Griffe & zusätzliche Rahmen

Add some “Electric Viking Deco Spirit” to your weapon with these Ragnarok or Walkure Grips from the Andrew Bawidamann Designer series. Original in design and easy to carry, these Grips are as Aesthetically pleasing as they are Functional.

• TEXTURE: Medium • USE: Carry, Tactical, Range, Competition • MATERIAL: G10, Carbon Fiber

These ship in sets of four in either stainless steel or blued steel for standard and slim line 1911 grips.

comes with PIN and screw

fits in IPSC, IDPA and USPSA box

weight 40 grams with pin and screw

Brass version

https://cesar-shop.com/product/1911-magwell-special-made-from-rc-tech

The Tactical Diamonds are the response to those who like the texture of a traditional Double Diamond grip but don't like the big diamond pattern around the screw holes. Keep in mind these are very grippy due to the fact that we can cut the diamond pattern a lot sharper in the G10.

• TEXTURE: Very Grippy • USE: Tactical, Tournament Shooter • MATERIAL: G10

The evolution continues! The third offering in the Operator line of grips that we here at VZ started back 12 years ago. The Operator line is not only the best selling textured grip, but the most copied. Form follows function and beauty. With our new stippled texture offering it only made sense to wring out as much function by pairing it with the slants of the Operator series. Combining the two textures just like its predecessors in the series, it becomes a much more functional grip in the sense of allowing it to be used in more applications. From the concealed carry firearm to the tactical and tournament shooter it exceeds in all applications. Not least to mention its beauty that compliments any firearm.

These are the same basic design as the original Operators™, we just replaced the large aggressive checkering next to the front strap with an aggressive golfball pattern. We have also added a thumb recess for the magazine release. This is a very functional grip for the tournament shooter or those in the tactical high speed environment.

• TEXTURE: Very Aggressive • USE: Tactical, IPSC, IDPA, etc... • MATERIALS: G10, Micarta, Carbon Fiber

Aluminium magwell from Dawson Precision for SVI and SV 2011 pistols

Aluminium magwell from Dawson Precision for SVI and SV 2011 pistols

High quality blued 1911 allen grip screws
a set of 4

Colored Aluminium grips for CZ 75 Models in long version with checkering that is extremely grippy. 

The checkering is CNC cut in the surface and has straight angles and is circular ( 360° directional grip) , therefore has more grip than any other on the market.

Matching the color is difficult on the picture due to no uniformity in devices so please look for the color on the group picture for closest resemblance of the original color.

Short grips are for guns that have a Magazine funnel fitted.

Completely cut from Aluminium on CNC machines.

Color is anodized.

We always have requests for an aggressive grip for the tactical members and weekend match goers. Something with a little bite. This is what we came up with, a big old nasty 5 dpi (diamond per inch) grip, made in G10. The Diamond Backs are by far the most aggressive grips we produce. We wouldn't recommend them for all day carry, but some do and swear by them.

These grips are a result of the success the VZ FRAG Pattern had in some of our 1911 grips. It only made sense to try it on the CZ 75, and it turned out really nice. They offer a nice medium texture that provides you with plenty of grip. The border on the edge of the grip gives you a nice smooth finish and really accents that VZ FRAG pattern well.

MAGWELL for Shadow 2 

Speeding up your magazine insertion is one of the things to beat the competition. Also the grip with the Magwell feels beter. About the grips , they indeed need to be the short ones.

Here you find the short grips.

The DAA Carbon 1911 Grips are 0.250 inch thick panels which create a surface that provides the flawless grip so critical for recoil control. The carbon offers a striking hi-tech appearance, and unparalleled durability. 
The tactical design includes a wide, deep, thumb cutaway which allows you unrestricted access to any mag-catch installed on your 1911. 

The CNC machined Carbon material is light weight extremely touch and is totally resistant to oils and solvents. 

These carbon grip panels offer not only improved performance when shooting your 1911, but also an attractive dark-colored carbon “techy” appearance. 

Each set include 4 stainless steel torx screws, with a custom head design, a torx key and are packed in a display-friendly blister-pack.

WEB

The Infinity Firearms^® Magazine well available for traditional single stack 1911 pattern guns demonstrates that it is possible to build a better mousetrap.

This magazine well attaches to the firearm by means of a specially machined mainspring housing. The lower front portion of the mainspring housing is machined to allow a projection from the magazine well to interlock around the mainspring housing retaining pin.

