximately equal to the rifle barrel itself.
The PMAG 30 AK/AKM GEN M3 is a durable, lightweight, high reliability 30-round polymer magazine designed for Kalashnikov pattern rifles in 7.62x39mm (AK-47, AKM, AKS, SIG556R, and others.)
It features steel-reinforced locking lugs, removable floorplate, constant curve geometry, and a high-reliability/low-friction follower for the performance and military-grade durability you expect from a PMAG.
The MOE Stock – Mil-Spec Model (Magpul Original Equipment) is a drop-in replacement buttstock for AR15/M16 carbines using mil-spec sized receiver extension tubes. Designed for light, fast action the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation.
The Mil-Spec Model includes a standard 0.30" thick rubber butt-pad which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.
Similar in concept to the MOE-K, the MOE-K2 is a drop in upgrade for AR15/M4's that offers a more vertical grip angle, but in a full-size grip design. The steeper vertical grip angle is optimized for use on PDW (Personal Defense Weapon) configurations and improves comfort and control on short LOP rifles that bring the primary hand in closer to the shooter's body. With an aggressive TSP texture for positive weapon control, compatibility with optional Storage Cores for gear stowage, and a unique backstrap design for proper trigger finger placement, the K2 brings modern styling and ergonomics to the AR platform. All mounting hardware and a basic grip cap included.
Features
The M-LOK MVG is a light weight, inexpensive vertical foregrip that attaches directly to M-LOK compatible hand guards and forends with no additional Picatinny rails required. Made from the same high quality polymer as other Magpul products, the M-LOK MVG uses the new Magpul TSP texture for positive control in all environments.
With rounded contours and a shorter length, it has been optimized for use with the "thumb break method" of shooting and can also be used as a traditional vertical foregrip. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included.
The MOE+ Grip combines reinforced polymer body construction with comfortable, wrap-around rubber overmolding for maximum weapon control in adverse environments.
With a similar shape to a 'medium' sized MIAD, this AR15/M4 drop-in design features a hard-polymer bottom edge to reduce the possibility of equipment snags or grip damage. The MOE+ Grip accepts optional Storage Cores for gear stowage and includes a basic grip cap. All mounting hardware included.
The MOE Trigger Guard (Magpul Original Equipment) is an enhanced polymer drop in replacement for the AR15/M4 weapons platform. It features a shallow "V" shape for better use of gloves in tactical shooting or cold weather operations. The MOE Trigger Guard is non-folding, has rounded edges, and fills the annoying "gap" at the rear of the standard trigger guard. Also works well with most 7.62x51 AR platforms but some custom fitting may be required. All mounting hardware included.
TE AR15 GAS TUBE:
PISOL LENGHT,
CARBINE LENGHT,
MID LENGHT,
RIFLE LENGHT
Government size fully machined flat 20LPI Aluminium mainspring housing , Replaces the classic curved mainspring housing. Helps keep the gun from shifting in your hand during recoil
this MSH has a natural aluminium color finish
(pins and spring are not included )
- Provides better grip
- Fits all standard full size 1911
- Brand new , top quality
FEATURES
MBX "Fang" CTR & Hogue Stock Extensions
For installation on the Magpul model CTR, this extends the factory Butt Stock to allow for deeper and more stable contact with the shoulder pocket allowing for greater recoil control and added stability when reloading along with a raise stance when used in conjunction with the MBX off set mount.
9mm AR Enhanced Version
The 9mm Silent Captured Spring is a drop-in component that softens recoil and reduces cycling noise and vibration in your 9mm carbine. The result is a refined rifle that's a pleasure to shoot. Paired with our 9mm bolt assembly, you have the most reliable 9mm operating system available.
The 9mm Enhanced Version provides the same buffering mass as our standard 9mm SCS. At the same time, we've increased overall bolt mass slightly with more room for increased weight if needed. The result is even softer recoil thanks to a further delay in blowback.
The Enhanced Version 9mm SCS is the best option for reliability and durability with hotter ammunition. It's also the best pairing for use with non-JP bolt assemblies where a central mass needs to be removed. Removing this mass reduces overall reliability from the operating system, which can be offset by the addition weight in the SCS.
