Select your country here
Please select your country
Panier vide
Pas d'items trouvés correspondants à votre critère de recherche
Original CZ Buffer
CGW’s new P-10-C short reset trigger. Drops in and produces a reduction in pre-travel. Deep inside the trigger we have installed a 3 mm x 6 mm pre-travel screw for those that want to custom tune their trigger for the ultimate in trigger control. The trigger is curved to position the trigger finger in the center of the trigger, resulting in a more consistent trigger pull. This curve also helps keep the trigger finger away from the bottom tip of the trigger. Made from billet aluminum.
This trigger is longer than the stock P-10-C plastic trigger, and has been extended as close to the bottom of the trigger guard as reliably possible. This longer trigger, combined with the curve, virtually eliminates trigger “sting” or “bite”. The center pivot is flush with the trigger face during use, resulting in a comfortable “all day” trigger.
Shadow 2 Reach Reduction Kit with ultra-short reset now USPSA Production approved. Cajun Gun Works’ famous RRK that permanently re-positions the trigger rearward with the hammer fully lowered an amazing 5 mm’s and reduces single action pre-travel dramatically. Includes our “old style” stainless steel 85C trigger “Made in the USA” with pre and over-travel screws so you can custom tune to your CZ.
This not only relocates the trigger, but it also doubles as an ultra-short reset for single action.
Includes 2 different hammer pins (1 x HPIN and 1 x 75009) so you can be assured a secure attachment to either the factory hammer or Cajun Gun Works hammer. Lifetime warranty to the original purchaser
Le ressort spécial RC-tech est réduit de 20% par rapport à l'original, le changer vous aidera à recharger plus rapidement
convient à la plupart des pistolets CZ
Fits Cobra mags, Dawson mags, Trip mags and Metallform mags.
Precision cut with RC logo.
Also available are Magazin spring plates in brass.
adds weight(50grams) to bottom for faster reload
La quantité minimum pour "CZ75 Firing Pin Spring Soft SOFT" est 2.
Take your Shadow 2 or Shadow 1 from great to OMG! This will transform your S-2, delivering an ice crisp SA of 3 lbs. or less. DA typically runs 6 lbs. or less using our famous HS-12000 (11.5#) hammer spring. The disconnector will require minor fitting so you get the reset to a PERFECT 1 mm, which is not difficult to do with CGW tech support. Turns the CZ lock work into a precision Swiss watch! USPSA Production legal too!
MAGWELL for Shadow 2
Speeding up your magazine insertion is one of the things to beat the competition. Also the grip with the Magwell feels beter. About the grips , they indeed need to be the short ones.
Here you find the short grips.
CZ Shadow 2 Safety Wide Right side, only Wing.
Slide stop spring pin CZ 75, SP-01
NOTE : without shue, you can choose you insert:
https://cesar-shop.com/product/trigger-shoe
Recoil spring for:
CZ sp-01, Tactical sport, Shadow2, CZ75
Tanfoglio Stock, Limited
La quantité minimum pour "Progressive Recoil Spring CZ - Tanfoglio 10 LBS" est 2.
WEB
The Infinity Firearms® Magazine well available for traditional single stack 1911 pattern guns demonstrates that it is possible to build a better mousetrap.
This magazine well attaches to the firearm by means of a specially machined mainspring housing. The lower front portion of the mainspring housing is machined to allow a projection from the magazine well to interlock around the mainspring housing retaining pin.
Two specially designed bolts "snug up" the mainspring housing are fully captive, which provides a few benefits:
1 - This write up assumes that the reader is already familiar with the procedure for installing the mainspring into the mainspring housing prior to assembly. If you are simply removing and then re-installing an existing Infinity® Traditional Single Stack Magazine Well, the mainspring housing will already contain the mainspring. If you are installing a new mainspring housing, and need to install the mainspring, please consult a reference on 1911 gunsmithing, and re-read the note at the top about eye protection before proceeding.
