PCC specific parts

Ace's skeletonized stock for the AR-15 rifle. Closed cell foam overtube provides an extremely comfortable cheek weld. Uses A2 buffer tube, rifle length buffer and rifle length buffer spring (NOT INCLUDED). Foam overtube, buttpad and all needed mounting hardware included. Length 10" Weight 11.2oz

MBX 9mm PCC Compensator "Patent Pending" Designed specifically for competition shooting to achieve the best performance possible with lowering gas volume on Pistol Caliber Carbine.

Original Glock magazines for Glock pistols and other firearms that use Glock-type magazines.

Glock 19X magazines are COYOTE color variants of Standard Gen4 Glock mags (G17, G17L, G19, G26, G34, G43, G45).

Bul Armory PCC Magwell for Bul Armory PCC rifle.

The all-new NCT3 compensator, designed to eliminate recoil and muzzle climb while being tailored to your exact requirements. Available for .223 or 9mm bore diameters.

The hydraulic shock absorber (Buffer) is specially designed for all PCC rifles that operate on the principle of unlocked bolt. In combination with the right spring, it enables the elimination of unpleasant recoil that most PCC AR rifles are known to have. 

15 degree angle improves comfort and control. Texture provides a positive grip surface with wet or gloved hands A combination of fit and function unparalleled by the originally supplied M16/AR15/M4/HK416 pistol grip.

The Marksman Performance Choice Trigger is a single stage, drop-in trigger – now available for pistol caliber carbines! Our 9mm/ PCC trigger is a drop-in trigger for any standard AR-15 style pistol caliber carbine as well as the Sig Sauer MPX PCC. Perfect for the competition shooter and designed to give you more customization options and improve your finger’s position on the trigger, Our MPC 9mm/PCC trigger shoe is 3/8” wide rather than the standard 1/4” width of a standard trigger. This gives it a greater tactile feel and together with our MPC Series’ Sentinel Trigger Guard it’s an unbeatable combination that performs like no other. The Velocity PCC Trigger comes in 4lb pull weight only.

This Caa Micro Conversion Kit is a lightweight and sturdy platform for Glock handguns, turning it into the ultimate Glock Conversion Kit. It has a barrel shroud made of aluminum with a polymer body. CAA Glock Pistol to Carbine Stock next generation of conversion kits from caa usa mck micro conversion kit available for gen 3, 4, and 5 glock models

• SIG MPX TRIGGER

The Timney replacement trigger for the Sig Sauer MPX is the latest in the Timney lineage of semi-automatic, replacement triggers.  Timney collaborated directly with SIG on the design and features of the MPX drop in replacement trigger. 

The trigger, hammer, and bridge are constructed of heat-treated steel.  The housing is machined from 6061 T6 anodized alloy and the trigger is heat treated steel and coated with black oxide .

The trigger is single stage and features a straight blade. The Timney replacement trigger for the SIG MPX is a self-contained, 100% drop-in trigger ready to install in your rifle for an exceptionally smooth, crisp, trigger pull with no gunsmithing, fitting, or adjusting required.

The MPX replacement from Timney features a hardened steel bridge to protect the trigger components from the vigorous bolt blow back characteristics prominent in Pistol Caliber Carbines. 

The single stage trigger features a non adjustable trigger pull weight of 4.5 pounds. Drop in installation is simple once the Factory trigger is removed, you will reuse the factory Hammer and Trigger pins.

Set screws are located in the housing to lock the trigger in place and prevent the pins from walking out of place. 

The Timney drop in MPX trigger works with the factory safety as well as many aftermarket replacements, especially the Timney 49r ambidextrous, short throw safety available here on the website. 

MBX "Fang" CTR & Hogue Stock Extensions

A 5 piece Delron stroker kit consisting of a long and medium main contact shim & stack shims .100-.200-.300 to allow multiple combinations of stroke length allowing you to tune your preference in trigger load and cycle speed. For 9mm AR

The 9mm Silent Captured Spring is a drop-in component that softens recoil and reduces cycling noise and vibration in your 9mm carbine. The result is a refined rifle that's a pleasure to shoot. Paired with our 9mm bolt assembly, you have the most reliable 9mm operating system available. The 9mm Enhanced Version provides the same buffering mass as our standard 9mm SCS. At the same time, we've increased overall bolt mass slightly with more room for increased weight if needed. The result is even softer recoil thanks to a further delay in blowback.

Nordic Components, The M-LOK QD Sling Mount Provides a Forward Attachment Point For a Push-Button QD Sling, Machined From Milspec Anodized Aluminum, The Low-Profile M-LOK QD Sling Mount Features Beveled Edges to Reduce Snagging and Has an Anti-Rotation Design That Prevents Swivels From Spinning, All Hardware Necessary for Attachment Directly to M-LOK Slots is Included

Freshly made base pad for Glock features a tight grip and deep side grooves which make sure your handling is swift and precise. It adds the extra needed surface area for one-handed manipulation. Magazine base pad fits into the original Glock magazine notches.