Two specially designed bolts "snug up" the mainspring housing are fully captive, which provides a few benefits:

• The magazine well will remain in place even if these bolts are loosened. The bolts serve to "snug up" the magazine well so there is absolutely no possibility of movement, but do not need to be tightened to hold the mag well in place.
• These bolts cannot be lost. They are captive, and can only be removed after the magazine well has been removed from the gun.
• Appearance - the "snake eye" holes used for Allen wrench access to these bolts are much smaller in diameter than the bolts.

Removal Instructions

• Insert a 1/16" Allen wrench into each of the snake eye holes, and rotate at least 1/2 turn clockwise. These retaining bolts have a narrow non-threaded section in the middle which bears against the mainspring housing pin when the bolts are rotated counterclockwise. The key here is that you are not "unscrewing" two parts, but shifting an interlocking "key" away from the pin upon which it bears.
• Drive the mainspring housing out of the gun, by inserting a drift punch into the dimpled end of this pin.
• Remove the mainspring housing by pulling down.

Attachment Instructions

• Since this magazine well overlaps the grips, the grips must be installed before the magazine well.
• Assemble the gun including the specially machined mainspring housing¹, but do not insert the mainspring housing pin.
• Make sure the two bolts are captive in the magazine well, and adjusted so the mainspring housing retaining pin can move freely without bringing on the bolts. (refer to the top left figure on this page for an example of the proper orientation).
• Remove the mainspring retaining pin from the magazine well, and place the magazine well on the gun.
• Insert the mainspring retaining pin, and use a 1/16" Allen wrench in each of the "snake eye" holes to rotate the bolts counter clockwise until they are snug.

¹ - This write up assumes that the reader is already familiar with the procedure for installing the mainspring into the mainspring housing prior to assembly. If you are simply removing and then re-installing an existing Infinity® Traditional Single Stack Magazine Well, the mainspring housing will already contain the mainspring. If you are installing a new mainspring housing, and need to install the mainspring, please consult a reference on 1911 gunsmithing, and re-read the note at the top about eye protection before proceeding.

WEB

The Infinity Firearms^® Magazine well available for traditional single stack 1911 pattern guns demonstrates that it is possible to build a better mousetrap.

This magazine well attaches to the firearm by means of a specially machined mainspring housing. The lower front portion of the mainspring housing is machined to allow a projection from the magazine well to interlock around the mainspring housing retaining pin.

Two specially designed bolts "snug up" the mainspring housing are fully captive, which provides a few benefits:

• The magazine well will remain in place even if these bolts are loosened. The bolts serve to "snug up" the magazine well so there is absolutely no possibility of movement, but do not need to be tightened to hold the mag well in place.
• These bolts cannot be lost. They are captive, and can only be removed after the magazine well has been removed from the gun.
• Appearance - the "snake eye" holes used for Allen wrench access to these bolts are much smaller in diameter than the bolts.

Removal Instructions

• Insert a 1/16" Allen wrench into each of the snake eye holes, and rotate at least 1/2 turn clockwise. These retaining bolts have a narrow non-threaded section in the middle which bears against the mainspring housing pin when the bolts are rotated counterclockwise. The key here is that you are not "unscrewing" two parts, but shifting an interlocking "key" away from the pin upon which it bears.
• Drive the mainspring housing out of the gun, by inserting a drift punch into the dimpled end of this pin.
• Remove the mainspring housing by pulling down.

Attachment Instructions

• Since this magazine well overlaps the grips, the grips must be installed before the magazine well.
• Assemble the gun including the specially machined mainspring housing¹, but do not insert the mainspring housing pin.
• Make sure the two bolts are captive in the magazine well, and adjusted so the mainspring housing retaining pin can move freely without bringing on the bolts. (refer to the top left figure on this page for an example of the proper orientation).
• Remove the mainspring retaining pin from the magazine well, and place the magazine well on the gun.
• Insert the mainspring retaining pin, and use a 1/16" Allen wrench in each of the "snake eye" holes to rotate the bolts counter clockwise until they are snug.

¹ - This write up assumes that the reader is already familiar with the procedure for installing the mainspring into the mainspring housing prior to assembly. If you are simply removing and then re-installing an existing Infinity® Traditional Single Stack Magazine Well, the mainspring housing will already contain the mainspring. If you are installing a new mainspring housing, and need to install the mainspring, please consult a reference on 1911 gunsmithing, and re-read the note at the top about eye protection before proceeding.

GRIPS CZ SHADOW 2 long checker

Grips by Toni Systems for CZ75 SP01. With special X3D contour which gives a better grip, long model.

