Pistol parts

This magwell is intended for open division shooters wanting to add weight to their gun with no modifications, this is a "plug and play" part.

For open division - will not fit the IPSC standard division box.

EXTREMELY HEAVY: 597g

CGW’s Pro-Package for Shadow and 85C. Everything you need to transform your CZ to a smooth 6lb DA (Double Action) and crisp 3lb or less SA (Single Action).

IDPA production legal, full upgrade kit. Includes everything for a 100% compliant competition ready drop-in package for all manual safety 75 series, 75B, 75B Compact, 40B, and SP-01, etc. NOTE: Recommended “Competition” and “Race” gun use only.Produces a 3# or less SA pull weight, not recommended for self-defense use. For all other applications, see our 75100 and 75110 upgrade kits. Absolutely No Substitutions.

When looking to upgrade the performance of a 1911 pistol, a common improvement sought by shooters is a high-quality trigger job, with a crisp, clean break. Until now, a high-quality trigger job has never been in the realm of a “drop-in” upgrade. Nighthawk Custom has changed that with the introduction of our Drop-In Trigger System (DTS) for 1911 pistols. An all-in-one unit, the DTS replaces your existing hammer, hammer strut, sear, disconnector, and sear spring. Your existing sear pin and hammer pin will be retained for use with the DTS, but no other parts are necessary for installation

Kit consisting of

Floating trigger pin, Barrel bushing SP-01, Ultra lite set, Race hammer kit, Sear spacer, Trigger return spring, Hammer pin, Shadow 2 only disconnector. 

The Infinity Firearms^® Magazine well available for traditional single stack 1911 pattern guns demonstrates that it is possible to build a better mousetrap. This magazine well attaches to the firearm by means of a specially machined mainspring housing. The lower front portion of the mainspring housing is machined to allow a projection from the magazine well to interlock around the mainspring housing retaining pin.

The Infinity Firearms^® Magazine well available for traditional single stack 1911 pattern guns demonstrates that it is possible to build a better mousetrap. This magazine well attaches to the firearm by means of a specially machined mainspring housing. The lower front portion of the mainspring housing is machined to allow a projection from the magazine well to interlock around the mainspring housing retaining pin.

Take your Shadow 2 or Shadow 1 from great to OMG!  This will transform your S-2, delivering an ice crisp SA of 3 lbs. or less.   DA typically runs 6 lbs. or less using our famous HS-12000 (11.5#) hammer spring.   The disconnector will require minor fitting so you get the reset to a PERFECT 1 mm, which is not difficult to do with CGW tech support.  Turns the CZ lock work into a precision Swiss watch!  USPSA Production legal too!

ZEV Trigger Bar: the ONLY professional GLOCK replacement trigger bar that reduces travel, and provides professional, crisp trigger pull while keeping all factory Glock safeties intact.

IDPA Production Legal upgrade kit for the manual safety CZ 75 models.  Fits all “classic” lock work manual safety 75 and 40B, including SP-01.  Everything you need excluding tools.  Our starter punch, part number SP is highly recommended.  Absolutely No Substitutions.

The newest compact addition for a pistol carbine conversion kit
The Micro RONI® is the newest compact addition for a pistol carbine conversion kit. The lightweight and sturdy platform for various Glocks and pistols are made of aluminum with a polymer body. The Micro RONI® features a folding stock for a sturdier position.

- No pistol disassembly required – Just place pistol into the kit and lock
- Equipped with a long top Picatinny rail, allowing a combination of sight, magnifier, and/or night vision
- Provides two extra side Picatinny rails on both right and left for mounting additional accessories
- Ambidextrous, easy and fast handling
- Ambidextrous trigger-guard safety
- Features a right-folding stock for easy concealment and carry
- Right and left serrated thumb-rests for better control on recoil and muzzle-rise* (Not Included)
- Front extra magazine carrier for fast reload
- Front integral tactical light (Not Included)
- Front and rear flip-up sight (Not Incldued)
- Fits only Glock gen’ 3+4 (with bottom picatinny rail), including compensated models (17, 22, 31 OR 19, 23, 32)*

Made Of: Poly+Alum
For Glock
Weight (ounce(s)):1587g, 56oz

MEASURMENTS
Width Max: 63,5mm, 2.5in
Height Max: 190,5mm, 5.7in
Length Max: 348mm, 13.7in


Not compatible with Glock 17 Generation 1 & 2 and Glock 19!

Introducing the newest Timney Trigger, the Alpha Competition Series for Glock Colored Race Gun Triggers (Patent Pending).

With a factory pull weight of 3 pounds, the Timney Alpha Competition trigger answers the long call for a trigger that has the same feel and performance that matches the reliability of the Glock system by providing an improved trigger design that does not sacrifice any part of the Glock reliability. Staying true to our 76-year-old promise to our customers, this trigger can be installed easily with no gunsmith needed.

Introducing the newest Timney Trigger, the Alpha Competition Series for Glock Colored Race Gun Triggers (Patent Pending).

With a factory pull weight of 3 pounds, the Timney Alpha Competition trigger answers the long call for a trigger that has the same feel and performance that matches the reliability of the Glock system by providing an improved trigger design that does not sacrifice any part of the Glock reliability. Staying true to our 76-year-old promise to our customers, this trigger can be installed easily with no gunsmith needed.

