Select your country
Please select your country
Cart is empty
No items found matching the search criteria
ADCs special 12" round competition handguard for PCC rifles, is designed to be as low-profile as possible, to enable fast and controlled shooting. Specially designed for PCC rifles that are designed on AR platform.
The M5 Plus handguard is 100% made in Italy, CNC machined, it was designed primarily to maximize the particular design that features the ADC carbines, allowing compatibility with other AR platforms. It is characterized by a free-float design an octagonal profile with full size picatinny. It uses the M-LOK system for attaching further accessories.
Oversized Magwell for ADC PCC rifles. 3D printed and designed to make your reloads as fast as possible when they really count.
Freshly made base pad for Glock features a tight grip and deep side grooves which make sure your handling is swift and precise. It adds the extra needed surface area for one-handed manipulation. Magazine base pad fits into the original Glock magazine notches.
Armanov Equalizer Compensator / muzzle brake was designed from the ground up by studying gas flow of the low pressure 9 mm pistol caliber. Three chambers are designed to catch as much gasses as possible and divert them upwards and at the same time reduce felt recoil. The result are faster follow-up shots in smaller groups and less overall movement of the firearm.
Sig MPX Magazine Base Pad increases original magazines capacity by 5 extra rounds. Made from super durable solid Nylon, it adds gripping surface and more solid grip. Installed in seconds and without use of tools.
Bul Armory PCC Magwell for Bul Armory PCC rifle.
This Caa Micro Conversion Kit is a lightweight and sturdy platform for Glock handguns, turning it into the ultimate Glock Conversion Kit. It has a barrel shroud made of aluminum with a polymer body. CAA Glock Pistol to Carbine Stock next generation of conversion kits from caa usa mck micro conversion kit available for gen 3, 4, and 5 glock models
CMMG’s 9 AR Conversion makes it possible to shoot 9mm ammunition from your unmodified AR15 lower receiver when paired with a CMMG 9mm Radial Delayed Blowback upper.
Ace's skeletonized stock for the AR-15 rifle. Closed cell foam overtube provides an extremely comfortable cheek weld. Uses A2 buffer tube, rifle length buffer and rifle length buffer spring (NOT INCLUDED). Foam overtube, buttpad and all needed mounting hardware included. Length 10" Weight 11.2oz
This stock uses Ace original soft foam overtube for the ultimate cheek weld. A billet machined gusset reinforces the receiver extension tube at its weakest point directly behind the receiver. Precision machined aluminum butt clamps directly to the RET and provides a machined in sling mount.
Eemann Tech Disconnector Spring for CZ Scorpion EVO 3. Reduced-power springs provide lighter trigger pull for improved accuracy in competition shooting.
Eemann Tech extractor for ADC PCC AR-9 rifles and their clones.
COMPATIBLE WITH: ADC PCC, Bul PCC, Troy PCC, Others
ELF AR-9 Match Trigger
Product Description
Original Glock magazines for Glock pistols and other firearms that use Glock-type magazines.
Glock 19X magazines are COYOTE color variants of Standard Gen4 Glock mags (G17, G17L, G19, G26, G34, G43, G45).
HIPERFIRE PDI Trigger
The 9mm Silent Captured Spring is a drop-in component that softens recoil and reduces cycling noise and vibration in your 9mm carbine. The result is a refined rifle that's a pleasure to shoot. Paired with our 9mm bolt assembly, you have the most reliable 9mm operating system available. The 9mm Enhanced Version provides the same buffering mass as our standard 9mm SCS. At the same time, we've increased overall bolt mass slightly with more room for increased weight if needed. The result is even softer recoil thanks to a further delay in blowback.
The Heat-Treated Castle Nut screws onto the AR15/M4 lower receiver extension (buffer tube) and keeps the receiver extension and lower receiver end plate secured in place. The large notches allow for positive engagement with a castle nut wrench for proper installation and torque. The smaller notches provide a location for the end user to stake the castle nut to prevent accidental loosening.
Finished in a Mil-spec manganese phosphate.
The Magpul M-LOK Bipod Mount allows for the attachment of most Harris®-style stud mounted bipods to M-LOK compatible hand guards and forends. The M-LOK Bipod Mount offers a low-profile, robust, and elegant mounting solution for the most common bipods on the market. By utilizing the direct-connect properties of the M-LOK system, the bipod sits closer to the mounting surface than other adapters while providing superior support to the bipod for strength and stability.
