PCC Gewehrteile

The all-new NCT3 compensator, designed to eliminate recoil and muzzle climb while being tailored to your exact requirements.  Available for .223 or 9mm bore diameters.

Product Details

The MOE Rifle Stock (Magpul Original Equipment) is a drop-in replacement for AR15/M16 A1 and A2 rifle stocks utilizing the standard rifle-length receiver extension (buffer tube).

Designed as a basic upgrade, the stock features integral 1.25" sling loop, optional dual-side front and rear QD mounting points, replaceable anti-slip rubberized butt-pad, and internal storage compartment accessible through the rear storage door.

Made in U.S.A.

Nordic Components, The M-LOK QD Sling Mount Provides a Forward Attachment Point For a Push-Button QD Sling, Machined From Milspec Anodized Aluminum, The Low-Profile M-LOK QD Sling Mount Features Beveled Edges to Reduce Snagging and Has an Anti-Rotation Design That Prevents Swivels From Spinning, All Hardware Necessary for Attachment Directly to M-LOK Slots is Included

• SIG MPX TRIGGER

The Timney replacement trigger for the Sig Sauer MPX is the latest in the Timney lineage of semi-automatic, replacement triggers.  Timney collaborated directly with SIG on the design and features of the MPX drop in replacement trigger. 

The trigger, hammer, and bridge are constructed of heat-treated steel.  The housing is machined from 6061 T6 anodized alloy and the trigger is heat treated steel and coated with black oxide .

The trigger is single stage and features a straight blade. The Timney replacement trigger for the SIG MPX is a self-contained, 100% drop-in trigger ready to install in your rifle for an exceptionally smooth, crisp, trigger pull with no gunsmithing, fitting, or adjusting required.

The MPX replacement from Timney features a hardened steel bridge to protect the trigger components from the vigorous bolt blow back characteristics prominent in Pistol Caliber Carbines. 

The single stage trigger features a non adjustable trigger pull weight of 4.5 pounds. Drop in installation is simple once the Factory trigger is removed, you will reuse the factory Hammer and Trigger pins.

Set screws are located in the housing to lock the trigger in place and prevent the pins from walking out of place. 

The Timney drop in MPX trigger works with the factory safety as well as many aftermarket replacements, especially the Timney 49r ambidextrous, short throw safety available here on the website. 

The MBX "Patent Pending" Buffer is Designed specifically for Pistol Carbine Caliber. 

Features an Internal Spring captured within the Buffer to allow for the Buffer/Bolt speed to be significantly reduced during the cycling of the Firearm, resulting in an Extreme Reduction with Felt Recoil.

- Buffer weight 6.8 ozs - Overall length 4.9 inches - Made from Stainless Steel - Includes internal .062 recoil reduction spring - Captured Pin Design to ensure reliability and Performance

2 Adjustable Stoke Lengths: - 1.400 Stroke Long - .900 Stroke Short

In the MBX Buffer tube these parts move at the same velocity as the bolt and run much smoother and silent with a little oil. - Oil the MBX Buffer inside and out - Wipe the main Buffer spring with an oily cloth to add lubrication to the spring - Any medium to light weigh oil is good

Please see recommendations for matching Springs

YELLOW Carbine Spring recommended for most Standard Applications min 115 Power Factor up to 145 Power Factor.

WHITE Carbine Extra Long Spring recommended for 140 Power Factor and Above.

MBX 9mm PCC Compensator "Patent pending"

Designed specifically for competition shooting to achieve the best performance possible with the lower gas volume Pistol Caliber Rifle.

Extra tall port design along with offset side semi circle design for increased surface area. Resulting in highly efficient gas redirection which creates improved downforce and greater stability for the ultimate in dot tracking and follow up shots.

- 20 Deg rear slope port configuration increases compensator forward brake motion to aid in felt recoil.

- Made from T6 aluminum, hard anodized for light weight and durability.

- Includes threaded lock nut for easy installation and 6/32 tapped set screw to aid in installation or pinning if required.

- 3" overall length, .875 wide & 1 1/4" tall

- Available threads: 1/2 x 28 & 1/2 x 36

- Weight: 2.4oz

Kit includes: 
- Spring Buffer Pad 
- Custom Buffer Pin 
- Set Screw 
- Allen Wrench 
- 3 Springs: 
   "Red" Standard Power .062
   "Green" Reduced Power .055
   "Blue" Lightest Power .047

Please see recommendations for matching Springs

YELLOW Carbine Spring recommended for most Standard Applications min 115 Power Factor up to 145 Power Factor.

WHITE Carbine Extra Long Spring recommended for 140 Power Factor and Above.

