Pistol parts

 RC Tech Spring Set for Lighter Trigger Pull is a three spring kit that in combination make CZ 75 pistol models with a barrel length of 4 inch or longer a competition ready gun. For Shadow 2, Tactical sports etc. It is easy to install , just like a proper maintenance job.

Original CZ Buffer

RC tech 9pcs Spring Set is the best upgrade for your CZ pistol. It transforms your CZ and lets you be a faster and more accurate shooter. Enables faster cycling, lighter and crispier trigger pull, easier magazine change...

CGW’s new CZ P-10 C short reset trigger. Drops in and produces a reduction in pre-travel.  The over-travel stop is built into the trigger body.

Shadow 2 Reach Reduction Kit with ultra-short reset now USPSA Production approved.  Cajun Gun Works’ famous RRK that permanently re-positions the trigger rearward with the hammer fully lowered an amazing 5 mm’s and reduces single action pre-travel dramatically.  Includes our “old style” stainless steel 85C trigger “Made in the USA”  with pre and over-travel screws so you can custom tune to your CZ.

This not only relocates the trigger, but it also doubles as an ultra-short reset for single action.  

Includes 2 different hammer pins (1 x HPIN and 1 x 75009) so you can be assured a secure attachment to either the factory hammer or Cajun Gun Works hammer.  Lifetime warranty to the original purchaser

RC-tech brass base for Metalform/CobraMag magazines. Adds weight to your magazine for easy, quick and consistent reloading.
We also recommend the RC-tech brass plates, which eases assembly/dissasembly and adds a bit of extra weight.

RC-tech lighter firing pin spring is designed to have less resistance when the hammer hits the fiting pin and thus alowing the use of a lighter main spring (hammer spring) wihch intern allows for a lighter trigger pull, especially in double action.

____________________

NOTE:

• Sold in set of 2 springs.

Funnel speeds up your magazine change. Also the grip with the magwell feels better. 

When using magwell, short style grips are needed.

Take your Shadow 2 or Shadow 1 from great to OMG!  This will transform your S-2, delivering an ice crisp SA of 3 lbs. or less.   DA typically runs 6 lbs. or less using our famous HS-12000 (11.5#) hammer spring.   The disconnector will require minor fitting so you get the reset to a PERFECT 1 mm, which is not difficult to do with CGW tech support.  Turns the CZ lock work into a precision Swiss watch!  USPSA Production legal too!

Slide stop spring pin CZ 75, SP-01

Bul 1911 modular trigger.

Trigger shoe B is included in the package.

NOTE

Other trigger shoes sold separately: https://cesar-shop.com/firearm...

RC-tech Progressive recoil Spring for CZ and TANFOGLIO pistols. Made form quality steel wire. Designed to manipulate recoil and to fine tune your pistol to your ammunition and load further improving perfrmance.

____________________

NOTE:

• Sold in sets of 2 springs

Precission made, they add  weight of the magazine, this means faster mag reloads.

Add some “Electric Viking Deco Spirit” to your weapon with these Ragnarok or Walkure Grips from the Andrew Bawidamann Designer series. Original in design and easy to carry, these Grips are as Aesthetically pleasing as they are Functional.

• TEXTURE: Medium • USE: Carry, Tactical, Range, Competition • MATERIAL: G10, Carbon Fiber

Set of pins, plungers and 2 springs for your 1911 or 2011 pistol

sear pin, ejector pin, barrellink pin, mainspring housing pin, hammer strut pin, sear pin, safety plunger, slide stop plunger, housingpin retainer, mainspring cup, mainspring cup pin, plunger spring and main (hammer) spring.

Colored Aluminium grips for CZ Shadow 2 and SP-01 models in long version  and short for magwell use with checkering that is extremely grippy. 

The checkering is CNC cut in the surface and has straight angles and is circular ( 360° directional grip) , therefore has more grip than any other on the market.

Matching the color is difficult on the picture due to no uniformity in devices so please look for the color on the group picture for closest resemblance of the original color.

Long grips are for guns that do NOT have a Magazine funnel fitted

Short grips are for guns that have a Magazine funnel fitted.

Completely cut from Aluminium on CNC machines.

Color is anodized.

The Infinity Firearms^® Magazine well available for traditional single stack 1911 pattern guns demonstrates that it is possible to build a better mousetrap. This magazine well attaches to the firearm by means of a specially machined mainspring housing. The lower front portion of the mainspring housing is machined to allow a projection from the magazine well to interlock around the mainspring housing retaining pin.

NOTE:

CZ 75 TS Orange and TS Green have thumb rest holes pre-drilled.

For standard CZ 75 TS holes need to be drilled!

The DAA 1911/2011 Ambidextrous Safeties with Shields are precision-made stainless-steel Safeties made with state-of-art Metal Injection Molding (MIM) technology. They are designed for use on any 2011 or 1911 pistol, with some minor fitting required. It is always recommended to have a competent Gun Smith fit safeties!

Cajun Gun Work’s exclusive floating trigger pin.  Can easily be installed and removed an unlimited number of times in minutes!  Now made from heat treated S-7 tool steel and hardened to RC-50.  This pin is so durable, CGW guarantees it with a Lifetime warranty!   Includes installation slave pin.  Fits all metal framed 75 CZ’s, Shadow, SP-01, P-01, PCR, 97, RAMI, etc.  Does not fit Tactical Sport.

With this MINUS connector you achive the best possible Glock Trigger.

These ship in sets of four in either stainless steel or blued steel for standard and slim line 1911 grips.

The Tactical Diamonds are the response to those who like the texture of a traditional Double Diamond grip but don't like the big diamond pattern around the screw holes. Keep in mind these are very grippy due to the fact that we can cut the diamond pattern a lot sharper in the G10.

• TEXTURE: Very Grippy • USE: Tactical, Tournament Shooter • MATERIAL: G10

BUL black magazine for SAS II 120mm.

These are the same basic design as the original Operators™, we just replaced the large aggressive checkering next to the front strap with an aggressive golfball pattern. We have also added a thumb recess for the magazine release. This is a very functional grip for the tournament shooter or those in the tactical high speed environment.

• TEXTURE: Very Aggressive • USE: Tactical, IPSC, IDPA, etc... • MATERIALS: G10, Micarta, Carbon Fiber

The evolution continues! The third offering in the Operator line of grips that we here at VZ started back 12 years ago. The Operator line is not only the best selling textured grip, but the most copied. Form follows function and beauty. With our new stippled texture offering it only made sense to wring out as much function by pairing it with the slants of the Operator series. Combining the two textures just like its predecessors in the series, it becomes a much more functional grip in the sense of allowing it to be used in more applications. From the concealed carry firearm to the tactical and tournament shooter it exceeds in all applications. Not least to mention its beauty that compliments any firearm.

Slide catch lever with thumb rest for CZ SH2, CZ75 D COMPACT and CZ75 TS.

8 round  high quality magazine for 1911 45ACP

10 round high quality mafazind for 1911 9mm

buy  more than 5 peaces and get 10% discount

Hex stainless steel bolt for grip 1911.

FEATURES

• Caliber .45
• Capacity 11 Extended

Mec-Gar after market magazines are constructed as an aftermarket alternative for the CZ 75B/85B Shdow 1, 2 Series of pistols. Mec-Gar constructs their magazines to specific tolerances to ensure optimal fit an operation. This magazines is designed to work with CZ 75B/85B Series models handguns chambered in 9mm Luger. This magazine will hold 17 rounds of ammunition and is made of steel and features a blued finish.