This stock uses Ace original soft foam overtube for the ultimate cheek weld. A billet machined gusset reinforces the receiver extension tube at its weakest point directly behind the receiver. Precision machined aluminum butt clamps directly to the RET and provides a machined in sling mount.

YELLOW Carbine Spring recommended for most Standard Applications min 115 Power Factor up to 145 Power Factor.

Magpul M-LOK QD Sling Mount provides a forward attachment point for the Magpul MS4 Sling and other push-button QD slings. 

DESCRIPTION

Designed for the Ultimate In AR Performance

• HIPERFIRE®’s Most Popular Trigger
• Virtually No Take-Up/Pre-Travel, Very Smooth
• Cam-Over Toggle Engine™
  • Very Hard-Hitting Hammer
  • Soft-Start Lock-Up™ for Pre-Ignition Stability
  • You-Adjust Pull Weights of 2½ and 3½ lbs.

ELF AR-9 Match Trigger 

Product Description

• Fits any mil-spec AR Platform 
• Compatible with Sig MPX which was used extensively in development
• Absolutely Drop-Safe regardless of pull-weight
•  Factory set Pull-weight is approximately 50% lighter than that of a standard AR platform trigger, providing a great combination of speed and accuracy
• Adjustable from 4lbs to 2 3/4lbs without removing from lower
•  Full power hammer spring ensures proper ignition of primer
• Very short pull and reset allows for rapid follow up shots and greater accuracy
•  Sturdy trigger assembly designed for rugged, trouble-free use; Made of lightweight aircraft-grade aluminum and hardened steel
• Unique design of disconnect allows full 1/4” width eliminating possibility of wear and double-firing
• High performance trigger and hammer sealed bearings for smoother and faster firing
• Unique features include captured disconnector eliminating any possible double fires and anti trigger-slap geometry greatly enhancing live fire.
•  100% made in America with a Lifetime Guarantee!

Kopito za puške MOE (Magpul Original Equipment) je nadomestek za puške AR15/M16 A1 in A2, ki uporablja Rifle lenght dolžino buffer tube. Zasnovano kot osnovna nadgradnja ima vgrajeno 1,25-palčno zanko za nosilni jermen, dvostranske sprednje in zadnje pritrdilne točke QD, zamenljivo protizdrsno gumirano podlogo in notranji predal za shranjevanje, dostopen skozi zadnjo stran kopita.

CMMG’s 9 AR Conversion makes it possible to shoot 9mm ammunition from your unmodified AR15 lower receiver when paired with a CMMG 9mm Radial Delayed Blowback upper.

High Quality Spare PCC AR Platform Firing pin spring RC-tech

CMMG’s 9 AR Conversion makes it possible to shoot 9mm ammunition from your unmodified AR15 lower receiver when paired with a CMMG 9mm Radial Delayed Blowback upper.

The Velocity Triggers VMR Magazine Release improves the ease of access and the tactile feel of your rifle’s magazine release.

MBX competition follower for Bul/Para type magazine. Competition folower does not have Slide Stop.

T-Arms Long+Short combination ambi selector lever is perfect for any AR15/PCC rifle.

Easy instalation with 90° or 45° operation. 

Black comes with an extra Medium lever.

Eemann Tech extractor for ADC PCC AR-9 rifles and their clones.

COMPATIBLE WITH: ADC PCC, Bul PCC, Troy PCC, Others

Lightweight but incredibly strong, our PMAG D-50 MP is a highly reliable, 9x19mm Parabellum, 50-round drum magazine for CZ Scorpion EVO pistol caliber carbines. Providing 50-round capacity, the unique drum configuration keeps the height of the magazine manageable, allowing for prone firing and easier storage. For easy loading, it includes a ratcheting loading lever that removes tension from the internal spring

A Combination of MBX Buffer Tuning/Rebuild Kit and MBX Adjustable 5 Piece Short Stroke Kit for the Ultimate in Performance Preference.

 HIPERFIRE PDI Trigger

MBX competition follower for STI/SVI/SPS type magazine. Competition folower does not activate Slide Stop.

Lightning-Fast Mag Changes.Made from super slippery, super durable, Acetyl Delrin.

Lightweight but incredibly strong, our PMAG D-50 MP is a highly reliable, 9x19mm Parabellum, 50-round drum magazine for HK94/MP5 large-format pistols and pistol caliber carbines. Providing 50-round capacity, the unique drum configuration keeps the height of the magazine manageable, allowing for prone firing and easier storage.

M-LOK Type 2 Rail Covers are low-profile, two-piece covers that install directly onto most M-LOK aluminum hand guards (non-polymer). This pack of six M-LOK covers is non-orientation specific, which allows the user to mount them in any direction desired without affecting function. Not compatible with MAGPUL MOE M-LOK, MOE SL and SGA forends, and may not be compatible with free-float hand guards that have a wider and flatter profile, as they will not seat deep enough to allow the center portion to lock in.

Designed for use with 1913 Picatinny railed hand guards, the RVG is a basic, light weight, cost-effective vertical fore grip. Shape is ergonomically designed for use as a traditional vertical grip. It has also been optimized for use with the "thumb break method" of shooting.