Select your country
Please select your country
Cart is empty
No items found matching the search criteria
High Quality Spare PCC AR Platform Firing pin spring RC-tech
Eemann Tech Disconnector Spring for CZ Scorpion EVO 3. Reduced-power springs provide lighter trigger pull for improved accuracy in competition shooting.
The M-LOK T-Nut Replacement Set is a replacement hardware pack designed for use with all M-LOK accessories. Made of 4140 Chromoly Steel with a Mil-Spec Manganese Phosphate finish, the hardware set is supplied with two T-Nuts as well as two different length button-head cap screws to ensure compatibility with various hand guard or forend thicknesses.
The Heat-Treated Castle Nut screws onto the AR15/M4 lower receiver extension (buffer tube) and keeps the receiver extension and lower receiver end plate secured in place. The large notches allow for positive engagement with a castle nut wrench for proper installation and torque. The smaller notches provide a location for the end user to stake the castle nut to prevent accidental loosening.
Finished in a Mil-spec manganese phosphate.
Eemann Tech extractor for ADC PCC AR-9 rifles and their clones.
COMPATIBLE WITH: ADC PCC, Bul PCC, Troy PCC, Others
Designed for use with all M-LOK compatible hand guards and forends, our 11-slot M-LOK Polymer Rail Sections provide a cost effective method of attaching various 1913 Picatinny-Spec rail-mounted accessories such as lights, vertical grips, etc. Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight, our M-LOK Polymer Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges.
MBX competition follower for Bul/Para type magazine. Competition folower does not have Slide Stop.
MBX competition follower for STI/SVI/SPS type magazine. Competition folower does not activate Slide Stop.
M-LOK Type 2 Rail Covers are low-profile, two-piece covers that install directly onto most M-LOK aluminum hand guards (non-polymer). This pack of six M-LOK covers is non-orientation specific, which allows the user to mount them in any direction desired without affecting function. Not compatible with MAGPUL MOE M-LOK, MOE SL and SGA forends, and may not be compatible with free-float hand guards that have a wider and flatter profile, as they will not seat deep enough to allow the center portion to lock in.
Sig MPX Magazine Base Pad increases original magazines capacity by 5 extra rounds. Made from super durable solid Nylon, it adds gripping surface and more solid grip. Installed in seconds and without use of tools.
Freshly made base pad for Glock features a tight grip and deep side grooves which make sure your handling is swift and precise. It adds the extra needed surface area for one-handed manipulation. Magazine base pad fits into the original Glock magazine notches.
15 degree angle improves comfort and control. Texture provides a positive grip surface with wet or gloved hands A combination of fit and function unparalleled by the originally supplied M16/AR15/M4/HK416 pistol grip.
Nordic Components, The M-LOK QD Sling Mount Provides a Forward Attachment Point For a Push-Button QD Sling, Machined From Milspec Anodized Aluminum, The Low-Profile M-LOK QD Sling Mount Features Beveled Edges to Reduce Snagging and Has an Anti-Rotation Design That Prevents Swivels From Spinning, All Hardware Necessary for Attachment Directly to M-LOK Slots is Included
YELLOW Carbine Spring recommended for most Standard Applications min 115 Power Factor up to 145 Power Factor.
A 5 piece Delron stroker kit consisting of a long and medium main contact shim & stack shims .100-.200-.300 to allow multiple combinations of stroke length allowing you to tune your preference in trigger load and cycle speed. For 9mm AR
Designed for use with 1913 Picatinny railed hand guards, the RVG is a basic, light weight, cost-effective vertical fore grip. Shape is ergonomically designed for use as a traditional vertical grip. It has also been optimized for use with the "thumb break method" of shooting.
The Magpul M-LOK Bipod Mount allows for the attachment of most Harris®-style stud mounted bipods to M-LOK compatible hand guards and forends. The M-LOK Bipod Mount offers a low-profile, robust, and elegant mounting solution for the most common bipods on the market. By utilizing the direct-connect properties of the M-LOK system, the bipod sits closer to the mounting surface than other adapters while providing superior support to the bipod for strength and stability.
Magpul M-LOK QD Sling Mount provides a forward attachment point for the Magpul MS4 Sling and other push-button QD slings.
The Velocity Triggers VMR Magazine Release improves the ease of access and the tactile feel of your rifle’s magazine release.
Original Glock magazines for Glock pistols and other firearms that use Glock-type magazines.
Glock 19X magazines are COYOTE color variants of Standard Gen4 Glock mags (G17, G17L, G19, G26, G34, G43, G45).
CMMG’s 9 AR Conversion makes it possible to shoot 9mm ammunition from your unmodified AR15 lower receiver when paired with a CMMG 9mm Radial Delayed Blowback upper.
Oversized Magwell for ADC PCC rifles. 3D printed and designed to make your reloads as fast as possible when they really count.
A Combination of MBX Buffer Tuning/Rebuild Kit and MBX Adjustable 5 Piece Short Stroke Kit for the Ultimate in Performance Preference.
MBX "Fang" CTR & Hogue Stock Extensions
T-Arms Long+Short combination ambi selector lever is perfect for any AR15/PCC rifle.
Easy instalation with 90° or 45° operation.
Black comes with an extra Medium lever.
A drop-in replacement buttstock for AR15/M4 Mil-Spec carbine buffer tubes, the SL-K is designed for compact PDW style weapons or users desiring a small and light stock. Features a shorter and slimmer profile, a smaller rubber butt-pad with rolled toe for easy shouldering and sure grip, and a 1.25" footman's loop with the ability to accept an optional M-LOK QD Sling Mount for push-button style QD sling swivels.
The Magpul SL Hand Guard for the HK94/MP5 is a high-strength, injection-molded polymer handguard solution that provides the user with improved ergonomics and anti-slip texturing. It also includes M-LOK® compatible slots that allow mounting of modern accessories. Designed for the HK94/MP5 and their clones, it provides increased utility and enhanced control of the firearm.
Barrel shroud for CX4 (2° series) 9mm.
PCC upper parts
PCC lower parts
Handguards, rails and mounts
Muzzle devices
PCC stocks & grips
Triggers and springs
PCC bolt small parts & recoil systems
PCC Magazines and parts
PCC other
