Select brand
 
Brand

ADVANCED SEARCH

Grips & magwells

409.02  

This magwell is intended for open division shooters wanting to add weight to their gun with no modifications, this is a "plug and play" part.

For open division - will not fit the IPSC standard division box.

EXTREMELY HEAVY: 597g

In stock
+

163.52 327.05  

The Infinity Firearms® Magazine well available for traditional single stack 1911 pattern guns demonstrates that it is possible to build a better mousetrap. This magazine well attaches to the firearm by means of a specially machined mainspring housing. The lower front portion of the mainspring housing is machined to allow a projection from the magazine well to interlock around the mainspring housing retaining pin.

In stock
+

228.93 327.05  

The Infinity Firearms® Magazine well available for traditional single stack 1911 pattern guns demonstrates that it is possible to build a better mousetrap. This magazine well attaches to the firearm by means of a specially machined mainspring housing. The lower front portion of the mainspring housing is machined to allow a projection from the magazine well to interlock around the mainspring housing retaining pin.

In stock
+

261.48  

The newest compact addition for a pistol carbine conversion kit
The Micro RONI® is the newest compact addition for a pistol carbine conversion kit. The lightweight and sturdy platform for various Glocks and pistols are made of aluminum with a polymer body. The Micro RONI® features a folding stock for a sturdier position.

- No pistol disassembly required – Just place pistol into the kit and lock
- Equipped with a long top Picatinny rail, allowing a combination of sight, magnifier, and/or night vision
- Provides two extra side Picatinny rails on both right and left for mounting additional accessories
- Ambidextrous, easy and fast handling
- Ambidextrous trigger-guard safety
- Features a right-folding stock for easy concealment and carry
- Right and left serrated thumb-rests for better control on recoil and muzzle-rise* (Not Included)
- Front extra magazine carrier for fast reload
- Front integral tactical light (Not Included)
- Front and rear flip-up sight (Not Incldued)
- Fits only Glock gen’ 3+4 (with bottom picatinny rail), including compensated models (17, 22, 31 OR 19, 23, 32)*

Made Of: Poly+Alum
For Glock
Weight (ounce(s)):1587g, 56oz

MEASURMENTS
Width Max: 63,5mm, 2.5in
Height Max: 190,5mm, 5.7in
Length Max: 348mm, 13.7in


Not compatible with Glock 17 Generation 1 & 2 and Glock 19!


163.12  

Brass open magwell for SAS II models (Ultimate Racer).

In stock
+



130.33  

Brass standard magwell dor SAS II models.


119.63  
The super slick insert slides and glides the magazine right in, reducing missed reloads. Time is everything in Action Shooting and a blown reload can cost you a match, so why not have an advantage? The "Ice® Advantage".
In stock
+

118.84  
Set combines short grips designed in a squarish elliptical shape and with aggressive checkering for a perfect grip suitable for all kind of hands (big or small) and magwell, which fully fuse with grips, for better control of the gun while shooting due to a larger contact surface. A large...
In stock
+

114.75  
In stock
+

114.75  

New generation of BUL SAS II grip, with stippled like texture. 

In stock
+

114.75  
New generation of BUL SAS II grip in GREY color, with stippled like texture.
In stock
+

114.71  

COMPATIBILITY

  • Glock 17 (5th Gen)
  • Glock 34 (5th Gen)
  • Glock 45 (5th Gen)

106.48  
These Ultimate grips are CNC machined from solid brass for added weight. A G10 Insert designed by Eric Grauffel based on the CZ graphic chart is installed for added traction.
In stock
+

106.15  
In stock
+

105.17  

Kummer CZ Alu DotMatrix ERGO Grips are 3D designed and CNC machined, they have a golf ball pattern that provides enough texture to give the shooter confidence that they can grip the gun no matter the situation. Whether you are upgrading your existing pistol or designing the optimal competition pistol, these grips offer the sure grip that every shooter needs.

In stock
+

99.99  
XL
The Eemann Tech Ultimate Brass Long Grips are made of brass and have a rough surface for a strong grip, giving you better control and performance when shooting.
In stock
+

98.56  

This new magwell has cutouts that allow the user to easily strip out a magazine in case of a malfunction and a slimmer profile than the SL magwell that still provides increased surface area for faster reloads without adding significant weight or size to the grip profile while carrying or concealing the gun. 

