Pistol parts

FEATURES

• Caliber .45
• Capacity 10 Extended

FEATURES

• Caliber .45
• Capacity 11 Extended

Set of pins, plungers and 2 springs for your 1911 or 2011 pistol

sear pin, ejector pin, barrellink pin, mainspring housing pin, hammer strut pin, sear pin, safety plunger, slide stop plunger, housingpin retainer, mainspring cup, mainspring cup pin, plunger spring and main (hammer) spring.

Add some “Electric Viking Deco Spirit” to your weapon with these Ragnarok or Walkure Grips from the Andrew Bawidamann Designer series. Original in design and easy to carry, these Grips are as Aesthetically pleasing as they are Functional.

• TEXTURE: Medium • USE: Carry, Tactical, Range, Competition • MATERIAL: G10, Carbon Fiber

These ship in sets of four in either stainless steel or blued steel for standard and slim line 1911 grips.

The Tactical Diamonds are the response to those who like the texture of a traditional Double Diamond grip but don't like the big diamond pattern around the screw holes. Keep in mind these are very grippy due to the fact that we can cut the diamond pattern a lot sharper in the G10.

• TEXTURE: Very Grippy • USE: Tactical, Tournament Shooter • MATERIAL: G10

The evolution continues! The third offering in the Operator line of grips that we here at VZ started back 12 years ago. The Operator line is not only the best selling textured grip, but the most copied. Form follows function and beauty. With our new stippled texture offering it only made sense to wring out as much function by pairing it with the slants of the Operator series. Combining the two textures just like its predecessors in the series, it becomes a much more functional grip in the sense of allowing it to be used in more applications. From the concealed carry firearm to the tactical and tournament shooter it exceeds in all applications. Not least to mention its beauty that compliments any firearm.

These are the same basic design as the original Operators™, we just replaced the large aggressive checkering next to the front strap with an aggressive golfball pattern. We have also added a thumb recess for the magazine release. This is a very functional grip for the tournament shooter or those in the tactical high speed environment.

• TEXTURE: Very Aggressive • USE: Tactical, IPSC, IDPA, etc... • MATERIALS: G10, Micarta, Carbon Fiber

Barrel link

Extractor with 2 springs and plate

Hammer for 1911 and 2011 models

- For Standard 2011 and Open guns

Trigger for the 2011 pistol models

Aftec Extractors End Extractor Malfunctions. Extractor tension is achieved by two springs that push on side of extractor. 

Original magazine for Arex/Rexzero 1 Standard, Tactical or Alpha version. Magazine holds 18 or 20 rounds, caliber 9x19mm - 9mm Luger.

Freshly made base pad for Glock features a tight grip and deep side grooves which make sure your handling is swift and precise. It adds the extra needed surface area for one-handed manipulation. Magazine base pad fits into the original Glock magazine notches.

This Magazine Pad for Sig Sauer drastically improves the gripping action of your pouched magazines thanks to deep side grooves and added surface area.

Magazine Base Pad MaXXXGrip 

NOT FOR MAGWELL USE

Armanov Magazine Limiter is a simple and cheap solution for IPSC shooters. Never get your count wrong again. Works with all Mec-Gar double stack magazines with +2 rounds magazine base pads.

Armanov RACE Magazine Base pad for CZ gives you the best grip and durability. Designed with advanced sports and professional competition shooters. They are legal for IPSC production division and standard division (fits IPSC box) and IDPA. Precise cuts and grooves are machined across 3 sides to ensure you the fastest and the most precise reloads with one hand. The grip is really hard and will stay in place with a tight fit. Base pads also add one round to increase the magazine capacity from 17 to 18 and works perfectly with the standard stock magazine springs.

These baseplates WILL work with original CZ magwells 

This Base Pad for Sig Sauer P320 or P250 does this best; improve magazine handling speed and precision of your Sig pistol. It also adds +2 rounds to increase the magazine capacity using the stock magazine springs, but the superb handling and grip is what truly makes this base pad a worthwhile upgrade.

Improvs magazine handling speed and precision of your Sig P226, X5 or LDC pistol. IS MAGWELL COMPATTIBLE! It also adds +2 rounds to increase the magazine capacity from 17 to 19 using the stock magazine springs, but the superb handling and grip is what truly makes this base pad a worthwhile upgrade. 

Freshly designed from the ground up, top of the line Armanov Contoured SpidErgo Grips for full-size 1911 competition pistols made out of finest, most durable, aircraft grade aluminium. Special precision-machined texture, designed to keep your hand tight in place, it will make sure you get the most out of your competition performance. These SpidErgo grips are what you need to prevent any unwanted movement or sliding of your hand. 

Freshly designed Armanov SpidErgo Tanfoglio SF Grips are top of the line contoured SpidErgo Grips for your Tanfoglio competition pistol made out of finest, most durable, aircraft grade aluminium. Special precision-machined texture, designed to keep your hand tight in place, it will make sure you get the most out of your competition performance.

Introducing the Atlas Gunworks Perfect Feed 170mm Hi-Capacity 9mm/.38 Magazine with a Grams Engineering competition follower kit. The AGW redesigned, dimensionally correct magazine body is designed to work with the 2011 style pistol. COMPATIBLE with SPS/STI/SVI and other 2011 variants, DOES NOT work with BUL SAS Platform.

CGW 10X barrel bushing for the .550” diameter heavy barrel SP-01’s – Shadow 2, SP-01 manual safety and SP-01 Tactical in 9mm and .40 S&W.  Also fits 75B in .40.  Made from 4140 carbon steel and heat treated to RC 57-59, vastly superior to the loose fitting, soft, non-heat treated OEM bushing.  Only works with the standard 4.7” barrel, will not work with any extended or threaded barrels.  Reduces barrel muzzle play to -0- at lock-up.  This is a direct replacement for the OEM bushing.  Many shooters have verified a significant improvement in accuracy.

Note:  Very minor fitting may be required, can be installed in minutes with common tools.  Will not work with any threaded or extended barrel.

barrel bushing for the “standard barrel” 9mm manual safety and decocker pistols.  Fits: 75B in 9mm (will not fit the 75B .40, see our 7510X), P-01, PCR, 75B Compact, 85C and 85B.  Made from 4140 and heat treated to RC45.  Reduces barrel muzzle play to -0- at lock-up.  This is a direct replacement for the OEM bushing.  Fits .504” OD CZ’s.  USPSA Production Approved.

NOTE:  Some minor fitting may be required typically at the #46 retaining pin groove.

BUL brass +1 base pad for double stack magazines.

These BUL 1911 grips are made from carbon and offer an excellent grip with a wow esthetic factor.

Bul 1911 modular trigger.

Trigger shoe B is included in the package.

NOTE

Other trigger shoes sold separately: https://cesar-shop.com/firearm...