ELF AR-9 Match Trigger 

Product Description

• Fits any mil-spec AR Platform 
• Compatible with Sig MPX which was used extensively in development
• Absolutely Drop-Safe regardless of pull-weight
•  Factory set Pull-weight is approximately 50% lighter than that of a standard AR platform trigger, providing a great combination of speed and accuracy
• Adjustable from 4lbs to 2 3/4lbs without removing from lower
•  Full power hammer spring ensures proper ignition of primer
• Very short pull and reset allows for rapid follow up shots and greater accuracy
•  Sturdy trigger assembly designed for rugged, trouble-free use; Made of lightweight aircraft-grade aluminum and hardened steel
• Unique design of disconnect allows full 1/4” width eliminating possibility of wear and double-firing
• High performance trigger and hammer sealed bearings for smoother and faster firing
• Unique features include captured disconnector eliminating any possible double fires and anti trigger-slap geometry greatly enhancing live fire.
•  100% made in America with a Lifetime Guarantee!

Ace's skeletonized stock for the AR-15 rifle. Closed cell foam overtube provides an extremely comfortable cheek weld. Uses A2 buffer tube, rifle length buffer and rifle length buffer spring (NOT INCLUDED). Foam overtube, buttpad and all needed mounting hardware included. Length 10" Weight 11.2oz

Note: Comes only with ARFX Stock and Foam Overtube.  Does not include A2 Extension Tube, Rifle Buffer, Or Rifle Buffer Spring.

This stock uses Ace?s original soft foam overtube for the ultimate cheek weld. A billet machined gusset reinforces the receiver extension tube at its weakest point directly behind the receiver. Precision machined aluminum butt clamps directly to the RET and provides a machined in sling mount.

Note: Comes only with ARFX Stock and Foam Overtube.  Does not include A2 Extension Tube, Rifle Buffer, Or Rifle Buffer Spring.

The Marksman Performance Choice Trigger is a single stage, drop-in trigger – now available for pistol caliber carbines! Our 9mm/ PCC trigger is a drop-in trigger for any standard AR-15 style pistol caliber carbine as well as the Sig Sauer MPX PCC. Perfect for the competition shooter and designed to give you more customization options and improve your finger’s position on the trigger, Our MPC 9mm/PCC trigger shoe is 3/8” wide rather than the standard 1/4” width of a standard trigger. This gives it a greater tactile feel and together with our MPC Series’ Sentinel Trigger Guard it’s an unbeatable combination that performs like no other. The Velocity PCC Trigger comes in 4lb pull weight only.

A 5 piece Delron stroker kit consisting of a long and medium main contact shim & stack shims .100-.200-.300 to allow multiple combinations of stroke length allowing you to tune your preference in trigger load and cycle speed. For 9mm AR

High Quality Spare PCC AR Platform Firing pin spring RC Tech

Magazine for Glock pistols and those who use Glock magazines.

MBX "Fang" CTR & Hogue Stock Extensions

For installation on the Magpul model CTR, this extends the factory Butt Stock to allow for deeper and more stable contact with the shoulder pocket allowing for greater recoil control and added stability when reloading along with a raise stance when used in conjunction with the MBX off set mount.

9mm AR Enhanced Version

The 9mm Silent Captured Spring is a drop-in component that softens recoil and reduces cycling noise and vibration in your 9mm carbine. The result is a refined rifle that's a pleasure to shoot. Paired with our 9mm bolt assembly, you have the most reliable 9mm operating system available.

The 9mm Enhanced Version provides the same buffering mass as our standard 9mm SCS. At the same time, we've increased overall bolt mass slightly with more room for increased weight if needed. The result is even softer recoil thanks to a further delay in blowback.

The Enhanced Version 9mm SCS is the best option for reliability and durability with hotter ammunition. It's also the best pairing for use with non-JP bolt assemblies where a central mass needs to be removed. Removing this mass reduces overall reliability from the operating system, which can be offset by the addition weight in the SCS.

Package includes spring and instruction sheet.

Features:

• Simple, drop-in installation
• Quieter, smoother operation thanks to reduced vibration and friction
• Softened recoil, both felt and actual
• Completes the roller-bearing-like perfection of the JP operating system
• Sufficient deadblow effect to avoid bolt bounce
• Mass tunable via alternate masses
• Enhanced reliability and durability when shooting hotter loads
• Best SCS option for use with non-JP 9mm bolt assemblies

New design Glock base pad. New features is a tight grip and deep side grooves that makes sure your handling is swift and precise, it adds the extra needed support for one-handed manipulation. Magazine base pad fits into the original Glock magazine notches.

Magazine pad is precisely-engineered in our factory and features easy disassembly and assembly without any tools required. Finger grip will make sure that you will get the best out of the product even when using both hands.

Base pads will add additional 2 rounds to your Glock magazine.

They come in 5 colors – Black, Red, Blue, Gold and Silver.

Made in Europe from a solid piece of finest aircraft grade aluminium.