Designed for use with all M-LOK compatible hand guards and forends, our 11-slot M-LOK Polymer Rail Sections provide a cost effective method of attaching various 1913 Picatinny-Spec rail-mounted accessories such as lights, vertical grips, etc. Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight, our M-LOK Polymer Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges.
Magpul M-LOK QD Sling Mount provides a forward attachment point for the Magpul MS4 Sling and other push-button QD slings.
The M-LOK T-Nut Replacement Set is a replacement hardware pack designed for use with all M-LOK accessories. Made of 4140 Chromoly Steel with a Mil-Spec Manganese Phosphate finish, the hardware set is supplied with two T-Nuts as well as two different length button-head cap screws to ensure compatibility with various hand guard or forend thicknesses.
Kopito za puške MOE (Magpul Original Equipment) je nadomestek za puške AR15/M16 A1 in A2, ki uporablja Rifle lenght dolžino buffer tube. Zasnovano kot osnovna nadgradnja ima vgrajeno 1,25-palčno zanko za nosilni jermen, dvostranske sprednje in zadnje pritrdilne točke QD, zamenljivo protizdrsno gumirano podlogo in notranji predal za shranjevanje, dostopen skozi zadnjo stran kopita.
The MOE SL Stock– Commercial-Spec Model (MOE Slim Line) is a drop-in replacement buttstock for AR15/M4 carbines using Commercial-Spec sized receiver extension tubes. Designed for the modern battlefield, the sleek profile, dual-side release latches, rolled toe, and angled rubber butt-pad are optimized for use with body armor or modular gear and provides for efficient shoulder transitions.
A drop-in replacement buttstock for AR15/M4 Mil-Spec carbine buffer tubes, the SL-K is designed for compact PDW style weapons or users desiring a small and light stock. Features a shorter and slimmer profile, a smaller rubber butt-pad with rolled toe for easy shouldering and sure grip, and a 1.25" footman's loop with the ability to accept an optional M-LOK QD Sling Mount for push-button style QD sling swivels.
The storage-capable version of the flagship Magpul MOE SL® carbine stock, the MOE SL-S (Storage) Carbine Stock - Mil-Spec is a direct replacement buttstock for AR15/M4 carbines. The sleek profile, dual-side release latches, and waterproof battery tubes make it the slimmest storage tube stock available. The SL-S provides an enhanced cheek weld and true, O-ring sealed, 10m waterproof storage area desired by many, but fits it into the narrowest package possible to allow a more upright head position and minimize bulk.
Lightweight but incredibly strong, our PMAG D-50 MP is a highly reliable, 9x19mm Parabellum, 50-round drum magazine for CZ Scorpion EVO pistol caliber carbines. Providing 50-round capacity, the unique drum configuration keeps the height of the magazine manageable, allowing for prone firing and easier storage. For easy loading, it includes a ratcheting loading lever that removes tension from the internal spring
Lightweight but incredibly strong, our PMAG D-50 MP is a highly reliable, 9x19mm Parabellum, 50-round drum magazine for HK94/MP5 large-format pistols and pistol caliber carbines. Providing 50-round capacity, the unique drum configuration keeps the height of the magazine manageable, allowing for prone firing and easier storage.
M-LOK Type 2 Rail Covers are low-profile, two-piece covers that install directly onto most M-LOK aluminum hand guards (non-polymer). This pack of six M-LOK covers is non-orientation specific, which allows the user to mount them in any direction desired without affecting function. Not compatible with MAGPUL MOE M-LOK, MOE SL and SGA forends, and may not be compatible with free-float hand guards that have a wider and flatter profile, as they will not seat deep enough to allow the center portion to lock in.
Designed for use with 1913 Picatinny railed hand guards, the RVG is a basic, light weight, cost-effective vertical fore grip. Shape is ergonomically designed for use as a traditional vertical grip. It has also been optimized for use with the "thumb break method" of shooting.
The Magpul SL Hand Guard for the HK94/MP5 is a high-strength, injection-molded polymer handguard solution that provides the user with improved ergonomics and anti-slip texturing. It also includes M-LOK® compatible slots that allow mounting of modern accessories. Designed for the HK94/MP5 and their clones, it provides increased utility and enhanced control of the firearm.