New generation of high performance magazines for BUL SAS II type. Made of heat treated 410 stainless steel for level of quality and durability. A spacer is not required for 9mm / .38 cartridges.

ZEV Trigger Bar: the ONLY professional GLOCK replacement trigger bar that reduces travel, and provides professional, crisp trigger pull while keeping all factory Glock safeties intact

MBX Complete Tubes were designed to be competition ready with exclusive features to meet the highest demands for today's shooters.

Designed as a replacement part for BUL AXE pistols. Also can be used to lighten trigger pull in Glock Gen3 & Gen4 models. With this trigger  set you pul weight is reducet to around 3,5lbs

- R-edition Lightweight hammer 12835

-R-edition Disconector 12517

-R-edition Sear 12417

all parts are Fully Machined SS

Brass open magwell for SAS II models (Ultimate Racer).

MBX Complete Tubes were designed to be competition ready with exclusive features to meet the highest demands for today's shooters.

MGAZINES HAVE MAG CATCH HOLE ONLY ON RIGHT SIDE. MAKE SHURE YOUR PISTOL/PCC HAS MAG CATCH ON BOTH OR ON RIGHT SIDE!

ZEV Trigger Bar: the ONLY professional GLOCK replacement trigger bar that reduces travel, and provides professional, crisp trigger pull while keeping all factory Glock safeties intact.

Scope mount inverted connection C-MORE Toni systems for Glock

BUL SAS II long magazine 170mm for 9mm - 28rd.

At the core of our PRO trigger is ZEV's new proprietary trigger bar and professional connector. These products deliver the crispest, cleanest trigger pull available. Finally, our new trigger pad features a revolutionary riveted assembly process that makes it the longest lasting and most reliable replacement trigger on the market.

At the core of our PRO trigger is ZEV's new proprietary trigger bar and professional connector. These products deliver the crispest, cleanest trigger pull available. Finally, our new trigger pad features a revolutionary riveted assembly process that makes it the longest lasting and most reliable replacement trigger on the market

Brass standard magwell dor SAS II models.

Introducing the Atlas Gunworks Perfect Feed 170mm Hi-Capacity 9mm/.38 Magazine with a Grams Engineering competition follower kit. The AGW redesigned, dimensionally correct magazine body is designed to work with the 2011 style pistol. COMPATIBLE with SPS/STI/SVI and other 2011 variants, DOES NOT work with BUL SAS Platform.

New generation of BUL SAS II grip, with stippled like texture. 

COMPATIBILITY

• Glock 17 (5th Gen)
• Glock 34 (5th Gen)
• Glock 45 (5th Gen)

Shadow 2 Reach Reduction Kit with ultra-short reset now USPSA Production approved.  Cajun Gun Works’ famous RRK that permanently re-positions the trigger rearward with the hammer fully lowered an amazing 5 mm’s and reduces single action pre-travel dramatically.  Includes our “old style” stainless steel 85C trigger “Made in the USA”  with pre and over-travel screws so you can custom tune to your CZ.

This not only relocates the trigger, but it also doubles as an ultra-short reset for single action.  

Includes 2 different hammer pins (1 x HPIN and 1 x 75009) so you can be assured a secure attachment to either the factory hammer or Cajun Gun Works hammer.  Lifetime warranty to the original purchaser

http://www.egwguns.com/1911-parts/tungsten-1911-5-guide-rod-1-pc/

Aftec Extractors End Extractor Malfunctions. Extractor tension is achieved by two springs that push on side of extractor. 

Kummer CZ Alu DotMatrix ERGO Grips are 3D designed and CNC machined, they have a golf ball pattern that provides enough texture to give the shooter confidence that they can grip the gun no matter the situation. Whether you are upgrading your existing pistol or designing the optimal competition pistol, these grips offer the sure grip that every shooter needs.

BUL stainless ambi safety is designed for all BUL 1911 and 2011/SAS models.

This new magwell has cutouts that allow the user to easily strip out a magazine in case of a malfunction and a slimmer profile than the SL magwell that still provides increased surface area for faster reloads without adding significant weight or size to the grip profile while carrying or concealing the gun. 

Aluminium open magwell for SAS II models (Ultimate Racer).

Bul tool-less guide rod kit.

G10 PosiTec – the Ultimate Ergonomically Shaped Aggressive Fine Diamond Checkered GRIPS with slots for TECHWELL and . Nothing in the 1911 world will fill a hand better. And they also fit into every competition box – USPSA, IDPA, and IPSC.

Taran Tactical Innovations Competition Magazine Well for 2011 provides the ultimate in reloading performance for your pistol. CNCd from Stainless Steal right here in America, our one-piece push pin design offers premium performance without the irritation of a two piece design. Forward ergonomic relief cuts provide comfort, while a rather large underside funnel to help increases the speed and success of quick reloads. 2.2 ounces of stainless steel provides weight for balance.

Fits Tamfoglio Extreme LARGE FRAME.

MAGWELL IN BRASS for STI model 2011.

Put some weight on your 2011. This Brass cut is a jewel and speeds up the magswitch on your gun.

MBX "Mini" PCC Competition 4" Extension Basepad with MBX Custom Spring