In stock
+

93.44 98.36  

Aluminium open magwell for SAS II models (Ultimate Racer).

In stock
+

98.32  

G10 PosiTec – the Ultimate Ergonomically Shaped Aggressive Fine Diamond Checkered GRIPS with slots for TECHWELL and . Nothing in the 1911 world will fill a hand better. And they also fit into every competition box – USPSA, IDPA, and IPSC.

In stock
+

98.28  

Taran Tactical Innovations Competition Magazine Well for 2011 provides the ultimate in reloading performance for your pistol. CNCd from Stainless Steal right here in America, our one-piece push pin design offers premium performance without the irritation of a two piece design. Forward ergonomic relief cuts provide comfort, while a rather large underside funnel to help increases the speed and success of quick reloads. 2.2 ounces of stainless steel provides weight for balance.


97.54  
LONG THIN
In stock
+

97.54  
Speed up your reloads with the Shield Arms magwell for the Glock 43X/48.

96.31  

Fits Tamfoglio Extreme LARGE FRAME.

In stock
+

95.96  
The Eemann Tech Competition Brass Magwell (Magazine funnel) for CZ 75 Tactical Sports & CZ TS 2 will make your reloading faster and easier. The goal of brass magwell is to increase the weight of the bottom of the gun, making it more stable during the shooting.
In stock
+

95.94  

MAGWELL IN BRASS for STI model 2011.

Put some weight on your 2011. This Brass cut is a jewel and speeds up the magswitch on your gun.

In stock
+

90.16  
Kummer CZ Alu DotMatrix Grips are designed and CNC machined, providing an aggressive texture that gives the shooter a confident grip no matter the situation. Whether upgrading your existing pistol or designing the optimal competition pistol, these grips offer the sure grip that every shooter needs.
In stock
+

88.57  
In stock
+

88.53  

Short grip is designed to be used with magwell.


88.53  

Grip plates are made for use without magwell.

In stock
+

88.53  
In stock
+

88.53  
In stock
+

88.53  

TONI X3D Grip Tanfoglio Stock II Short Larde Frame.

In stock
+

88.53  
In stock
+

88.53  
In stock
+

88.53  
In stock
+

88.53  
In stock
+

86.07  
In stock
+

86.06  
S
Made from Brass that increases the weight of the pistol and improves the balance when shooting. The grips are attached with the factory screws and a spare set is provided. To avoid the grip panels becoming loose we recommend the use of Blue loctite or mild strength thread locker. Self-adhesive grip tape is provided for attachment to each grip panel with a spare set provided.  There are also rectangular shaped grip tape for use on the front and backstop of your pistol if allowed by your division rules. The SHORT grips are designed to work with and accommodate a Magwell!
In stock
+

85.20  
The IPSC Legal 1911 Magwell! Developed For IPSC Classic Division, 34.9mm wide. These low profile magwells are machined out of solid aircraft aluminum, and come with a aircraft aluminum mainspring housing. There is no Ice Insert in this Magwell, it does have very large opening to help with fast...

83.65  

Pimp Your Glock !!

GLOCK MAGWELL OPEN for Models 17/19/22/34/35 Gen. 4 Code: MGL4

GLOCK MAGWELL STANDARD for Models 17/19/22/34/35 Gen. 4 Code: MGL4S


In stock
+


83.61  
In stock
+

81.97  

Magwell for the 1911 STANDARD pistol. Fits IPSC Box.

In stock
+

81.93  
Techwell 1911 IPSC XT Magwell is IPSC, USPSA, AND IDPA legal! Made from the same rugged, machined aluminum components as Techwell’s Carry, TGO, and SP models, the XT sports the largest 360 degree opening of all currently available 1911 magwells. Rob Letaham won USPSA Limited 10...

81.93  
Techwell IPSC TGO Magwell is IPSC, USPSA and IDPA Legal! Designed by “The Great One” himself, Rob Leatham, with the same rugged, machined aluminum components as Techwell’s SP, Carry, and XT models, but the TGO model introduces a wide and smooth streamlined magwell opening that...

81.93  

Designed for any 8-round magazine with standard or extended base pad and/or 10-round magazines, the Techwell System enhances shooter’s grip and aids in fast, positive magazine changes for an edge in competition or combat.

1 2 3