Package includes spring and instruction sheet.
Features:
GEN 2 AR-15 Silent Captured Spring Builder with Alternative Spring Pack
Standard Version
Includes SCS unit, five alternative weight springs and spacer to allow for installation in both carbine- and rifle-length buffer tubes.
The JPSCS2-15 will not function with older Primary Weapon Systems (PWS) bolt carriers. The design of the carrier will prevent the rifle from cycling.
Recoil Eliminators
Whether you're an practical rifle competitor, a varmint hunter, a member of a special military or police tactical team or just a plinker, sight recovery is the name of the game. Lower the recoil and you reduce muzzle flip, which leads to faster sight recovery and faster follow-up shots. Every compensator operates on this principle, but none can match the classic JP Recoil Eliminator. This design has been with us almost as long as JP has been in business. "Radical performance" was the goal then--it was the 90s, remember--and that still holds today with the Recoil Eliminator still providing the fastest possible sight recovery and the highest level of recoil reduction of any device on the market, including our own line of compensators.
Functional above all else, the brake's broad baffle surfaces redirect the vast majority of muzzle gases out to the sides with each shot. This actually drives the rifle forward during fire, counteracting the rearward recoil impulse for both minimized overall movement and muzzle flip coupled with reduced fatigue from constant fire, particularly with large-bore rifles. The JPRE also shapes these gases so as to spare the shooter from any concussion as well as the annoyance of thrown dust when shooting off a bipod.
A better shooting experience in every way; that's what the Recoil Eliminator delivers. Over two decades of reviews and match wins tell the tale.
Created as an evolution of the original MOE 1911 Grip Panels, the 1911 Grip Panels with TSP texture offers the user a more aggressive texture allowing for better control of the weapon in all environments.Constructed of heavy-duty reinforced polymer, the grips have a unique diamond-shaped cross section to prevent twisting in the hand, an aggressive magazine release cut-out, aggressive TSP texture (Trapezoidal Surface Projections) for positive control, and are compatible with ambidextrous safeties. The grips are designed to fit full size framed 1911s with standard grip screw bushings.
his package contains () mag springs, 11 and 13 coils long, designed to fit a ''Grams Format'' follower. They are a replacement spring for any of the Grams ''Follower Kits''.
All of the functional requirements are met while keeping the weight under 6 ounces. This stock adapts and changes to your environment or operational needs by utilizing custom accessory mounts and accepts a new optimized sling configuration. The lightest stock of its kind in the market.
? Slide-on replacement for collapsible butt stock? Angled non-slip rubberized buttpad allows faster presentation, even with body armor? Multiple Sling Slots with single point mounting? Quick Detach Sling mounting point is positioned for optimum usage including ambidextrous shooters? Upper section provides enhanced cheek weld? MilSpec Buffer Tube Spec
Mil Spec size 1.148 diameter receiver extensions (buffer tube)
Weight: 5.8oz
Height: 5.22"
Width: 1.752"
Length: 7.084"
Commercial spec size 1.17 diameter receiver extenstions (buffer tubes)
This easy to install, inexpensive, drop in upgrade is perfect for any AR rifle. CNC machined from a solid piece of 6061-T6 aluminum, the Billet Mag Release Button is larger and easier to manipulate than the Mil-Spec version. A diamond texture face and a blind threaded hole keep the lines clean and give it unique styling.
do not fit Benelli
NOTE : without shue, you can choose you insert:
https://cesar-shop.com/product/trigger-shoe
insert for trigger 1911 and 2011
The TTI Base Pad for STI, SV, SPS, & Rescomp Magazine Tubes.
Use the TTI Base Pad with the TTI spring and TTI Follower for maximum capacity.
- Available in 3mm, 4mm, and 7mm.
- 3mm for SV/SPS/Rescomp 140/170mm magazines.
- Rescomp 21rds in 140mm 40S&W
- 23rds in 140mm 38/9mm.
- 29-30rds in 170mm 38/9mm
- Weighs .3 oz
MAGWELL for Shadow 2
Speeding up your magazine insertion is one of the things to beat the competition. Also the grip with the Magwell feels beter. About the grips , they indeed need to be the short ones.
Here you find the short grips.