Add some “Electric Viking Deco Spirit” to your weapon with these Ragnarok or Walkure Grips from the Andrew Bawidamann Designer series. Original in design and easy to carry, these Grips are as Aesthetically pleasing as they are Functional.
• TEXTURE: Medium • USE: Carry, Tactical, Range, Competition • MATERIAL: G10, Carbon Fiber
Set of pins, plungers and 2 springs for your 1911 or 2011 pistol
sear pin, ejector pin, barrellink pin, mainspring housing pin, hammer strut pin, sear pin, safety plunger, slide stop plunger, housingpin retainer, mainspring cup, mainspring cup pin, plunger spring and main (hammer) spring.
Grips for the CZ Shadow 2 and SP-01 models, long version with checkering in Thick (79 grams) which adds 4 mm in thickness to the gun compared to Thin grips (49 grams).
Colored Aluminium grips for CZ Shadow 2 and SP-01 models in long version with checkering that is extremely grippy.
The checkering is CNC cut in the surface and has straight angles and is circular ( 360° directional grip) , therefore has more grip than any other on the market.
Matching the color is difficult on the picture due to no uniformity in devices so please look for the color on the group picture for closest resemblance of the original color.
Long grips are for guns that do NOT have a Magazine funnel fitted
Short grips are for guns that have a Magazine funnel fitted.
Completely cut from Aluminium on CNC machines.
Color is anodized.
Cajun Gun Work’s exclusive floating trigger pin. Can easily be installed and removed an unlimited number of times in minutes! Now made from heat treated S-7 tool steel and hardened to RC-50. This pin is so durable, CGW guarantees it with a Lifetime warranty! Includes installation slave pin. Fits all metal framed 75 CZ’s, Shadow, SP-01, P-01, PCR, 97, RAMI, etc. Does not fit Tactical Sport.
The DAA 1911/2011 Ambidextrous Safeties with Shields are precision-made stainless-steel Safeties made with state-of-art Metal Injection Molding (MIM) technology. They are designed for use on any 2011 or 1911 pistol, with some minor fitting required. It is always recommended to have a competent Gun Smith fit safeties!
Glock Factory Connector
Install the 4 pound connector! A standard Glock has 5,5 pound triggerpull !!
This part replaces the factory connector and provides a lighter trigger pull. This will increase the accuracy of most shooters by reducing the amount of muzzle movement when pulling the trigger.
Your trigger pull will be 4 lbs when you keep the 6 lbs factory firing pin spring, but if you Change that one out for a competition firing pin spring of 4 lbs you will get the 3,5 lbs trigger.
Less experienced shooters should ask a gunsmith to install this item.
These ship in sets of four in either stainless steel or blued steel for standard and slim line 1911 grips.
Now you can reload a 1911 Single Stack faster than you ever thought possible. The DP Ice Magwell dominates Action Shooting, and if you shoot a single stack, now you can find out why. The "Replaceable Ice Insert" is fast and forgiving. The super slick insert slides and glides the magazine right in, reducing missed reloads. Time is everything in Action Shooting and a blown reload can cost you a match, so why not have an advantage? The "Ice Advantage". Dawson Precision "KEY LOCKS" the 1911 ICE Magwell to our special checkered Mainspring Housing, both CNC machined to precision tolerances. Grip is solid and improved because of ergonomic design. Easy to install with tools and instructions included. Fits USPSA and IDPA boxes. Get them before the competition does. Available in Silver or Tactical Black. The profile is not too bulky and great for LE, carry or any shooter looking for a "SLICK as ICE" 1911 Single Stack reload. Fits USPSA and IDPA boxes. Legal for USPSA Single Stack Division! Aluminum Mainspring Housing w/Magwell and Insert Weigh 1.5 oz. Wanna try the No-Gap Ice Magwell? It's as easy as changing the insert! The only difference between the Standard and No-Gap 1911 Ice magwell is the insert!