GRIPS CZ SHADOW 2 long checker

Grips for the CZ Shadow 2 and SP-01 models, long version with checkering in Thick (79 grams) which adds 4 mm in thickness to the gun compared to Thin grips (49 grams).

Colored Aluminium grips for CZ Shadow 2 and SP-01 models in long version with checkering that is extremely grippy. 

The checkering is CNC cut in the surface and has straight angles and is circular ( 360° directional grip) , therefore has more grip than any other on the market.

Matching the color is difficult on the picture due to no uniformity in devices so please look for the color on the group picture for closest resemblance of the original color.

Long grips are for guns that do NOT have a Magazine funnel fitted

Short grips are for guns that have a Magazine funnel fitted.

Completely cut from Aluminium on CNC machines.

Color is anodized.

Product Details

Created as an evolution of the original MOE 1911 Grip Panels, the 1911 Grip Panels with TSP texture offers the user a more aggressive texture allowing for better control of the weapon in all environments.

Constructed of heavy-duty reinforced polymer, the grips have a unique diamond-shaped cross section to prevent twisting in the hand, an aggressive magazine release cut-out, aggressive TSP texture (Trapezoidal Surface Projections) for positive control, and are compatible with ambidextrous safeties. The grips are designed to fit full size framed 1911s with standard grip screw bushings.

Made in U.S.A.

Features

• Fits Full Size Frame 1911s and copies with standard grip screw bushings
• Reinforced polymer construction
• Unique diamond-shaped cross-section to prevent twisting in the hand
• Aggressive magazine release cut-out
• Compatible with ambidextrous safeties
• Aggressive TSP texture (Trapezoidal Surface Projections) for positive control in all environments

The instructors for Magpul's training division wanted a 1911 grip with advanced features, improved control characteristics, and Magpul value. These grips were designed with their input and testing.

Constructed of heavy-duty reinforced polymer, MOE 1911 Grip Panels have a unique diamond-shaped cross section to prevent twisting in the hand, aggressive magazine release cut-out, positive anti-slip texture, and are compatible with ambidextrous safeties. The grips are designed to fit full size framed 1911s with standard grip screw bushings.

Made in U.S.A.

Features

• Fits Full Size Frame 1911s and copies with standard grip screw bushings
• Reinforced polymer construction
• Unique diamond-shaped cross-section to prevent twisting in the hand
• Aggressive magazine release cut-out
• Compatible with ambidextrous safeties
• Positive, anti-slip texture

Magwell for the 2011 STANDARD pistol.

- For Standard 2011 and Open guns

Magwell for the 1911 STANDARD pistol. Fits IPSC Box.

Now you can reload a 1911 Single Stack faster than you ever thought possible. The DP Ice Magwell dominates Action Shooting, and if you shoot a single stack, now you can find out why. The "Replaceable Ice Insert" is fast and forgiving. The super slick insert slides and glides the magazine right in, reducing missed reloads. Time is everything in Action Shooting and a blown reload can cost you a match, so why not have an advantage? The "Ice Advantage". Dawson Precision "KEY LOCKS" the 1911 ICE Magwell to our special checkered Mainspring Housing, both CNC machined to precision tolerances. Grip is solid and improved because of ergonomic design. Easy to install with tools and instructions included. Fits USPSA and IDPA boxes. Get them before the competition does. Available in Silver or Tactical Black. The profile is not too bulky and great for LE, carry or any shooter looking for a "SLICK as ICE" 1911 Single Stack reload. Fits USPSA and IDPA boxes. Legal for USPSA Single Stack Division!  Aluminum Mainspring Housing w/Magwell and Insert Weigh 1.5 oz. Wanna try the No-Gap Ice Magwell? It's as easy as changing the insert! The only difference between the Standard and No-Gap 1911 Ice magwell is the insert!

The Benefit to No Gap - In the past, 1911 magazines were stopped by a tang in front that rested against a relief in the front of the frame. Hey, it's worked for 100 years, but that required magwells to be open in front, to allow the mag to seat fully.
This made the front of the magwell not very forgiving during a speed reload. So we redesigned the whole system. This new insert fills the front gap with a super slick polymer that is "very" forgiving. Now you can have 360 degrees to funnel your 1911 mag into perfect position for consistent, blazing-fast reloads.  All great things come at a price so we had to design a 1911 mag and basepads that exceeded the limits of all conventional design. We took it to a whole 'nother level!

The new mags are DP reliable, of course, and have CNC machined aircraft aluminum base pads, not plastic. We built them to withstand a nuclear blast (although we haven't tested that yet).