The Benefit to No Gap - In the past, 1911 magazines were stopped by a tang in front that rested against a relief in the front of the frame. Hey, it's worked for 100 years, but that required magwells to be open in front, to allow the mag to seat fully.This made the front of the magwell not very forgiving during a speed reload. So we redesigned the whole system. This new insert fills the front gap with a super slick polymer that is "very" forgiving. Now you can have 360 degrees to funnel your 1911 mag into perfect position for consistent, blazing-fast reloads. All great things come at a price so we had to design a 1911 mag and basepads that exceeded the limits of all conventional design. We took it to a whole 'nother level!
The new mags are DP reliable, of course, and have CNC machined aircraft aluminum base pads, not plastic. We built them to withstand a nuclear blast (although we haven't tested that yet).
The Tactical Diamonds are the response to those who like the texture of a traditional Double Diamond grip but don't like the big diamond pattern around the screw holes. Keep in mind these are very grippy due to the fact that we can cut the diamond pattern a lot sharper in the G10.
• TEXTURE: Very Grippy • USE: Tactical, Tournament Shooter • MATERIAL: G10
These are the same basic design as the original Operators™, we just replaced the large aggressive checkering next to the front strap with an aggressive golfball pattern. We have also added a thumb recess for the magazine release. This is a very functional grip for the tournament shooter or those in the tactical high speed environment.
• TEXTURE: Very Aggressive • USE: Tactical, IPSC, IDPA, etc... • MATERIALS: G10, Micarta, Carbon Fiber
The evolution continues! The third offering in the Operator line of grips that we here at VZ started back 12 years ago. The Operator line is not only the best selling textured grip, but the most copied. Form follows function and beauty. With our new stippled texture offering it only made sense to wring out as much function by pairing it with the slants of the Operator series. Combining the two textures just like its predecessors in the series, it becomes a much more functional grip in the sense of allowing it to be used in more applications. From the concealed carry firearm to the tactical and tournament shooter it exceeds in all applications. Not least to mention its beauty that compliments any firearm.
follower not included
comes with PIN and screw
fits in IPSC, IDPA and USPSA box
weight 40 grams with pin and screw
Brass version
https://cesar-shop.com/product/1911-magwell-special-made-from-rc-tech
Metalform 9mm for 10 rounds with metal mechanism and nylon base pads, with a large fixing fracture for easy magazine removal.
Magazine for the CZ P-09 9x19 in 19 rounds capacity.
FEATURES
Magazine for Glock pistols and those who use Glock magazines.
Front sight pin CZ 75/85/83,SP-01, Shadow
CGW 10X barrel bushing for the .550” diameter heavy barrel SP-01’s – Shadow 2, SP-01 manual safety and SP-01 Tactical in 9mm and .40 S&W. Also fits 75B in .40. Made from 4140 carbon steel and heat treated to RC 57-59, vastly superior to the loose fitting, soft, non-heat treated OEM bushing. Only works with the standard 4.7” barrel, will not work with any extended or threaded barrels. Reduces barrel muzzle play to -0- at lock-up. This is a direct replacement for the OEM bushing. Many shooters have verified a significant improvement in accuracy.
Note: Very minor fitting may be required, can be installed in minutes with common tools. Will not work with any threaded or extended barrel.
Safety detent plunger spring
0420-0480-01ND
- R-edition Lightweight hammer 12835
-R-edition Disconector 12517
-R-edition Sear 12417
all parts are Fully Machined SS
Prevents expensive frame damage when shooting high-pressure, major power factor loads. Replaceable, poly-fiber washer installs behind the recoil spring on any length guide rod. The shock absorbing action stops the slide from battering the frame. Injection molded for the optimum balance between shock absorption and longevity. Replace every 1,000 rounds.
For Shadow 2 and Tactical sport need to be fitted
Hammer - Single Action and Double Action
HAMMER SA DA for models CZ 75, CZ 75 Compact, CZ 85, CZ 97, CZ SP-01
The installation must be done by an experienced gunsmith.
spring not included